Daktronics RC-100 Manuale utente

Remote Control System

RC-100

DataMaster Operation Manual

ED-15576 Rev 4 –3 May 2016

201 Daktronics Drive PO Box 5128 Brookings, SD 57006-5128

Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: 605-697-4700

www.daktronics.com/support

ED-15576

Product 1279-99

Rev 4 –3 May 2016

DAKTRONICS, INC.

assumes no responsibility for errors or omissions. No part of this book covered by the copyrights hereon may be

reproduced or copied in any form or by any means –graphic, electronic, or mechanical, including photocopying,

taping, or information storage and retrieval systems –without written permission of the publisher.

All Sport®and DataMaster®are registered trademarks of Daktronics, Inc. All other trademarks used in this manual are the

property of their respective owners.

Table of Contents i

Table of Contents

Section 1: Introduction.................................................................................................................1

1.1 Resources..................................................................................................................................1

1.2 Daktronics Exchange and Repair & Return Programs.......................................................2

Exchange Program ..................................................................................................................2

Before Contacting Daktronics .................................................................................2

Repair & Return Program ......................................................................................................3

Shipping Address .....................................................................................................3

Daktronics Warranty and Limitation of Liability...............................................................3

Section 2: RC-100 System Overview ..........................................................................................5

Section 3: RC-100 Base Station .................................................................................................. 7

3.1 Function Setting ......................................................................................................................7

Selecting Functions .................................................................................................................8

DataTime/DataMaster Display Control Function .............................................................8

3.2 Channel Setting .......................................................................................................................8

3.3 Synchronizing Multiple Base Stations and Channel Selection .........................................9

3.4 Server/Client Mode Setting ................................................................................................10

3.5 Wireless Base Station LEDs .................................................................................................11

LED Error Diagnostics..........................................................................................................12

Section 4: RC-100 Handheld Controller....................................................................................13

4.1 Powering the Controller On and Off..................................................................................13

Using the Keypad..................................................................................................................13

Using External Power...........................................................................................................13

4.2 Battery Operation..................................................................................................................13

Idle Time ................................................................................................................................13

4.3Battery Recharging................................................................................................................13

4.4 Operation Modes ..................................................................................................................14

Config Mode ..........................................................................................................................14

Setting Default Radio Channel Number..............................................................14

Setting LCD Contrast .............................................................................................14

Setting Power Save Mode ......................................................................................15

Connect Mode .......................................................................................................................15

Switching to Connect Mode ..................................................................................15

Signal Strength Indicator .......................................................................................16

4.5 Common Keys .......................................................................................................................16

Alternate Function Keys ......................................................................................................17

Section 5: DataMaster Applications..........................................................................................19

5.1 Selecting DataMaster Applications ....................................................................................19

5.2 DataMaster Application Keys .............................................................................................20

New Code (Alternate Function)..........................................................................................20

Dimming ................................................................................................................................20

Automatic ................................................................................................................21

Manual .....................................................................................................................21

Blank Sign ................................................................................................................21

ii Table of Contents

Display Sequence ..................................................................................................................22

Menu .......................................................................................................................................22

Edit Price Line 1-5 (Gas & Rate Displays Only)..................................................22

Edit Lottery 1-5 (Lottery Displays Only) .............................................................22

LED Test...................................................................................................................23

Display Option (Rate Displays Only) ..................................................................23

Display Option 1-5 (Lottery Displays Only) .......................................................24

Display Status..........................................................................................................24

Display Passcode ....................................................................................................25

Detect Clients...........................................................................................................25

Set Time 12HR.........................................................................................................26

Section 6: Gas Price Operation..................................................................................................27

6.1 Gas Price Controller Operation ...........................................................................................27

6.2 International Gas Price Display Operation........................................................................27

Section 7: Rate Display Operation ............................................................................................29

7.1 Rate Display Controller Operation .....................................................................................29

Section 8: Lottery Display Operation ........................................................................................31

8.1 Lottery Display Controller Operation................................................................................31

Section 9: Troubleshooting........................................................................................................33

9.1 Handheld Controller Error Messages ................................................................................33

9.2 Base Station Errors ................................................................................................................34

IN RANGE LED On Start-up...............................................................................................34

General Base Station Failures ..............................................................................................34

Obtaining Base Station Status Information........................................................................34

9.3 Replacing Handheld Battery ...............................................................................................35

Appendix A: Reference Drawings..................................................................................................37

Appendix B: Daktronics Warranty and Limitation of Liability....................................................39

Introduction 1

Section 1: Introduction

This manual is designed to explain the operation of the Daktronics RC-100 Remote Control System

for DataMaster®applications. For additional information regarding the safety, installation, operation,

or service of this system, refer to the telephone numbers listed in Section 1.2.

