CYP CMSI-46PL Manuale utente

CMSI-46PL

4 by 6 Matrix

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 October 2013

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 25/03/14 Preliminary Release

VR1 07/07/14 RS-232 Description

CONTENTS

1. Introduction...............................................................1

2. Applications..............................................................1

3. Package Contents ...................................................1

4. System Requirements...............................................2

5. Features.....................................................................2

6. Operation Controls and Functions..........................3

6.1 Front Panel ...........................................................3

6.2 Rear Panel............................................................4

6.3 Side Panel ............................................................5

6.4 Remote Control...................................................5

6.5 IR Pin Assignment ................................................6

6.6 RS-232 Protocols ..................................................6

6.7 RS-232 & Telnet Commands...............................7

6.8 RS-232 UART Command Illustration Diagram.10

6.9 Telnet Control ....................................................11

6.10 Web GUI Control .............................................13

7. Connection Diagram .............................................15

8. Specications .........................................................16

9. Acronyms ................................................................17

1. INTRODUCTION

The 4 by 6 Matrix allows HDMI signal from any of its four sources to be

routed to any of its six outputs simultaneously. With a thoughtful design

for local and remote connections both required in system integration,

the model is engineered with 2 HDMI and 4 CAT5e/6/7 outputs, the

later ones carry major HDBaseT features including the transmission

of high denition audio and video, bidirectional IR, RS-232 and PoC

(Power over Cable) over 60 meters. The remote control, RS-232, Telnet

and IP Control, with all information including system status presented

on its LCM display.

2. APPLICATIONS

• HDMI system controls

• Video/TV wall display and control

• Security surveillance and control

• Commercial advertising, displaying and control

• Lecture room display and control

• Hyper market demonstration and control

3. PACKAGE CONTENTS

• 1 x 4 by 6 Matrix

• HDMI over CAT5e/6/7 Receivers (Optional)

• 1 x IR Extender

• 1 x IR Blaster

• 1 x L&R Rack Ears

• 1 x 24V/3.75A DC Power Supply

• 1 x Power Cord

• 1 x Remote Control (with battery)

• 1 x Operation Manual

4. SYSTEM REQUIREMENTS

• Input source equipment with HDMI connection cables

• Industry CAT5e/6/7 cable

• HDMI over CAT5e/6/7 Receivers with industrial CAT5e/6/7 cables

• Output displays or audio receiver equipments with HDMI

connection cables

5. FEATURES

• Supports resolutions VGA to WUXGA and 480i to 1080p dependent

upon the output display’s EDID settings

• Supports distances up to 70 meters through CAT6/7 cables and

60m for CAT5e

• Supports 3D signal display dependent upon the output display’s

EDID settings

• Supports bidirectional IR from input and output locations

• Supports external and internal EDID settings

• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio Transmission

• Supports PoC (Power over Cable) on compatible receiver only

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CMSI-46PL

4X6 HDMI MATRIX

POWER LOCK MENU

OUT

A1C3

D4IN

1 2 3 4 5 6

1LCM: This monitor displays your setting information with each input

and output selection.

2IR: This IR window accepts the remote control signal of this device

only.

3Power Button & LED: Press this button to turn ON the device and the

orange LED will illuminate when the power is ON. When the LED

illuminate in red it is in standby mode.

4LCOK: Press this button to lock all the buttons on the panel and the

LED will illuminate. To unlock, just press it again.

5Menu: Press this button once to select EDID setting from

STD(internal) 1 or TV(external) 2 then press it again to conrm the

selection. Press this button every time to conrm the selection.

61~4/A~F & OUT/IN button: Press OUT/IN button rst to select the

output/input then press the number button to make the selection

accordingly. For example, output A~B wish to select input 1 and

C~E wish to select input 2. Press OUT →A→B→IN →1→Menu,

and then press Out →C→D→E→IN →2→Menu. If the menu

button is not pressed the selection will not be changed.

6.2 Rear Panel

SERVICE

RS-232

CONTROL

B CA E FD

DC 24V

GND

GND GND

IR OUT

IR IN

ALL

V+

IR IN IR OUT

HDMI IN 1 HDMI IN 2 HDMI IN 3 HDMI IN 4

HDMI OUT CAT5e/6/7 OUT CAT5e/6/7 OUT

2 3 4 45 5 5 10 115 6

8 9

1RS-232: This slot is to connect with D-Sub 9-pin cable from the PC/

Laptop device for RS232 control.

Note: This RS-232 obtain routable function that is, from the Matrix it

can send commands to all Receivers or from Receiver sides it can

also send commands to control the Matrix. In order to allow the

Receivers to send command to control the Matrix, a null modern

cable/adaptor is required.

2CONTROL: This port is for Telnet and Web GUI control. Connect to

an active network system with RJ45 terminated cable (for details,

please refers to section 6.7 & 6.8).

3Service: This slot is to connect with mini USB B type cable for

rmware update only.

4HDMI OUT A/D: These slots are to connect with HD TV/display for

instant display.

5CAT5e/6/7 OUT B/C/E/F: These slots are to connect with HDMI over

CAT5e/6/7 Receiver for signal extension up to 60m.

6HDMI IN 1~4: These slots are to connect to input source equipment

such as DVD player or Set-Top-Box with HDMI cable or DVI to HDMI

converter cable for input signal sending.

7IR IN 1~4: These slots are to connect with IR Extender included in

the package for IR signal receiving. Ensure that remote being used

is within the direct line-of-sight of the IR Extender.

8IR OUT 1~4: These slots are to connect with IR Blaster included in

the package for IR signal sending. Place the IR Blaster in direct

lineof-sight of the IR Extender.

9ALL IR OUT: This slot is to connect with the IR Blaster for IR signal

received from Receiver sides and send to the source side. Place

the IR Blaster in direct line-of-sight of the IR Extender.

10 ALL IR IN: This slot is to connect with the IR Extender for IR signal

receiving and send out to Receiver sides. Ensure that remote being

used is within the direct line-of-sight of the IR Extender.

11 DC24V: This slot is to plug the power cord with adaptor included

in the package and then connect them with AC wall outlet for

power supply.

6.3 Side Panel

1Ventilator: These are fan ventilator area, DO NOT block these area

or cover it with any object.

6.4 Remote Control

1Power: Press this button to

switch ON the device or set it

to standby mode.

2IN: Input ports selection 1~4.

3OUT: Output ports selection

A~F.

CR-110

IN OUT

6.5 IR Pin Assignment

Power

IR Blaster Signal

IR Signal

Power

Grounding

IR Extender

IR Blaster

6.6 RS-232 Protocols

CMSI-46PL Remote Control Console

PIN Assignment PIN Assignment

1 NC 1 NC

2Tx 2Rx

3Rx 3Tx

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 19200bps

Data bit: 8 bits

Parity: None

Flow Control: None

Stop Bit: 1

Indice

Altri manuali CYP Commutatore a matrice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente