Dancover ARROW 2,6 Manuale utente
20-03-2018
for
Greenhouse
ARROW 2,6
Manual
Length – any divisible by 2 m
Height 2,47 m
width 2,6 m
2
Contents
Weight
max, kg
Frame (base length 2 m)
Package 1 – beams, straight parts and assembly manual 105х980х65 19,1
Package 2 – parts of arches and butt ends 170х1500х65 18,53
Package 3 – straight parts for butt ends, arch reinforcements
100х1290х65 18,4
Package 4
40х1100х750 1,42
Package 5
- weather strips 85х270х200 1,45
Package 6
- fasteners and parts 350x300 3,8
Package 7
* - side ventilating window 5
Inset (extending the frame by 2 m)
Package 1
- beams 80х980х65 12,5
Package 2
- parts of arches and straight parts 135х1480х65 17,5
Package 3
40х1100х750 1,42
Package 4
- fasteners and parts 85х200х200 1,1
5,2
10,4
15,6
20,8
The greenhouse frame is made of zinc-coated iron and assembled with screws and nuts. The
greenhouse is fixed to the ground by digging special supports into the soil or by joining it to
a foundation slab with fastening hooks. The supply package includes everything you need
for fastening the cover surfaces. Cover surface sheets are supplied following the customer’s
request. The greenhouse has two door openings and two ventilating windows in the opposite
ends. Side ventilating windows are supplied following the customer’s request.
Assembly and operation of the greenhouse should be performed in strict
compliance with the assembly manual and operation rules as specified
in the technical certificate. The technical certificate must be preserved.
Description
Greehouse specifcations
Chart 1
Length (m)
2m
4m
6m
8m
Covered area, sqm Number of polycarbonate sheets, 2100x6000 (pcs)
Chart 2
Chart 3
Packages supplied
Package contents
Inset
package numbersGreen-
house
length
2m
4m
6m
8m
Dimensions, mm
*-additional packages supplied following the customer’s request.
Greenhouse ARROW is intended to create the microclimate favorable for growing garden and
allotment crops in gardens and household plots. The area of covered ground depends on the length
of the greenhouse (Chart 1). The high of the installed greenhouse frame is 2,5 m, and
the width of 2,6 m is optimal for two garden beds inside. The greenhouse may be of different length
depending on the customer’s wish. The required length of the greenhouse can be attained by
purchasing additional “Inset” packages each adding 2 m to the base length 2 m (Chart 2).
3
Detailed list of parts for Greenhouse ARROW
Marking
Name Quantity (pcs)
Package 1 (beams and straight parts)
2Beam 20
14 Door diagonal part 4
15 Door diagonal strap 4
19 Ventilating window horizontal part 4
20 Ventilating window vertical part 4
Hooks 4
Package 2 (arch parts)
4н Lower arch 6
4в Upper arch 6
8Upper door opening stand 4
12 Door vertical part 4
Package 3 (straight parts for butt ends, arch reinforcements)
1stand 10
3support 10
5Butt end upper strainer 2
6Butt end lower strainer 6
7Lower door opening stand 4
9Horizontal strainer 1
10 Side brace 4
11 Brace spreader 2
13 Door horizontal part 6
16 Butt end strap 2
17 Door strap for the latch 4
18 Reinforcement nogging piece 2
Left tubular reinforcement 2
Right tubular reinforcement 2
Package 4 (ridge profile)
Ridge profile 2
Package 5 (weather strips)
Hinge strip (m) 3,6
Door strip (m) 10
Butt end strip (m) 12
Package 6 (fasteners and parts)
Angle 20
Ridge strap 3
Support hook 8
Screw М5х10 378
Screw М5х14 22
Screw М5х35 108
Screw М4х8 6
Screw М4х10 4
Screw М4х35 8
Self-tapping screw 8
Nut М5 526
Nut М4 18
Nut М6 6
Washer 124
Washer М6 12
Upper wire bandage 3
Lower wire bandage 6
Hinges 8
Semi-finished rotator (with 2 elastic headers)
4
Pipe for bending 1
Scotch tape 1
Handle 8
Stud pin 4
Bolt М6х60 6
Bolt М5х50 18
Two-side adhesive tape 4,2
Profile 1.05m 4
Technical certificate
Chart 4
4
Detailed list of parts for Side ventilating window Package 7
Name
Quantity, pcs
Package 1
ф1
Long plank
2
ф2
Short plank
2
ф3
Long diagonal part
1
ф4
Short diagonal part
1
Wire stop 1
Wire extender 1
Package 2
Angle
1
Polycarbonate
0,95x0,43
Weather strip
0,95 m
Divisible hinge
2
Screw М5х10
27
Screw М5х35
8
Washer 32х5
8
Nut
М5
35
Clamper 2
Technical certicate
Detailed list of parts for Inset
Package 1
2Beam 20
Package 2
3
Support
4
1
Stand
4
4н Lower arch 4
4в Upper arch 4
9Horizontal strainer 2
10 Side brace 8
11 Brace spreader 4
18 Reinforcement nogging piece 4
Package 3
Ridge profile 2
Package 4
Lower wire bandage 4
Upper wire bandage 2
Ridge strap
2
Screw М5х10 172
Screw М5х35 16
Screw М5х14 4
винт М5х50 4
Screw М4х35 8
Screw М4х8 4
Nut М4 12
Nut М5 196
Nut М6 4
Washer 16
Washer М6 8
Screw М6х60 4
Angle 8
Two-side adhesive tape (m) 4
Profile L=1.0m 4
Chart 5
Chart 6
5
Technical certi cate
1.
Before the start of operation, the
greenhouse should be assembled and
installed as prescribed in the manual.
When the greenhouse is assembled
by a third party the customer should
supervise the quality of works to ensure
compliance with the present manual.
2.
The greenhouse cover surface should
not be removed for the winter period if
snow load is limited. If the greenhouse
is left unattended for the entire winter
the customer should either remove the
cover surface or estimate the possible
snow load. For the frame assembled
with all parts including strainers and
braces, the maximal snow load begins
when the layer of snow weight is 450
kg per 1 sqm of horizontal surface,
which corresponds to 2.25 m of fresh
snow and 1.1 m of settled snow.
The recommended thickness of the
When the greenhouse is assembled
Operation rules
Cleaning and washing sheets of polycarbonate.
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of soft soap or with a domestic detergent and
warm water, using a soft rag or a sponge to take away the dirt.
3. Rinse with cold water and dry with a soft rage to take away the water.
By disinfection of the greenhouse from fungus and biological diseases
pathogens do not use “sulphuric sticks”
When cleaning polycarbonate sheets never use abrasives or high-alkali
cleaning compositions. Dry wiping of the surface can damage the protective
layer and reduce its life cycle. Never use brushes, gauze fabric or other
abrasive materials to wipe the surface of polycarbonate sheets.
honeycomb polycarbonate (4 mm) is
sufficient for midland Russia conditions.
However, for areas where snow layer
exceeds 0.6 m the upper part of the
greenhouse should be covered by thicker
polycarbonate in accordance with local
weather conditions.
Do not install the greenhouse too close
to buildings or trees where masses of
snow/ice can fall on it. Recommended
distance is at least 1 m.
The greenhouse is designed to withstand
wind at the speed below 24 m/sec
6
Warranty responsibility
1. The manufacturer shall be responsible for the complete set of parts for
the greenhouse frame.
2. The manufacturer shall be responsible for assemblability of the
greenhouse in accordance with the manual.
3. The manufacturer shall be responsible for the greenhouse endurance in
the specified weather conditions.
4. Time period for making claims is 24 months after the day of purchase.
Warranty provisions
Warranty responsibility shall not cover the following cases:
1. Installation of the greenhouse in violation of the manual provisions.
2. Violation of operation rules.
3. Unintended use of the greenhouse.
4. Deformation of the greenhouse due to soil movement.
5. Floods, hurricanes and other natural disasters.
The manufacturer shall retain the right
to make changes to the greenhouse design.
Warranty responsibility
7
Manual
Installation manual for Greenhouse ARROW
General view of the frame is given in Picture 1 .Parts should be installed in
such a way that side selves of the profile are facing the surface cover. The
frame is assembled of numbered parts.
Symbols:
-arrow shows the direction of
installation as per schemes in the
manual.
Parts are fastened by putting profiles together and fastening them with
screws and nuts through the holes. When joining parts in “profile-to-
profile” way it does not matter which of the joined parts is above.
When assembling be careful not to damage the parts as they do not
have sufficient endurance before the whole structure is assembled. Use
supports (e.g. chairs) at interim stages of assembly to make sure the frame
is lifted steadily and evenly. To make sure holes coincide when assembling
complicated joints, use a 5 mm thick nail or a cone-shaped hand-punch.
1.
2.
3.
4.
Some parts may have spare
holes which are there due to
uniformity of parts.
introduction
Be careful when assembling the greenhouse! Parts have sharp edges.
Beware of cuts! Perform all works in protective gloves.
When assembling the frame parts should be joined through all holes
as prescribed. A simplified fastening of parts with only one or two
screws is the violation of assembly rules and the ground to relieve the
manufacturer of the warranty responsibility.
8
Manual
General view of the frame (Greenhouse ARROW)
(view from outside)
4В
Ridge strap
Angle
4В
22
4Н
62
1
Support hook
4Н
(view from outside)
4В
5
Support hook
7
1
6
6
(view from outside)
Angle
4Н
2
3
1
В
Б
Г
Е
Д
4Н
4Н
4В
4В
5
2
2
9
10
10
5
7
8
6
6
6
1
1
3
2
2
2
2
6
11
18
18
2
Pic. 1
(view from outside) (view from inside)
А
А
Г EД
Б В
Angle
(view from inside)
9
Manual
General view of the frame, Greenhouse ARROW
Greenhouse ARROW
extended by any number
of insets.
Pic. 2
Pic. 3
General view of the inset for
Greenhouse ARROW.
Each inset extends the
greenhouse length by 2 m.
858
4060
1000100010001000
2577
Plan of greenhouse stands
resting on the foundation
Pic. 4
60
21
Altri manuali Dancover Kit serra
Dancover
Dancover TITAN Arch+ 320 Manuale utente
Dancover
Dancover ZEN 6.25M2 Manuale utente
Dancover
Dancover GH152190 Manuale utente
Dancover
Dancover TITAN Arch 196 Manuale utente
Dancover
Dancover STRONG 3x4 m Manuale utente
Dancover
Dancover Polytunnel Greenhouse 3x8m Manuale utente
Dancover
Dancover TITAN Arch+ 60 Manuale utente
Dancover
Dancover gh21200 Manuale utente
Dancover
Dancover Polytunnel Greenhouse 3x6m Manuale utente
Dancover
Dancover GH82121 Manuale utente
Dancover
Dancover Raised Bed 1x2m Manuale utente
Dancover
Dancover GH152190 Manuale utente
Dancover
Dancover Mini Greenhouse Manuale utente
Dancover
Dancover GH152200 Manuale utente
Dancover
Dancover ASTRA GH120150 Manuale utente
Dancover
Dancover GH152200 Manuale utente
Dancover
Dancover GH97200 Manuale utente
Dancover
Dancover GH82020 Manuale utente
Dancover
Dancover Orangery GH170010 Manuale utente
Dancover
Dancover STRONG Series Manuale utente