Important Safeguards

Read and understand all instructions, both general and for specific applications.

Do not drop the control console or allow it to get wet.

Do not disassemble control equipment or electronic controls of the display;

failure to follow this safeguard will make the warranty null and void.

Always turn off and/or unplug the control equipment when it is not in use.

Never yank the power cord to pull the plug from the outlet. Grasp the plug and

pull to disconnect.

Do not let any power cord touch hot surfaces or hang over the edge of a table that

would damage or cut the cord.

If an extension cord is necessary, a three-pronged, polarized cord should be used.

Arrange the cord with care so that it will not be tripped over or pulled out.

Inspect console for shipping damage such as rattles and dents, and verify that all

equipment is included as itemized on the packing slip. Immediately report any

problems to Daktronics; save all packing materials if exchange is necessary.

1.1 Resources

Figure 1 illustrates a Daktronics

drawing label. The drawing number is

located in the lower-right corner of a

drawing. This manual refers to

drawings by listing the last set of

digits and the letter preceding them.

In the example, the drawing would be

referred to as Drawing C-325405.

Reference Drawing:

System Riser Diagram...........................................................................Drawing C-325405

Daktronics identifies manuals by an ED or DD number located on the cover page of each

manual. For example, this manual would be referred to as ED-15576.

Figure 1: Daktronics Drawing Label

2Introduction

1.2 Daktronics Exchange and Repair & Return Programs

Exchange Program

The Daktronics Exchange Program is a service for quickly replacing key components in need

of repair. If a component fails, Daktronics sends a replacement part to the customer who, in

turn, returns the failed component to Daktronics. This decreases equipment downtime.

Customers who follow the program guidelines explained below will receive this service.

Before Contacting Daktronics

Identify these important numbers:

Assembly Number: ____________________________________________________________

Job/Contract Number: _________________________________________________________

Date Manufactured/Installed: ___________________________________________________

Daktronics Customer ID Number:________________________________________________

To participate in the Exchange Program, follow these steps.

1. Call Daktronics Customer Service:

866-343-3122.

2. When the new exchange part is received, mail the old part to Daktronics.

If the replacement part fixes the problem, send in the problem part being replaced.

a. Package the old part in the same shipping materials in which the replacement

part arrived.

b. Fill out and attach the enclosed UPS shipping document.

c. Ship the part to Daktronics.

3. The defective or unused parts must be returned to Daktronics within 5 weeks of

initial order shipment.

If any part is not returned within five (5) weeks, a non-refundable invoice will be

presented to the customer for the costs of replenishing the exchange parts inventory

with a new part.

Daktronics reserves the right to refuse parts that have been damaged due to acts of

nature or causes other than normal wear and tear.

Introduction 3

Repair & Return Program

For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a

part for repair, follow these steps:

1. Call or fax Daktronics Customer Service:

Phone: 866-343-3122 Fax: 605-697-4444

2. Receive a Return Materials Authorization (RMA) number before shipping.

This expedites repair of the part.

3. Package and pad the item carefully to prevent damage during shipment.

Electronic components, such as printed circuit boards, should be placed in an

antistatic bag before boxing.

4. Enclose:

name

address

phone number

the RMA number

a clear description of symptoms

Shipping Address

Daktronics Customer Service

PO Box 5128

201 Daktronics Drive

Brookings, SD 57006

Fax: 605-697-4444

Daktronics Warranty and Limitation of Liability

The Daktronics Warranty and Limitation of Liability is located in Appendix B. The Warranty

is independent of Extended Service agreements and is the authority in matters of service,

repair, and display operation.

Altri manuali per RC-100

Indice

Altri manuali Daktronics Sistema di controllo

Daktronics

Daktronics RC-100 Manuale utente

Manuali Sistema di controllo popolari di altre marche

Pentair Pool Products

Pentair Pool Products Compool Manuale utente

ComfortNET

ComfortNET CTK04 Manuale utente

Fireye

Fireye InSight II 95DSS3 Manuale utente

CAME

CAME G3000 Manuale utente

Idemia

Idemia MorphoAccess VP MD Manuale utente

Axis

Axis P1445-LE-3 Manuale utente

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuale utente

CNC-Step

CNC-Step High-Z T-Series Manuale utente

Doosan

Doosan DVF Series Manuale utente

Honeywell

Honeywell KAP 140 Manuale utente

Honeywell

Honeywell vk41 series Manuale utente

AirBench

AirBench FPW Guida all'installazione

Cypress

Cypress HHR-3160 Manuale utente

CAME

CAME GLT40AOS Manuale utente

Zonex

Zonex GEN II -VVT Guida utente

Altronics

Altronics K 9650 Manuale utente

micro-trak

micro-trak RoadMaster Manuale utente

micro-trak

micro-trak Calc-An-Acre II Manuale utente