CYP CH-1529RXV Manuale utente

CH-1529RXV

4K UHD+HDMI over HDBaseT Receiver

with HDR & OAR

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 02/05/18 Preliminary release

VS1 10/05/18 Final technical review

VS2 21/05/18 Updated section 6.1 & 6.5

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................2

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 IR Cable Pinouts ........................................ 5

6.4 RS-232 Control ........................................... 5

6.5 RS-232 Commands.................................... 6

7. Connection Diagram ......................................7

8. Specications ..................................................8

8.1 Technical Specications .......................... 8

8.2 Video Specications................................. 9

8.3 Audio Specications............................... 10

8.4 Cable Specications .............................. 11

8.5 HDBaseT Features.................................... 11

9. Acronyms .......................................................12

1. INTRODUCTION

This HDMI over single Cat.5e/6/7 Receiver is a great solution for

extending HD audio and video as well as Ethernet and control via

a single run of Cat.5e/6/7 cable over distances of up to 100 meters.

Multiple data and control interfaces are provided, including IR,

RS-232 and LAN connections. This Receiver complies with the

advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting

the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s

10.Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and

including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR,

are able to be processed and extended by the use of AVLC (Adaptive

Visually Lossless Compression) when connected to a compatible

AVLC Transmitter.

Beyond video, data, and control this unit also contains useful audio

features. The Optical Audio Return (OAR) feature supports transmitting

optical audio back to a compatible Transmitter for local playback.

Rounding out the feature set is automatic TMDS re-clocking support.

This Receiver (PD) is powered by 48V PoH (Power over HDBaseT) from

a compatible Transmitter (PSE), allowing for exibility within different

installation scenarios.

2. APPLICATIONS

• 48V PoH from Transmitter (PSE) to Receiver (PD)

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI over HDBaseT Receiver with HDR & OAR

• 1×3.5mm to IR Extender Cable

• 1×Rackmount Ears (Set of 2)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

• A compatible HDBaseT Transmitter (PSE) with 48V PoH support is

required.

• The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly

recommended.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES

• HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

• HDCP 2.2 and HDCP 1.x compliant

• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

• Supports CEC bypass

• Simultaneous reception of uncompressed video, audio and data

over a single Cat.5e/6/7 cable up to 100m/328ft at 1080p60 and

70m/230ft at 4K

• HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

48V PoH, and Control (bidirectional IR/RS-232 pass-through)

• Support for compatible AVLC (Adaptive Visually Lossless

Compression) Transmitters, allowing for the output of HDMI sources

that were originally beyond 10.2Gbps (340MHz) and up to 18Gbps

(600MHz) with no loss of visual quality

• Supports the Optical Audio Return (OAR) function to transmit optical

audio from the Receiver to a compatible Transmitter

• Performs TMDS re-clocking and signal re-generation for improved

signal integrity

• Ultra-thin wall plate design (16mm thickness) for convenient

installation

• Powered by standard 48V PoH from Transmitter (PSE) to Receiver

(PD) (compatible Transmitters only)

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CONSOLE/

BYPASS

RS-232SERVICE

OPT. IN

LINK

POWER

IR BLASTER 1IR EXTENDER 2

1 2 3 4 5 6 7

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Transmitter is active.

2OPT. IN: Connect to the optical audio output of a device such

as a media player or game console using an appropriate optical

cable. Audio is sent to the Optical Audio Return output on a

connected compatible Transmitter.

3IR EXTENDER 2: Connect to an IR Extender to extend the IR control

range of devices connected to the other end of the HDBaseT

connection. Ensure that the remote being used is within direct line-

of-sight of the IR Extender.

4IR BLASTER 1: Connect to the provided IR Blaster to transmit IR

signals from the other end of the HDBaseT connection to devices

within direct line-of-sight of the IR Blaster.

5SERVICE: This USB port is reserved for rmware update.

6RS-232: Connect to a PC, laptop or other serial control device

with a 3-pin adapter cable for the extension of RS-232 signals to

the Transmitter in "Bypass" mode, or for control this unit when in

"Console" mode.

Note: Depending on the controlled device connected to the

Transmitter side, the Tx and Rx pins might need to be reversed.

7CONSOLE/BYPASS: This switch controls the operational mode of the

RS-232 port. When set to “Bypass”, RS-232 signals will be passed to

the connected Transmitter. When set to “Console” the RS-232 port

may be used to send commands directly to the Receiver.

Note: RS-232 bypass requires both the Transmitter and Receiver to

be set to “Bypass” mode.

6.2 Rear Panel

CAT5e/6/7 IN HQ

STD

HDMI OUT LAN

1 32 4

1LAN: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of

the HDBaseT connection.

2HQ & STD LEDs: These LEDs illuminate to indicate which AVLC mode

will be used when AVLC is required. The lower green LED indicates

that AVLC will use HQ (High Quality) mode. The upper yellow LED

indicates that AVLC will use STD (Standard) mode.

3HDMI OUT: Connect to an HDMI TV, monitor or amplier for digital

video and audio output.

4CAT5e/6/7 IN: Connect to a compatible, 48V PoH supplying,

HDBaseT Transmitter with a single Cat.5e/6/7 cable for transmission

of all data signals as well as to power the unit.

6.3 IR Cable Pinouts

Infrared

Power

Ground

IR Extender

IR Blaster Power

Infrared

6.4 RS-232 Control

Terminal Block Controlling PC Serial Port Settings

Pin Denition Pin Denition Baud Rate 19200

1 GND 1 Data Bits 8

2Rx 2Rx Parity Bit None

3Tx 3Tx Stop Bits 1

4Flow Control None

5 GND

Indice

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente