Dell EMC SD-WAN Edge 3000 Series Manuale utente
Dell EMC SD-WAN Edge 3000 Series
Setup Guide
August 2019
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of
your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of
data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury,
or death.
© 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are
trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
owners.
2019 - 08
Rev. A00
Contents
1 Edge 3000 Series............................................................................4
Installation instructions ........................................................................... 4
Specications............................................................................................6
Contents 3
Edge 3000 Series
The Dell EMC SD-WAN Edge 3000 Series (3400 and 3800) is a purpose-built platform that
is integrated with VMware SD-WAN by VeloCloud software.
For detailed installation instructions, see the Dell EMC SD-WAN Edge 3000 Series
Installation Guide at www.dell.com/support.
After unpacking the Edge 3000 Series, inspect the device and immediately report any
damage to your Dell EMC sales representative.
Topics:
• Installation instructions
•Specications
Installation instructions
Information icon denitions:
• The Warning icon signals information about hardware handling that could result in injury.
• The Caution icon signals information about situations that could result in equipment
damage or lost of data.
• The Note icon signals important operational information.
Install the device
WARNING: To avoid electrostatic discharge (ESD) damage, wear grounding wrist
straps when handling this equipment.
WARNING: This device has optical transceivers, which comply with the limits of
Class 1 laser radiation. When working with optical bers, follow all warning labels
and always wear eye protection.
WARNING: When no cable is connected, visible and invisible laser radiation may be
emitted from the aperture of the optical transceiver ports. Avoid exposure to laser
radiation and do not stare into open apertures.
4 Edge 3000 Series
Install the device in an area that meets the following safety requirements:
• Near a properly grounded AC power outlet.
• In a temperature-controlled room with a continuous temperature range from 0°C to
45°C (32°F to 113°F).
• In a dry, clean, and well-ventilated room away from heat sources such as hot air vents or
direct sunlight
• Away from severe electromagnetic noise
• Away from direct view within the workplace
1 Connect the power adapter to the AC power outlet. These power modules are 1+1
redundant power supplies.
NOTE: Connect the device to a properly wired earth-ground AC power
outlet.
2 Connect one of the default WAN ports (GE3-6 or SFP1-4) to an available Internet
connection. SFP modules are not included.
3 If you received an email from your IT administrator, follow the instructions in the email
to complete the Edge activation.
Edge 3000 Series 5
You can nd additional information from the VCO or the Dell EMC support site at
www.dell.com/support. If you did not receive an email, request the setup instructions
from your IT administrator or open a Dell EMC support request.
4 Connect local devices such as computers and switches to either GE1 or GE2 ports.
• GE1 or GE2 ports
NOTE: The RJ45 ports on the left side of the box are for console/
administration access only.
After following these instructions, if you are still unable to activate the Edge, contact your IT
administrator or open a Dell EMC support request.
Specications
Table 1. Edge 3000 Series specications
Feature Specication
Size 17.1 in x 15.0 in x 1.72 in (W x D x H)
43.4 cm x 38.1 cm x 4.37 cm (W x D x H)
Chassis weight with factory-installed
components including one rNDC carrier
card, one rNDC card, and one blank panel
• 16 core: 16.50 lbs (7.48 kg)—2 PSUs
and 5 fans
• 8 core: 16.60 lbs (7.53 kg)—2 PSUs and
4 fans
AC power input 100 VAC–240 VAC, 50/60 Hz
AC typical current draw per system • 16 core: 110 VAC: 1.89 A
• 8 core: 110 VAC: 1.62 A
• 16 core: 240 VAC: 0.87 A
• 8 core: 240 VAC: 0.75 A
6 Edge 3000 Series
Feature Specication
Maximum power consumption • 16 core processor with ve fans: 312 W
• 8 core processor with four fans: 242 W
Typical power consumption • 16 core processor with ve fans: 208 W
• 16 core processor with ve fans: 178 W
RoHS information Go to: Restricted Material Compliance.
Table 2. Edge 3000 Series temperatures
Feature Specication
Operating temperature 0°C to 45°C (32°F to 113°F)
Storage temperature –40°C to 70°C (-40°F to 158°F)
Operating relative humidity 5% to 85% (RH), non-condensing
continuously
5% to 90% (RH), non-condensing short
term (< 1% of operational hour per year)
Storage relative humidity 5% to 90% (RH)
Operating altitude Maximum: 10,000 feet (3,048 meters)
No performance degradation up to 3,117 feet
(950 meters)
Edge 3000 Series 7
Altri manuali per SD-WAN Edge 3000 Series
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Dell EMC Server
Dell EMC
Dell EMC VxRail P series Manuale utente
Dell EMC
Dell EMC VxRail E series Manuale utente
Dell EMC
Dell EMC PowerEdge MX740c Manuale
Dell EMC
Dell EMC PowerEdge R940xa Manuale utente
Dell EMC
Dell EMC DSS 9600 Manuale
Dell EMC
Dell EMC 6WDJR Manuale
Dell EMC
Dell EMC VxRail 60 Series Manuale utente
Dell EMC
Dell EMC PowerEdge XE7420 Manuale
Dell EMC
Dell EMC PowerEdge T340 Manuale
Dell EMC
Dell EMC PowerEdge R740 Guida rapida
Dell EMC
Dell EMC VxRail E series Manuale utente
Dell EMC
Dell EMC VxRail E series Manuale utente
Dell EMC
Dell EMC PowerEdge FC430 Manuale utente
Dell EMC
Dell EMC PowerEdge T440 Manuale
Dell EMC
Dell EMC PowerEdge R740xd Manuale
Dell EMC
Dell EMC PowerEdge T40 Manuale
Dell EMC
Dell EMC PowerEdge R6525 Manuale
Dell EMC
Dell EMC PowerEdge R740xd2 Manuale
Dell EMC
Dell EMC PowerEdge R7425 Manuale
Dell EMC
Dell EMC PowerEdge R7515 Manuale
