CYP CH-1107EX Manuale utente
CH-1107EX
HDMI/CAT6 to Single CAT6 Extender
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VS1 25/10/11 First Release
VR2 16/04/12 CAT6 Type Error
CONTENTS
1. Introduction..............................................1
2. Applications.............................................1
3. Package Contents .................................. 1
4. System Requirements.............................. 1
5. Features.................................................... 1
6. Operation Controls and Functions......... 2
6.1 Front Panel ..........................................2
6.2 Rear Panel...........................................3
7. Connection Diagram .............................. 4
8. Specications .......................................... 5
9. Acronyms .................................................5
1
1. INTRODUCTION
The HDMI™/CAT6 to Single CAT6 Extender is an advanced solution for
HDMI and CAT6 signal distribution. The CAT6 output port can be easily
connected to CAT6 to HDMI receivers to allow a stable connection
between an HDMI source and any compatible HDMI display.
Alternatively, it can be cascaded to extend the signal to several
hundred meters.
2. APPLICATIONS
• Smart AV Installation for HDMI signal extension
• Household entertainment media sharing
3. PACKAGE CONTENTS
• HDMI/CAT6 to single CAT6 extender
• Operation Manual
• 5 V/1 A DC Power Supply Adaptor
4. SYSTEM REQUIREMENTS
Input HDMI/DVI source equipment or HDMI to single CAT6 transmitter
and output to single CAT6 to HDMI receiver.
5. FEATURES
• HDCP 1.1 and DVI 1.0 compliant.
• HDMI v1.3 with Deep Color video up to 12-bit, 1080p@24/60 Hz.
• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32–192 kHz Fs sample rate).
• Supports a wide range of PC and HDTV resolutions from VGA to
WUXGA and 480i to 1080p.
• Fully HDCP Compliant.
• EDID 8/12-bit setting switch.
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
EDID
INPUT
8 Bit 12 Bit
HDMI CAT6
CAT6 OUT
1 2 3
1HDMI/CAT6 Input Switch
This switch allows users to select either HDMI or CAT6 as the input
source.
2EDID 8/12-bit switch
This switch allows users to change the output display’s EDID
between 8- or 12-bit resolution.
3CAT6 Out
This port is to connect to a single CAT6 to HDMI receiver device
attached to an output display.
3
6.2 Rear Panel
DC 5V
HDMI
INPUT
CAT6
1 2 3
1
CAT6 Input
This port connects a single CAT6 transmitter device attached to a
source device by HDMI.
2
HDMI Input
HDMI connector to connect a suitably equipped source device
such as DVD/Blu-ray player.
3
DC 5V
This socket is where you plug the 5 V DC PSU into the unit,
connect the PSU to an AC outlet.
NOTE
A.Unit tested with CAT6/23AWG/Solid cable, using cables of another
specication may result in a different operating distance.
B.Source equipment used in cable distance testing included: Sony
Playstation 3 (120 GB model), 37″ Philips 8-bit LCD TV and 40″
Samsung 12-bit LCD TV.
C.Figures provided in this manual are for reference only, actual
performance may vary according to which source and display are
used as well as the type of cable used.
4
7. CONNECTION DIAGRAM
DVD or Blu-ray Player HDMI to Single CAT6
Transmitter
CAT6 Cable
(45 M/8-bit)
CAT6 Cable
(45 M/8-bit)
Single CAT6
to HDMI
Transmitter
Single CAT6 to
HDMI Receiver
Display Monitor or TV
HDMI Cable
(15 M/8-bit)
Option 1 Option 2 Option 3
EDID
INPUT
8 Bit 12 Bit
HDMI CAT6
CAT6 OUT
EDID
INPUT
8 Bit 12 Bit
HDMI CAT6
CAT6 OUT
DC 5V
HDMI
INPUT
CAT6
TV/STD
10 Bit
CAT6 OUT
EDID
8 Bit 12 Bit
CAT6 OUT
DC 5V
POWER
HDMI IN
SYNC-RED
3D-ORG
PU-Q1H8CS
CAT6 OUT
1
CAT6 OUT
8
CAT6 OUT
7
DC 5V
HDMI
INPUT
CAT6
DC 5V
HDMI
INPUT
CAT6
DC 5V
HDMI
INPUT
CAT6
DC 5V
POWER
HDMI IN
SYNC-RED
3D-ORG
PU-Q1H8CS
CAT6 OUT
1
CAT6 OUT
8
CAT6 OUT
7
DC 5V
HDMI INPUT
CAT6 OUT
5
8. SPECIFICATIONS
Video Bandwidth 2.25 MHz/6.75Gbps
Input Ports 1 × HDMI female port , 1 × CAT6 input
Output Ports 1 × CAT6 output
EDID TV
HDMI Cable In 1080p 8-bit (15 m), 12-bit (15 m)
CAT6 Cable In/Out 1080p 8-bit (7~45 m), 12-bit (7~15 m)
HDMI Resolution 480i~1080p50/60, 1080p24, VGA~WUXGA
ESD Protection Human body model: ±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5 V DC/1 A linear power adaptor
(US/EU standards,CE/FCC/UL certied)
or 5 V/1.2 A switching power adaptor
(with universal plug, CE/FCC/UL certied)
Dimensions 78.5 mm (W) × 102 mm (D) × 30 mm (H)
Weight 182 g
Chassis Material Metal
Silkscreen Colour Silver
Power Consumption 4.1 W
Operating Temperature 0 ˚C~40˚C/32 ˚F~104 ˚F
Storage Temperature −20˚C~60 ˚C/−4 ˚F~140˚F
Relative Humidity 20~90% RH (non-condensing)
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT6 Category 6 Cable
HDMI High Denition Multimedia Interface
Altri manuali per CH-1107EX
1
Indice
Altri manuali CYP Estensione
CYP
CYP CH-1109TXC Manuale utente
CYP
CYP PU-513L-KIT Manuale utente
CYP
CYP CH-1109TXC Manuale utente
CYP
CYP PU-106 Manuale utente
CYP
CYP CH-506TXPL Manuale utente
CYP
CYP CA-USBLT Manuale utente
CYP
CYP PU-506-KIT Manuale utente
CYP
CYP PU-506-KIT Manuale utente
CYP
CYP PRO-3GSDIHDMI Manuale utente
CYP
CYP CH-506TX Manuale utente
CYP
CYP PUV-1530TXRX Manuale utente
CYP
CYP PU-USB-AL Manuale utente
CYP
CYP CETH-4USB Manuale utente
CYP
CYP PU-USBX Manuale utente
CYP
CYP PU-DVI513L-KIT Manuale utente
CYP
CYP Suprex SPX-7400 Series Manuale utente
CYP
CYP PUV-1510RX Manuale utente
CYP
CYP CH-506TXPLRXPL Manuale utente
CYP
CYP CH-514RXL Manuale utente
CYP
CYP IP-6000TXRX Manuale utente
