CYP PU-232 Manuale utente
OPERATION MANUAL
PU-232
RS-232 Control Over CAT5/6
Extender Set
Table of Contents
1. Introduction 1
2. Features 1
3. Package Contents 1
4. Operation Controls and Functions 2
4.1 Front Panel Diagram 2
4.2 Rear Panel Diagram 3
5. Connection Diagram 4
6. Specications 4
Page 1
1. Introduction
The CAT5/6 RS-232 extender is an affordable, hardware-based solution providing
control of any RS-232 protocol device. This transmitter and receiver set will extend
the control of RS-232 for over 250 meters. The RS-232 extender also provides full
duplex transmission and hardware handshake signals, with no need for any set
up or conguration.
2. Features
• Extends any RS-232 compliant device up to 250 metres from the source to
display.
• Requires only one CAT5/6 cable.
• Perfect for digital signage applications.
• Baud Rate: 110~921600. Data bit: 8bit.
• Simple installation and operation.
3. Package Contents
• PU-232 Transmitter.
• PU-232 Receiver.
• 5V DC power adaptor.
• Operation Manual.
Page 2
4. Operation Controls and Functions
4.1 Front Panel
1. Connect with CAT 5 cable up to 250M and link to Receiver side’s CAT 5
connector.
2. Connect the 5V DC power adaptor into the unit and plug the adaptor to AC wall
outlet.
Note:
1. Only an adaptor is needed for both Transmitter and Receiver.
3. Connect to source device with DB 9 male to female cable for receiving and
communicating with PC/Laptop.
12 3
CAT5
DC 5V
RS-232 IN
Page 3
4.2 Rear Panel
1. Connect to PC/laptop‘s main control system with DB 9 female to male cable for
sending protocol to source device.
2. Connect from Transmitter side the CAT 5 cable.
3. Connect the 5V DC power adaptor.
Note:
1. Only one adaptor is needed for both Transmitter and Receiver however, if no
image display then two adaptor will be required.
RS-232 OUT CAT5
DC 5V
1 2 3
Page 4
5. Connection Diagram
6. Specications
Input Port 1 x RS-232 D-Sub-9 female
1 x CAT 5/6
Output Port 1 x RS-232 D-Sub-9 male
1 x CAT 5/6
Power Supply 2 x 5V/1A DC (US/EU standards, CE/FCC/UL
certied)
Dimensions (mm) 80(W) x 72(D) x 30(H)
Weight (g) 260
Chassis Material Aluminium
Silk Skin Colour Black
Operating Temperature Operating from 0°C ~ 40°C
Notes:
www.cypeurope.com
Altri manuali per PU-232
1
Indice
Altri manuali CYP Estensione
CYP
CYP CH-506TXL Manuale di istruzioni
CYP
CYP SDV-FTX Manuale utente
CYP
CYP PUV-1530TXRX Manuale utente
CYP
CYP CH-1109TX Manuale utente
CYP
CYP CH-710TX Manuale utente
CYP
CYP PU-506-KIT Manuale utente
CYP
CYP IR-EXT3 Manuale utente
CYP
CYP CH-1601TXRX Manuale utente
CYP
CYP PU-514L-KIT Manuale utente
CYP
CYP CH-506TXPL Manuale utente
CYP
CYP CH-1527TXPL Manuale utente
CYP
CYP CS-HH Manuale utente
CYP
CYP CH-1602TX Manuale utente
CYP
CYP CH-506TX Manuale utente
CYP
CYP CH-1529TX Manuale utente
CYP
CYP CIR-03 Manuale utente
CYP
CYP CH-1106TX & RX Manuale utente
CYP
CYP PU-HBTPL-ZE Manuale utente
CYP
CYP CDVI-513TXL Manuale utente
CYP
CYP PU-232 Manuale utente
