CYP PU-515PLRX-2HCD Manuale utente

PU-515PLRX-2HCD

HDBaseT™ LITE Receiver with dual HDMI output, Audio

De-embedding, PoC, RS-232 & 2-way IR (up to 60m)

OPERATION MANUAL

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufﬁ cient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 23/10/14 Preliminary Release

RDV2 31/10/14 Add YUV_420

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 IR Cable Pin Assignments ................4

6.4 D-Sub 9 Pin Deﬁ nition.......................5

7. Connection Diagram ............................ 6

8. Speciﬁ cations ........................................ 7

9. Acronyms ............................................... 8

1. INTRODUCTION

The PU-515PLRX-2HCD Receiver allows uncompressed HDMI signals to

be transmitted over a Single CAT5e/6/7 cable. This device allows the

distribution of Video, Audio, Power over Cable (PoC), RS-232 and 2-

way IR control functionality over the same CAT5e/6/7 cable. These

combined HDMI and control signals can be transmitted up to lengths

of 60 metres. This variant of the PU-515-RX Receiver provides dual

HDMI outputs for added flexibility enabling distribution to 2 displays

within a zone and also provides both digital and analogue audio

outputs for local amplification.

2. APPLICATIONS

•Extending incoming signal from CAT5e/6/7 to HDMI outputs

•Extending incoming signal from CAT5e/6/7 to both analog and

digital audio outputs

• Lecture room/Showroom/Meeting room/Classroom display and

control

3. PACKAGE CONTENTS

•1 x HDMI Splitter with Audio over Single CAT5e/6/7 Receiver

•1 x IR Receiver

• Operation Manual

4. SYSTEM REQUIREMENTS

HDBaseT compatible Transmitter input and output display with HDMI

input jack.

5. FEATURES

Note:

1. The PoC function is designed for powering compatible Transmitter

units only—non-PoC Transmitter will need their own power supply.

Transmitters of another brand may not be compatible.

• HDCP 2.2 Compliant

• HDMI, HDCP, & DVI compliant

• Supports uncompressed video/audio up to 10.2Gbps

• Supports resolutions VGA~WUXGA, 480i~1080p, 4K

UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV

4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz

(YUV 4:2:0) dependent upon the output display’s EDID settings

• Receive uncompressed data over a single 60 m/328 ft CAT5e/6/7

cable

• Convergence: Video, Audio, PoC & Control (bi-directional IR &

RS-232 bypass)

• Provided with 24V DC power or powered from compatible PoC

Transmitter through CAT5e/6/7

• Supports Balanced analog audio output (R/L)

• Support coaxial digital audio up to 192kHz

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

DC 24V CAT5e/6/7 IN IR 2

OUT

USB

IR 1

1 2 3 4 5 6

1Power LED: This LED will illuminate when the device is connected to

a power supply.

2DC 24V: Plug the 24 V DC power supply into the unit and connect

the adaptor to an AC outlet. Only one side of power is needed to

activate both Transmitter and Receiver when both obtain the PoC

function.

4CAT5e/6/7 IN: Connect from the Transmitter unit with a Single

CAT5e/6 cable for receiving all data signals.

5IR IN: Connect to the supplied IR Receiver cables for IR signal

reception. Ensure that remote being used is within the direct line-

of-sight of the IR Extender.

6IR OUT: Connect to the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

7USB: This port is reserved for ﬁ rmware update only.

6.2 Rear Panel

COAXIAL

OUT

RS-232

OUT

HDMI OUT 1 HDMI OUT 2

1 2 3 3 4

1Balanced Analog R/L OUT: Connect to an ampliﬁ er or active

speaker with 3.5mm terminal block jack for audio output.

2COAXIAL OUT: Connect to an ampliﬁ er or active speaker with

coaxial cable for audio output.

3HDMI OUT 1/2: These slots are to connect with HDMI TV/Monitor for

output image display.

4RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from

device equipment for receiving RS-232 commands.

6.3 IR Cable Pin Assignments

Power

IR Blaster Signal

IR Signal

Power

Grounding

IR Receiver

IR Blaster

6.4 D-Sub 9 Pin Deﬁ nition

Pin Deﬁ ne TX/RX

1N/C

2TxD / RxD

3RxD / TxD

4N/C

5GND

6N/C

7N/C

8N/C

9N/C

7. CONNECTION DIAGRAM

1.5m

60°

3m 3m

60°

POWER

DC 24V CAT5e/6/7 IN IR 2

OUT

USB

IR 1

COAXIAL

OUT

RS-232

OUT

HDMI OUT 1HDMI OUT 2

CAT5e/6 In

Link

IR1 Extender

IR2 Blaster

Power

DVD or Blu-ray Player

Compatible

Transmitter

Smart TV or

Game Console

Digital Audio

Output (Optical)

RS-232 Equipped

PC or Notebook

8. SPECIFICATIONS

Video Bandwidth 340MHz / 10.2Gbps

Input Ports 1x CAT5e/6/7, 1 x IR Extender

Output Ports 2 x HDMI, 1 x Coaxial,

1 x Balanced Analog (R/L),

1×IR Blaster, 1 x RS-232

CAT5e/6/7 Output Cable

Distance

Up to 60 Meters

HMDI Input/Output

Cable Distance

Up to 10 Meters@1080p or 5Meters@4K2K

HDMI output Resolution Up to 4K2K@24/25/30 & 50/60 YUV_420

Audio Sampling Rate Up to 96 kHz / Balanced Analog

Up to 192 kHz / Coaxial & HDMI

IR Frequency 30~50 kHz

ESD Protection Human body model:

±8kV (air-gap discharge)

±6kV (contact discharge)

Dimensions (mm) 145 (W) x 115 (D) x 30(H)/Jack Excluded

145 (W) x 128 (D) x 30(H)/Jack Included

Weight (g) 394

Chassis Material Aluminum

Silkscreen Color Black

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90% RH (non-condensing)

Power Consumption 12w

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente