CYP CH-1604TXD Manuale utente

CH-1604TXD & CH-1604RXD

4K UHD+HDMI over HDBaseT Transmitter & Receiver

with HDR/USB

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

REVISION HISTORY

REVISION DATE SUMMARY OF CHANGE

VS0 25/06/18 Initial technical review

VS1 08/08/18 Updated Section 6.1, 6.3 (USB ports)

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................2

4. System Requirements......................................2

5. Features............................................................3

6. Operation Controls and Functions.................4

6.1 Transmitter's Front Panel ........................... 4

6.2 Transmitter's Rear Panel............................ 5

6.3 Receiver's Front Panel............................... 6

6.4 Receiver's Rear Panel ............................... 7

6.5 IR Cable Pinouts ........................................ 9

6.6 RS-232 Protocol.......................................... 9

7. Connection Diagram ....................................10

8. Specications ................................................11

8.1 Transmitter's Technical Specications... 11

8.2 Receiver's Technical Specications...... 12

8.3 Video Specications............................... 13

8.4 Audio Specications............................... 14

8.5 Cable Specications .............................. 15

9. Acronyms .......................................................16

1. INTRODUCTION

This HDBaseT 2.0 Transmitter and Receiver set provides for the

extension of 4K video with HDR and high bitrate audio over a single

Cat.6a/7 cable at distances of up to 100 meters (328 feet). This

extender set complies with the advanced HDCP 2.2 and HDMI 2.0

standards, as well as supporting the legacy HDCP 1.x and HDMI

1.x standards. Through the use of the highly efcient, and visually

lossless, DSC compression scheme, high bandwidth signals, previously

unsupported by HDBaseT, such as 4K@60Hz (4:4:4, 8-bit) or 4K@24Hz

(4:4:4, 12-bit, HDR) can be extended without visual compromise or

additional latency! These extenders can also pass RS-232, IR, Ethernet,

and multiple audio streams across the same cable that carries the

video signal.

This system also allows for the extension of USB signals between any

standard USB host (such as a PC or laptop) on one side to up to

2 USB ports on the other side. This both extends the USB port while

simultaneously providing USB hub functionality making this an ideal

KVM solution when the PC is housed in a distant control room, or

secure server room. The 48V PoH (Power over HDBaseT) design can

power the Receiver (PD) from the Transmitter (PSE), eliminating the

need for a separate power supply for the Receiver.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

Transmitter

• 1×HDMI over HDBaseT Transmitter with HDR/USB

• 1×24V/2.7A DC Power Adapter

• 1×Power Cord

• 1×3.5mm to IR Blaster Cable

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

Receiver

• 1×HDMI over HDBaseT Receiver with HDR/USB

• 1×3.5mm to IR Extender Cable

• 1×Shockproof Feet (Set of 4)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as a media player, video game

console or set-top box.

• HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

• The use of “Premium High Speed HDMI” cables, and industry

standard Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

• HDMI input and output with 18Gbps (600MHz) 4K UHD with HDR

support

• DVI 1.0 compliant with the use of an HDMI-DVI adapter

• HDCP 1.4 and 2.2 compliant

• Supports the HDBaseT 2.0 specication

• Supports HD resolutions up to 3840×2160@60Hz (YUV 4:4:4, 8-bit)

• Supports 4K HDR at 24Hz (YUV 4:4:4) and 60Hz (YUV 4:2:0) with up to

12- bit color

• Supports 16-bit Deep Color up to 1080p@60Hz

• Simultaneous transmission of video, audio and data over a single

Cat.6/7 cable up to 100 meters (328 feet)

• HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

USB 2.0, 48V PoH and Control (Bi-directional IR/RS-232 pass-through)

• RS-232 baud rates from 110bps to 115200bps are supported

• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,

Bitstream, and HD Bitstream via HDMI

• Supports bi-directional pass-through of digital optical audio formats

including LPCM 2.0 at audio sampling rates up to 48kHz, and

Bitstream via Optical (S/PDIF) connections

• Supports pass-through of analog stereo audio from the Transmitter

to the Receiver via stereo RCA connections

• 2 USB Type A ports and 1 USB Mini B (on Transmitter and Receiver)

for extension of USB devices including mice, keyboards, webcams

or digital storage

• Supports standard 48V PoH from Transmitter (PSE) to Receiver (PD)

(compatible Receivers only)

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front Panel

POWER

LINK LR

AUDIO IN

OUT 1 IN 2

OPTICAL

USB

1 2 3 4 5

1POWER & LINK LEDs: The Power LED will illuminate to indicate the

unit is on and receiving power. The Link LED will illuminate solidly

when a live connection with a compatible Receiver is active.

2AUDIO IN: Connect to the stereo analog output of a device such

as a CD player or PC to extend it to the Receiver’s AUDIO OUT L/R

ports.

3OPTICAL OUT 1: Connect to powered speakers or an amplier for

digital audio output using an appropriate optical cable. Audio

is sourced from the Optical Audio Input port on a connected

compatible Receiver.

4OPTICAL IN 2: Connect to the optical audio output of a device

such as a media player or game console using an appropriate

optical cable. Audio is sent to the Optical Audio Output on a

connected compatible Receiver.

5MINI-B USB: Connect to a PC or Laptop to extend the USB data

connection to the Type-A USB ports on a connected compatible

Receiver.

TYPE-A USB: Connect to USB peripheral devices such as keyboard,

mouse, printer, ash drive, etc. for connection to the USB host

device connected to the Mini-B USB port on a connected

compatible Receiver.

Note 1: The direction of USB extension (Transmitter to Receiver,

or Receiver to Transmitter) is automatically determined by which

Mini-B port is connected to a host device (such as a PC or laptop).

Note 2: If the host connection is moved from one side to the other,

the video output will briey blink out while support for the new USB

direction initializes.

Note 3: Only one host connection is supported at a time. USB

functionality will be disabled if host devices are connected to both

sides simultaneously.

6.2 Transmitter's Rear Panel

HDMI IN DC 24V

HDBaseT OUT

LAN 2LAN 1

EXTENDER

BLASTER

BYPASS

CONSOLE

RS-232

1 2 3 4 5 6 7 8

1LAN 1~2: Connect directly, or through a network switch, to your

PC/laptop to control the unit via Telnet/WebGUI and to extend the

network across the HDBaseT connection.

Note: Connect only one Ethernet port from the HDBaseT

Transmitter/Receiver pair to the local network. Connecting multiple

ports to the same local network may result in a feedback loop and

cause the network to fail.

2IR EXTENDER 2: Connect to the provided IR Extender to extend

the IR control range of remotely located devices. Ensure that the

remote being used is within direct line-of-sight of the IR Extender.

3IR BLASTER 1: Connect to the provided IR Blaster to transmit IR

signals to devices within direct line-of-sight of the IR Blaster.

4RS-232: Connect to a PC, laptop or serial controllable device for

the extension of RS-232 signals between both ends of the HDBaseT

connection in "Bypass" mode, or for control this unit when in

"Console" mode.

5CONSOLE/BYPASS: This switch controls the operational mode of the

RS-232 port. When set to “Bypass”, RS-232 signals will be passed to

the connected Receiver. When set to “Console” the RS-232 port

will send commands directly to the Transmitter.

Note: RS-232 bypass requires both the Transmitter and Receiver to

be set to “Bypass” mode. "Console" mode is currently reserved for

factory use only.

6HDBaseT OUT: Connect to a compatible HDBaseT Receiver with

a single Cat.5e/6/7 cable for transmission of all data signals. 48V

PoH will also be supplied when connected to a compatible PD

Receiver.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente