CYP CH-507RXWP Manuale utente

CH-507RXWP

HDMI over Single CAT5e/6/7 Wall-plate Receiver

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 14/02/12 Preliminary Release

RDV2 20/01/15 Updated Text & Diagrams

RDV3 25/07/19 Update Format and Cable

Distance

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Receiver Front Panel........................3

6.2 Receiver Rear Panel ........................4

6.3 IR Cable Pin Assignment..................4

6.4 D-sub 9-pin Cable Denitions .........5

7. Connection Diagram ............................ 6

Option 1: Point to Point..........................6

Option 2: Matrix System.........................7

8. Specications ........................................ 8

8.1 Technical Specication...................8

8.2 Cable Specications .......................9

9. Acronyms ............................................. 10

1. INTRODUCTION

The HDMI over Single CAT5e/6/7 Wall-plate Receiver is designed

to receive uncompressed video, audio and IR control data from a

compatible transmitter over a single run of CAT5e/6/7 cable at a

distance of up to 100 meters at 1080p or 70 meters at 4K. It has the

added benet of control through the built-in RS-232 and IR ports and a

bi-directional LAN serving connection. Additionally, it can be powered

by a compatible transmitter unit via the Power over Cable (PoC)

functionality allowing for greater exibility in installations.

2. APPLICATIONS

• Extend an HDMI signal to a remote location

• Household entertainment sharing and control

• Showroom display and control

• Classroom display and control

3. PACKAGE CONTENTS

• 1×HDMI over Single CAT5e/6/7 Wall-plate Receiver

• 1×IR Extender

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI equipped source device (connected with HDMI cables) or

DVI equipped source (connected with DVI to HDMI cables)

• HDMI equipped display (TV or monitor) or an HDMI equipped AV

receiver, connected with HDMI cables

• Industry standard CAT5e/6/7 cable

• Compatible PoC HDBaseT™ Receiver

5. FEATURES

• HDMI 1.x and DVI 1.0 compliant

• HDCP compliant

• Supports HDMI 3D and 4K x 2K features

• Supports HDCP repeater and CEC bypass

• Supports distance up to 100m/328ft at 1080p and 70m/229ft at 4K

through CAT5e/6/7 cable

• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz

( YUV 4:4:4, 8-bit)

• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,

and Bitstream over HDMI

• HDBaseT™ 5PlayT™ convergence: uncompressed high denition Video

and Audio, LAN serving, Power over Cable (PoC) and RS-232/IR control

• Easy to install wall plate design

Note:

1. This system was tested with CAT6/23AWG and CAT5e/24AWG

cables, results may vary with cables of a different specication.

2. The PoC function requires a compatible Transmitter unit.

Transmitters from other brands may not be compatible.

3. For playback of 4K2K HDMI source signals, a 4K2K capable display

and High Speed HDMI cables are required.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Receiver Front Panel

HDMI OUTLAN

POWER

LINK

IR 1

EXTENDER

IR 2

BLASTER

RS-232

OUT

1 2 3 4 5 6 7

IR 1 EXTENDER: Connect an IR Extender cable for IR signal

reception. Signals received will be transmitted from any IR blaster

connected to the transmitter unit. Ensure that the remote being

used is within the direct line-of-sight of the IR Extender.

IR 2 BLASTER: Connect an IR Blaster cable for IR signal transmission.

IR signals received by an IR extender connected to the transmitter

unit will be transmitted by this blaster. Place the IR Blaster in direct

line-of-sight of the equipment to be controlled.

RS-232 OUT: Connect to the device that is to be controlled (via

D-sub 9-pin female cable) by RS-232 commands.

LAN: Connect to an active network for LAN serving. When the

transmitter or any compatible LAN equipped receivers are

connected to a network, this allows the network access (including

internet access if available) to be shared between the receiver

and all connected receivers. Connect any Ethernet equipped

device e.g. a Smart TV or games console to the LAN port of a

receiver for that device to share the network/internet access.

HDMI OUT: Connect to a HDMI equipped TV/monitor for display of

the HDMI input source signal.

POWER LED: This LED will illuminate when the device is connected

to a power supply or powered by another unit via PoC.

LINK LED: This LED will illuminate when both the source connected

to the transmitter and the display connected to the receiver are

connected.

6.2 Receiver Rear Panel

CAT5e/6/7 IN: Connect to the transmitter unit with a single

CAT5e/6/7 cable for transmission of all data signals.

6.3 IR Cable Pin Assignment

1Power

IR Blaster Signal

IR Signal

Power

Ground

IR Extender

IR Blaster

6.4 D-sub 9-pin Cable Denitions

PIN DEFINITION

1N/C

2TxD/RxD

3RxD/TxD

4N/C

5GND

6N/C

7N/C

8N/C

9N/C

Altri manuali per CH-507RXWP

Indice

Altri manuali CYP Ricevitore

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente