CYP PU-103 Manuale utente
OPERATION MANUAL
PU-103
v1.3 HDMI over CAT6 Extender
Set
PU-103_Manual-EN.indd 1 03/05/2011 12:05:24
Table of Contents
1. Introduction 1
2. Features 1
3. Package Contents 1
4. Operation Controls and Functions 2
4.1 Front Panel Diagram 2
4.2 Rear Panel Diagram 2
5. Connection Diagram 3
6. Specications 3
PU-103_Manual-EN.indd 2 03/05/2011 12:05:38
Page 1
1. Introduction
All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution
to extend HDMI signals via CAT cabling up to 40m. For even longer distances, also
use the PU-108 repeater, which can be cascaded.
2. Features
• v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant.
• HDMI over CAT6 Extender Set.
• Resolutions supported: PC - VGA to WXGA; HDTV - 480i to 1080p plus
1080p24fps.
• High Denition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio plus LPCM.
• Compatible with CAT-5E and CAT-6 cables. CAT-6 is recommended for better
performance.
• Supports CEC functions.
• Supports ‘Deep Colour’ (10 & 12 bit).
• Equalises and recovers incoming TMDS data before re-transmitting to ensure
optimum signal quality.
• Supports xvYCC
• Supports 3D signals
3. Package Contents
• HDMI to CAT6 Transmitter.
• 5V DC power supply adaptor.
• Operation Manual.
PU-103_Manual-EN.indd 1 03/05/2011 12:05:39
Page 2
4. Operation Controls and Functions
4.1 Front Panel
1. 1 HDMI input: Connect the HDMI input port to the HDMI or DVI output of your
source equipment such as DVD player or set-top-box.
2. Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC
wall outlet.
DC 5V
POWER
HDMI INPUT
1 2
4.2 Rear Panel
1 2
VIDEODDC
CAT6 OUTPUT
1. DDC output: Connect the DDC output to the DDC input of the receiver unit using
CAT-6 cable.
2. Video output: Connect the video output to the video input of the receiver unit
using CAT-6 cable.
PU-103_Manual-EN.indd 2 03/05/2011 12:05:40
Page 3
1. DDC output: Connect the DDC output to the DDC input of the receiver unit using
CAT-6 cable.
2. Video output: Connect the video output to the video input of the receiver unit
using CAT-6 cable.
5. Connection Diagram
Input Port
Transmitter: 1x HDMI female port, 1x IR jack,
Receiver: 2 x CAT5e/6, 1 x IR Jack
Output Port
Transmitter: 2 x CAT5e/6, 1 x IR Jack
Receiver: 1x HDMI female port, 1x IR jack
HDMI Output Audio Formats
LPCM 7.1, 5.1 or 2 channels and Bitstream (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master
Audio)
Analogue Output port 4 x 3.5mm Stereo mini jack
Multi channel output ports 1 x Optical
Multi channel output audio
formats Dolby 5.1/2 and LPCM 2 channels
Power Supply 2 x 5V/2.6A DC (US/EU standards, CE/FCC/UL
certied)
Dimensions (mm) 80(W) x 72(D) x 30(H)
PU-103_Manual-EN.indd 3 03/05/2011 12:05:44
Notes:
PU-103_Manual-EN.indd 4 03/05/2011 12:05:59
www.cypeurope.com
PU-103_Manual-EN.indd 5 03/05/2011 12:06:12
Altri manuali per PU-103
1
Indice
Altri manuali CYP Estensione
CYP
CYP CH-506TX Manuale utente
CYP
CYP PUV-1510RX Manuale utente
CYP
CYP PU-514L-KIT Manuale utente
CYP
CYP IP-7000RX Manuale utente
CYP
CYP CH-U350TX Manuale utente
CYP
CYP CDVI-513TXL Manuale utente
CYP
CYP PU-1109KIT Manuale utente
CYP
CYP PUV-2000TX Manuale utente
CYP
CYP SDV-FTX Manuale utente
CYP
CYP CH-513TXL Manuale utente
CYP
CYP CLUX-SDI2OF Manuale utente
CYP
CYP PU-513L-KIT Manuale utente
CYP
CYP CH-1601TXRX Manuale utente
CYP
CYP CH-506TX Manuale utente
CYP
CYP PU-USB-KIT Manuale utente
CYP
CYP CH-506RX Manuale utente
CYP
CYP PU-506-KIT Manuale utente
CYP
CYP CIR-03 Manuale utente
CYP
CYP PU-USB-AL Manuale utente
CYP
CYP SDV-FTX Manuale utente
