CYP CPLUS-21FRX Manuale utente

CPLUS-21FRX

4K UHD+HDMI over Fiber Receiver

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

VS1 21/06/18 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 3

6.3 WebGUI Control ........................................ 4

6.4 RS-232 Control ......................................... 11

6.5 Telnet Control .......................................... 11

6.6 RS-232 and Telnet Commands .............. 12

7. Connection Diagram ....................................17

7.1 Conguration 1........................................ 17

7.2 Conguration 2........................................ 18

8. Specications ................................................19

8.1 Technical Specications ........................ 19

8.2 Video Specications............................... 20

8.3 Cable Specications .............................. 21

9. Acronyms .......................................................21

1. INTRODUCTION

This HDMI over Fiber Receiver is designed to extend your 4K UHD

HDMI signal using a single segment of multi-mode optical ber

cable. Using ber optical cable provides many advantages over

traditional copper-based extension methods, including immunity to

RF and magnetic interference, thinner and lighter cables, and much

longer extension distances (up to 300 meters per segment). Multiple

ber Transceiver units can be placed between the Transmitter and

Receiver to greatly extend the total extension distance via cascading

(up to 300 additional meters per Transceiver) if the extra distance or

exibility is desired.

The HDMI input and output of this unit supports resolutions up

to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to

1080p@60Hz, HD audio formats and other features dened by the

HDMI 2.0 specication. The ber input of this unit supports sources

with bandwidth up to 10.2Gbps (4K@30Hz or 4K@60Hz, YUV 4:2:0).

Six pre-dened internal EDIDs, one external EDID selection and two

User uploaded EDIDs are available for EDID management. The unit

provides intuitive front panel controls as well as RS-232, Telnet and

WebGUI control options.

2. APPLICATIONS

• Entertainment Rooms & Home Theaters

• Showrooms & Demo Rooms

• Lecture Hall Presentations

• Public Commercial Displays

3. PACKAGE CONTENTS

• 1×HDMI over Fiber Receiver

• 1×5V/2.6A DC Power Adapter

• 1×3.5mm to 9-pin D-sub Adapter Cable

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as a media player, video game

console or set-top box.

• HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

• Use of the optical ber input requires a compatible ber Transmitter

or Transceiver and appropriate paired LC multi-mode ber in a

crossover conguration.

5. FEATURES

• HDMI with 3D & 4K@60Hz with HDR support

• DVI 1.0 compliant with the use of an HDMI-DVI adaptor

• HDCP 2.2 and 1.x compliant

• 1 HDMI (18Gbps) input

• 1 Fiber (10.2Gbps, LC pair, multimode) input

• 1 HDMI (18Gbps) output

• Supports UHD resolutions up to 4K@60Hz (4:4:4, 8-bit)

• Supports 16-bit Deep Color up to 1080p@60Hz

• Supports pass-through of audio formats: LPCM 2.0/5.1/7.1, Bitstream,

and HD Bitstream

• Comprehensive EDID management support including 6 pre-dened

internal EDIDs, 1 external EDID, and 2 User uploaded EDIDs

• Compatible with the 3×2 HDMI and Fiber Matrix Transceiver

(optional)

• Fiber transmission distances of up to 300 meters

• Supports control via front panel, WebGUI, Telnet, and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE POWE

4K UHD+ HDMI / FIBER

RECEIVER

321

1SERVICE: This slot is reserved for rmware update use only.

2POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

3IN Button & LEDs: Press this button to sequentially switch through

both inputs and mute. The LED will illuminate solid to indicate

which source is currently selected. When both LEDs are blinking,

the output is muted.

6.2 Rear Panel

DC 5VRS-232

CONTROL

FIBER 2

HDMI 1HDMI OUT

4 5

1HDMI OUT: Connect to an HDMI TV, monitor or amplier for digital

video and audio output.

2HDMI 1 & FIBER 2 IN: Connect to HDMI source equipment such

as a media player, game console or set-top box. Connect the

ber (paired LC) input to the ber output from a compatible ber

Transmitter or Transceiver unit.

3CONTROL: Connect directly, or through a network switch, to your

PC/laptop to control the unit via Telnet/WebGUI.

4RS-232: Connect, via the provided 9-pin adapter cable, to a PC,

laptop or other serial control device to send RS-232 commands to

control the unit.

5DC 5V: Plug the 5V DC power adapter into the unit and connect it

to an AC wall outlet for power.

6.3 WebGUI Control

• Device Discovery APP

Please obtain the “Device Discovery” software from your authorized

dealer and save it in a directory where you can easily nd it.

Connect the unit and your PC/Laptop to the same active network

and execute the “Device Discovery” software. Click on “Find Devices

on Network” and a list of devices connected to the local network will

show up indicating their current IP address.

Note: The unit’s default IP address is 192.168.1.50.

By clicking on one of the listed devices you will be presented with the

network details of that particular device.

1) IP Mode: If you choose, you can alter the static IP network settings

for the device, or switch the unit into DHCP mode to automatically

obtain proper network settings from a local DHCP server. To switch

to DHCP mode, please select DHCP from the IP mode drop-down,

then click “Save” followed by “Reboot”.

2) WebGUI Hotkey: Once you are satised with the network settings,

you may use them to connect via Telnet or WebGUI. The network

information window provides a convenient link to launch the

WebGUI directly.

• WebGUI Control Page

After connecting to the WebGUI’s address in a web browser, the

password then click “Submit” to log in.

Note: The default user name and password is “admin”.

On the left side of the browser you will see the following menu tabs

where all primary functions of the unit (Video, EDID Settings and

System Settings) are controllable via the built in WebGUI. The individual

functions will be introduced in the following sections.

Clicking the red “Logout” tab will automatically log the currently

connected user out of the WebGUI and return to login page.

Indice

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente