CYP VEX-E4501T Manuale utente

Operation Manual

UHD+HDMI over HDBaseT

Transmitter & Receiver with USB KVM

VEX-E4501T & VEX-E4501R

DISCLAIMERS

The information in this manual has been carefully checked and is believed

to be accurate. Cypress Technology assumes no responsibility for any

infringements of patents or other rights of third parties which may result from

its use.

Cypress Technology assumes no responsibility for any inaccuracies that

may be contained in this document. Cypress also makes no commitment to

update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express written

permission and consent from Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are trademarks of

the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain, moisture

or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings

or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if it

is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to

be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings

in the unit housing that provide ventilation and allow for su󰀩cient space

for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use to

avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

RDV1 2021/06/18 Preliminary release

CONTENTS

1. Introduction...................................................... 1

2. Applications ..................................................... 1

3. Package Contents ........................................... 1

3.1 Single Unit (Transmitter or Receiver) .......... 1

3.2 Dual Unit Set ............................................... 1

4. System Requirements..................................... 2

5. Features............................................................ 2

6. Operation Controls and Functions ................ 3

6.1 Front Panel (Transmitter) ............................ 3

6.2 Rear Panel (Transmitter) ............................. 4

6.3 Front Panel (Receiver) ................................ 5

6.4 Rear Panel (Receiver)................................. 6

6.5 RS-232 Pinout ............................................. 7

6.6 IR Pinout...................................................... 7

6.7 Audio Pinout ................................................ 7

7. Connection Diagram ....................................... 8

8. Specications .................................................. 9

8.1 Technical Specications (Transmitter)......... 9

8.2 Technical Specications (Receiver)........... 10

8.3 Video Specications .................................. 11

8.4 Audio Specications .................................. 13

8.4.1 Digital Audio ..................................... 13

8.4.2 Analog Audio .................................... 13

8.5 Cable Specications.................................. 14

8.6 HDBaseT Features.................................... 15

9. Acronyms ....................................................... 16

1. INTRODUCTION

This 4K UHD+HDMI over HDBaseT transmitter and receiver pair uses

HDBaseT 3.0, the newest generation of HDBaseT technology, and is the

perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz

(4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7 cable over

distances of up to 100 meters. Multiple control and data signals may also be

transmitted along with the audio and video, including bi-directional IR, RS-

232, USB 2.0, and Gigabit Ethernet.

When the transmitter and receiver are used together, 2 micro USB host

connections are available (1 on the transmitter, 1 on the receiver) for

connecting a single USB host (such as a laptop or PC) to devices on up to

4 USB 2.0 (Type-A) ports (2 on the transmitter, 2 on the receiver) forming

a highly exible KVM extension conguration. This transmitter and receiver

pair is ideal for use in any video extension scenario, but they excel when

latency-free, uncompressed, high resolution video is critical, such as medical

installations, live conferences, and education.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture hall/classroom display and control

• Meeting room presentation and control

3. PACKAGE CONTENTS

3.1 Single Unit (Transmitter or Receiver)

• 1× UHD+HDMI over HDBaseT Transmitter or Receiver with USB KVM

• 1× 24V/2.7A DC Power Adapter (Transmitter only)

• 2× 3-pin Terminal Block

• 1× 8-pin Terminal Block

• 1× Operation Manual

3.2 Dual Unit Set

• 1× UHD+HDMI over HDBaseT Transmitter with USB KVM

• 1× UHD+HDMI over HDBaseT Receiver with USB KVM

• 1× 24V/2.7A DC Power Adapter

• 4× 3-pin Terminal Block

• 2× 8-pin Terminal Block

• 1× Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such a media player, video game console, or

set-top box.

• HDMI receiving equipment such as an HDTV, monitor, or audio amplier.

• The use of Premium High Speed HDMI cables, and industry standard

Cat.6A or Cat.7 Ethernet cable is highly recommended.

5. FEATURES

• HDMI 2.0 and DVI 1.0 compatible

• HDCP 2.2 and HDCP 1.x compliant

• HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)

• 1 HDMI input, 1 HDMI output, and 1 HDBaseT output (Transmitter)

• 1 HDMI input, 1 HDMI output, and 1 HDBaseT input (Receiver)

• Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input and

output over both HDMI and HDBaseT

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

• Supports CEC bypass

• HDBaseT extends video, audio and data over a single Cat.6A/7 cable and

can reach distances up to 100m/328ft

• HDBaseT feature support: HD Video and Audio, Gigabit Ethernet, PoH (Tx

to Rx), Bi-directional audio (analog), and Control (bi-directional USB/IR/

RS-232 pass-through)

• 2 USB 2.0 Type-A device ports and 1 Micro USB host port

• Selectable HDMI audio extraction/analog audio bypass functionality

Note: HDMI audio extraction is only available with LPCM 2.0 sources.

• HDMI output functions as a local monitor (Transmitter only)

• Transmitter can supply PoH to the connected receiver

• Receiver is powered directly via PoH from the connected transmitter

Note: A compatible PSE transmitter providing PoH is required to power

this receiver. Transmitters from other brands may not be compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel (Transmitter)

LAN AUDIO IR

OUT LR R PWRT

AUDIO

BYPASS

EXTRACT LINK

1 3 6 7 108

4 9

1LAN Port: Connect to Ethernet supporting devices or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection.

2AUDIO IN 3-pin Terminal Block: Connect to the analog audio output

of a device such as a media player or game console using a 3-pin

adapter cable. Audio is sent to the analog audio output on the connected

compatible receiver.

3AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or

an amplier for analog audio output using a 3-pin adapter cable. Audio

is sourced from the analog audio input on the connected compatible

receiver.

4RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial

controllable device with a 4-pin adapter cable for the extension of

RS-232 signals between both ends of the HDBaseT connection.

5IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and

Extender using a 4-pin Y-adapter cable to transmit and receive IR control

signals and extend them to devices connected to the other end of the

HDBaseT connection.

6USB 2.0 Ports (Type-A): Connect directly to a standard USB device

such as a mouse, keyboard, or ash drive to extend their USB

functionality to the currently active Micro-USB host port.

7AUDIO Button: Press this button to toggle the transmitter’s analog audio

stream source between the analog audio input (bypass) and the HDMI

input’s audio (extract).

Note: HDMI audio extraction is only available with LPCM 2.0 sources.

Pressing this button will also change the setting on the receiver.

8BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if

the unit is in audio bypass or extract mode.

9POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

10 LINK LED: This LED will illuminate solidly when a live connection with a

compatible receiver is active.

6.2 Rear Panel (Transmitter)

DC24V 2.7A USB HDMI OUTHDMI INCAT6A/7 OUT

1 2 4 53

1DC 24V Port: Plug the 24V DC power adapter into this port and connect

it to an AC wall outlet for power.

2USB 2.0 Port (Micro-B): Connect directly to a standard USB host

such as a PC or laptop to extend their USB functionality to all currently

connected USB devices on both ends of the HDBaseT connection.

Note: If USB hosts are connected to both the transmitter and receiver at

the same time, only the most recently connected host will be active.

3CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a

single Cat.6A/7 cable for extension of all data signals. PoH will also be

supplied to a connected compatible PD receiver.

Note: The PoH function is designed for powering compatible receiver

units only. Non-PoH receivers will need their own power supply.

Receivers from other brands may not be compatible.

4HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box.

5HDMI OUT port: Connect to an HDMI TV, monitor, or amplier for digital

video and audio output.

6.3 Front Panel (Receiver)

LAN AUDIO IR

OUT LR R PWRT

AUDIO

BYPASS

EXTRACT LINK

1 3 6 7 108

4 9

1LAN Port: Connect to Ethernet supporting devices or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection.

2AUDIO IN 3-pin Terminal Block: Connect to the analog audio output

of a device such as a media player or game console using a 3-pin

adapter cable. Audio is sent to the analog audio output on the connected

compatible receiver.

3AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or

an amplier for analog audio output using a 3-pin adapter cable. Audio

is sourced from the analog audio input on the connected compatible

receiver.

4RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial

controllable device with a 4-pin adapter cable for the extension of

RS-232 signals between both ends of the HDBaseT connection.

5IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and

Extender using a 4-pin Y-adapter cable to transmit and receive IR control

signals and extend them to devices connected to the other end of the

HDBaseT connection.

6USB 2.0 Ports (Type-A): Connect directly to a standard USB device

such as a mouse, keyboard, or ash drive to extend their USB

functionality to the currently active Micro-USB host port.

7AUDIO Button: Press this button to toggle the transmitter’s analog audio

stream source between the analog audio input (bypass) and the HDMI

input’s audio (extract).

Note: HDMI audio extraction is only available with LPCM 2.0 sources.

Pressing this button will also change the setting on the transmitter.

8BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if

the unit is in audio bypass or extract mode.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CYP Ricevitore

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente