CYP SDV-FTX Manuale utente

OPERATION MANUAL

SDV-FTX/FRX

Ultra-HDMI (4K/60) over Fiber extender

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 11/05/2018 First release

v1.01 08/02/2019 Corrections to extended functionality

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................8

6. Operation Controls and Functions .......9

6.1 Transmitter's Front Panel ........................ 9

6.2 Transmitter's Rear Panel ........................10

6.3 Receiver's Front Panel ............................11

6.4 Receiver's Rear Panel..............................12

6.5 IR Cable Pinouts .......................................13

6.6 Basic AV Extension ..................................14

7. Connection Diagram .......................... 15

8. Specifications...................................... 16

8.1 Transmitter's Technical Specification16

8.2 Receiver's Technical Specifications ...17

8.3 Video Specifications................................18

8.4 Audio Specifications...............................20

8.5 Cable Specifications ...............................21

9. Acronyms............................................. 22

1. INTRODUCTION

This Transmitter and Receiver set is designed for high-quality, IP routable,

AV extension with minimum latency. By using a sophisticated ultra-

light compression scheme (lossless for most content) it’s a great solution

for extending 4K audio/video streams (HDMI or DisplayPort) and data.

Advanced HDMI content such as HDR (High Dynamic Range), 10-bit

colour and multi-channel HD Bitstream audio can be transmitted in

pass-through mode. The use of interchangeable, field replaceable, SFP+

modules allows for transmission distances of up to 30km (Maximum

transmission distance depends on the SFP+ modules used.). Multiple

control and data signals may also be transmitted along with the audio

and video, including IR, RS-232, USB (for KVM) and Ethernet.

2. APPLICATIONS

Video, USB, Audio, LAN, IR, and RS-232 over fiber extension

Long distance data and video transmission immune to RF interference

Remote KVM control of a system

3. PACKAGE CONTENTS

Transmitter

1×HDMI/DP over Fiber (10GbE) Transmitter

1×12V/3A DC Power Adaptor

1×Power Cord

1×Operation Manual

Receiver

1×HDMI/DP over Fiber (10GbE) Receiver

1×12V/3A DC Power Adaptor

1×Power Cord

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI or DisplayPort source equipment such as a media player, video

game console, PC or set-top boxes.

HDMI receiving equipment such as HDTVs, monitors or audio

amplifiers.

Analogue audio receiving equipment such as headphones, audio

amplifiers or powered speakers.

A 10 Gigabit fiber Ethernet network switch with jumbo frame and

IGMP snooping support is required for distributed video systems.

5. FEATURES

HDMI 2.0 and DVI 1.0 compatible

HDCP 2.2 and HDCP 1.x compliant

Ultra-light compression, lossless for most content

Extension up to 30km (depending on the fiber module used)

Supports pass-through of 10/12-bit HDR sources (Point-to-Point and

Genlock mode only)

Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,

Bitstream and HD Bitstream from HDMI or DisplayPort sources

Analogue stereo audio extension, insertion and extraction (insertion

and extraction requires optional control center/software)

Bi-directional RS-232, IR, & USB 2.0 extension

Data Transmission interfaces with 10 gigabit Ethernet via XFI, IEEE

802.3ae, compatible SFP+ fiber modules

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front Panel

POWER GbE VIDEO TX

LINK

RX USB VIDEO SWITCH

SDV-FTX

1 2 3 4 5 6 7 8

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2GbE LED: This LED illuminates and blinks to indicate activity on the

gigabit Ethernet port.

3VIDEO LED: This LED will illuminate when the currently selected input

is live. When no source is detected the LED will remain off.

4LINK LEDs: These LEDs illuminate to indicate the fiber network

connection’s status.

TX: This LED blinks to indicate data transmission activity.

RX: This LED blinks to indicate data reception activity.

5USB LED: This LED will illuminate when the USB port is actively paired

with a Receiver’s USB port.

6BLANK BUTTON: Currently no assigned function.

7VIDEO SWITCH BUTTON: Press this button to switch between the

HDMI and DisplayPort inputs.

Note: Press and hold the Video Switch button for 30 seconds when

powering the unit on to reset the unit to the factory defaults.

8RESET: Press and hold this button for 3 seconds to soft-reboot the

unit.

6.2 Transmitter's Rear Panel

DC 12V

LAN USB

RS232

AUDIO IR OUT IR IN

DP IN

HDMI IN SFP+

21 3 8

456 7

9 10

1DP IN: Connect to DisplayPort source equipment such as a PC or

laptop.

2HDMI IN: Connect to HDMI source equipment such as a media player,

game console or set-top box.

3SFP+: Connect a standard SFP+ module to allow data transmission

over optical fiber to a compatible Receiver.

Note: Single-mode and multi-mode support is dependent on the SFP+

modules used. Simplex SFP+ modules must use different wavelengths for

each end (e.g. 1330/1270nm).

4AUDIO IN: Connect to the stereo analogue output of a device such as

a CD player or PC.

5IR OUT: Connect to the provided IR Blaster to transmit IR signals to

devices within direct line-of-sight of the IR Blaster.

6IR IN: Connect to the provided IR Extender to extend the IR control

range of remotely located devices. Ensure that the remote being used

is within direct line-of-sight of the IR Extender.

7RS232: Reserved for future use.

8LAN: Connect to an Ethernet supporting device or to your local

network as appropriate to extend the network between the

Transmitter and Receiver.

9USB: Connect directly to a PC to extend its USB functionality to the

port on the connected Receiver.

10 DC 12V: Plug the 12V DC power adapter into this port and connect it

to an AC wall outlet for power.

Altri manuali per SDV-FTX

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente