CYP CRS-232 Manuale utente

Indice

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente

CRS-232

Transmitter and

CAT5 / RS-232 Receiver

Extender Box

Operation Manual

CRS-232

Revision History

Version No Date Summary of Change

V1 20090218 Preliminary Release

Precautions

Failure to follow the precautions described below may cause damage to

CRS-232 Extender Box and void the warranty.

 DO NOT open the case. Doing so will void the warranty. If you ﬁnd

problem with it, please return back to your retailer or seller who will

assist you or provide you with solution.

 DO NOT use third-Party AC adapter or power cord. Doing so may

damage CRS-232 Extender Box.

 DO NOT bump, jar or drop contents of the products as it may

damage it and result in warranty void.

 DO NOT set any liquids or beverages on the drive as they may

damage CRS-232 Extender Box.

Table of Contents

1

1

1

1

2

2

2

3

3

4

1. Introduction …………………………………………................................

2. Applications..........................……………………………………………

3. Package Contents.............……………………………………………….

4. System Requirements.............…………...............……………………..

5. Features .............................………………………………………………..

6. Operation Controls and Functions..............………………….………..

6.1 TX Front Panel & TX Rear Panel................................................…

6.2 RX Front Panel & RX Rear Panel........................................………

7. Connection and Installation..............................................................

8. Specications......................................................................................

1. Introduction

The CAT 5 RS-232 extender is an affordable, hardware-based solution for

giving you control of any RS-232 protocol device. With regular RS-232 devices

you are limited to an immediate area of control. The CAT5 RS-232 extender

extends control to over 250 meters and gives you a tremendous amount of

flexibility in how and where you control your devices. The RS-232 extender

also provides full duplex transmission and hardware handshake signals, with

the need for any complicated set-up procedures.

2. Applications

• System installation.

• Control RS-232 devices from far away.

• System upgrading.

3. Package Contents

• CRS-232 Transmitter.

• CRS-232 Receiver.

• 5V DC power adaptor.

• Operation Manual.

4. System Requirements

• Input PC/laptop equipment, DB 9 female to male cable x 2, CAT 5 cable

and output source device.

5. Features

• Extends any compatible RS232 device up to 250 meters from the source

to the display.

• Only One CAT 5 cable.

• Perfect for digital signage.

• Simple and easy installation.

• Has a Baud Rate of: 110~921600.

• Data bit: 8bit.

1

6. Operation Controls and Functions

6.1 TX Front Panel TX Rear Panel

①

RS-232 IN

② ③

CAT5

DC 5V

q Connect a PC/laptop‘s main control system with a DB 9 female to male

cable in order to send protocol to the source device.

② Connect a CAT 5 cable up to 250M away and link it to the Receiver.

③ Connect the 5V DC power adaptor into the unit and plug the adaptor

into an AC outlet.

Note: Only one adaptor is needed for both the Transmitter and Receiver.

6.2 RX Front Panel RX Rear Panel

①

CAT5

DC 5V

② ③

RS-232 OUT

① Connect the CAT 5 cable from the Transmitter into the Receivers CAT 5

slot.

② Connect the 5V DC power adaptor.

Note: Only one adaptor is needed for both Transmitter and Receiver

however, if operating at extreme distances or if no image is

displayed then two adaptors will be required.

③ Connect to the source device with a DB 9 male to female cable for

receiving and communicating with a PC/Laptop.

2

7. Connection and Installation

PC

or

TV

External Box

or

ReceiverTransmitter

CAT5

Modem

Cable

Modem Cable

Modem Cable

Null

Modem

Cable

PC

3

8. Specication

Input Port RS232 D-Sub-9 female

CAT 5

Output Port RS232 D-Sub-9 male

CAT 5

Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified)

Dimensions (mm) 50(W) x 67(H) x 23(D) / each

Weight (g) 80 / each

Chassis Material Aluminum

Silkscreen Color Silver

Operating Temperature 0˚C~40˚C

Power Consumption 0.5W(Max)

4

20090219 MPM-CRS232TXRX

Home page: http://www.cypress.com.tw

CYPRESS TECHNOLOGY CO., LTD.