Dell 8 Manuale tecnico

Intel Xeon 5600 Series Processors—

Information Update

Important Information

• Your system requires a BIOS and iDRAC firmware upgrade to support Intel

Xeon 5600 series processor (less than 130 W). You can download the BIOS and

iDRAC firmware for the Intel Xeon 5600 series processor at

support.dell.com

NOTE: A BIOS and iDRAC firmware update only supports a limited feature set of

the Intel Xeon 5600 series processor.

• The following new Dell PowerEdge systems marked with the Roman Numeral

II on the chassis support the complete feature set of Intel Xeon 5600 series

processors:

– R410

– R510

– R610

– R710

– T410

– T610

– T710

– M610

– M710

NOTE: The PowerEdge R410, T410, and R510 systems do not support 130 W

Intel Xeon 5600 series processors.

NOTE: The modular systems, PowerEdge M610 and M710, support the 130 W

Intel Xeon X5680 only in the 130 W processor category.

NOTE: The PowerEdge R610 and M710 systems need specific heat sinks to

support the 130 W Intel Xeon 5600 series processors.

• Mixing of Intel Xeon 5500 and 5600 series processors is not supported.

• Systems with the Intel Xeon 5600 series processors support memory sparing.

December 2010

Low Voltage Memory Modules (DDR3L DIMMs)

Intel Xeon 5600 series processors

support DDR3L DIMMs enabling a lower

operating voltage (1.35 V) that ensures memory power savings up to 20% per

DIMM. DDR3L memory is backward-compatible to Intel Xeon 5500 series and

operates at standard voltage (1.5 V) without any limitations.

Operating the system memory at a lower voltage may cause restrictions to

additional frequency and memory population capabilities. For example,

populating three memory modules per channel is not supported at 1.35 V.

Systems with

1.35 V DDR3L memory

operates the memory modules at 1.5 V

if any of the following conditions exist:

• Intel Xeon 5500 series processors

• Two 1333 MHz DIMMs per channel

• A combination of both standard and low voltage memory modules

For information on the memory configuration guidelines, see your system’s

Hardware Owner’s Manual at support.dell.com/manuals.

NOTE: BIOS setup options allow the user to control frequency and voltage

configuration within allowable limits.

New BIOS Setup Options

Integrated Devices Screen

Option Description

SR-IOV-Global Enable

(

Disabled

default)

Enables/disables BIOS configuration of Single Root I/O

Virtualization (SR-IOV) devices.

NOTE: Applies to PowerEdge R410, R510, R610, R710, R910,

T410, T610, and T710 systems only.

Memory Settings Screen

Processor Settings Screen

Option Description

System Memory Voltage Displays the system memory voltage.

Memory Operating Voltage

(Auto Default)

Sets the system memory voltage selection.

Memory Operating Mode Displays the type of memory operation if a valid memory

configuration is installed. When set to Optimizer mode, the

memory controllers run independent of each other for

improved memory performance. When set to Mirror mode,

memory mirroring is enabled. When set to Advanced ECC

Mode, two controllers are joined in 128-bit mode running

multi-bit advanced ECC. The Spare mode option is present

on systems with the Intel Xeon 5600 series processors only.

Option Description

Intel(R) TXT (Disabled default) Enables/disables Trusted Execution Technology.

To enable TXT, enable & activate VT & TPM with

pre-boot measurement.

C1E (Enabled default) Sets the processor performance state to minimum

when the system is idle.

Intel QPI Bandwidth Priority

(Compute default)

Sets the bandwidth priority to compute or I/O.

Recommended for HPC applications.

Adjacent Cache Line Prefetch

(Enabled default)

Enables high utilization of sequential memory access.

NOTE: Disable this option for applications that require

high utilization of random memory access.

Hardware Prefetcher

(Enabled default)

Enables or disables the hardware prefetcher.

DCU Streamer Prefetcher

(Enabled default)

Enables Data Cache Unit streamer prefetcher.

Recommended for HPC applications.

Data Reuse

(Enabled default)

Enables or disables data reuse. Recommended

for HPC applications.

New POST Messages

The following are the new POST messages for the Intel Xeon 5600 series

processors.

Enabling Dell BIOS Intelligent Turbo Mode

The Dell BIOS Intelligent Turbo Mode feature allows the operating system to set

the processor performance in the turbo mode. Based on the processor utilization,

this feature delays the processor turbo mode initiation for better power

management. When the turbo mode is enabled in the Processor Settings screen

of the system setup, the feature can be enabled or disabled using the following

BIOS setup options:

NOTE: The Dell BIOS Intelligent Turbo Mode is disabled when the turbo mode is

disabled in the processor system setup screen.

Message Description

System Memory Size:

X.X GB, System Memory

Speed: XXX MHz,

Voltage: 1.5V or 1.35V

Displays the amount of system memory, system

memory speed, and current system memory

operating voltage.

This CPU power rating

is not supported

This message displays when either of the following

occurs:

• The Intel Xeon 5600 130 W series processor is

detected on an old system board (systems not

marked with roman numeral II). For a list of the

supported systems, see "Important Information".

• The Intel Xeon X5677 130 W series quad-core

processor is detected on PowerEdge M610 and

M710.

Non-ECC DIMM detected

on DIMM XX

Displays when the system detects a non-ECC

memory module.

Setup Screen Field Field value Intelligent Turbo

Power Management CPU Power and

Performance Management

OS DBPM Enabled

Power Management CPU Power and

Performance Management

System DBPM Disabled

Power Management CPU Power and

Performance Management

Maximum

Performance

Disabled

____________________

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is

strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc. Intel

and Xeon

are registered trademarks of Intel Corporation in the U.S. and other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

Intel Xeon 5600 系列处理器—

信息更新

重要信息

•

系统需进行

BIOS

和

iDRAC

固件更新才能支持

Intel Xeon 5600

系列处理器

（小于

130 W

）。要下载适用于

Intel Xeon 5600

系列处理器的

BIOS

和

iDRAC

固件，请录

support.dell.com

。

注：BIOS 和iDRAC 固件更新仅支持 Intel Xeon 5600 系列处理器的有限功

能组。

•

以下机箱上标有罗马数字“

”的新

Dell PowerEdge

系统支持

Intel

Xeon 5600

系列处理器的完整功能组：

–R410

–R510

–R610

–R710

–T410

–T610

–T710

–M610

–M710

注：PowerEdge R410、T410 和R510 系统不支持 130 W Intel Xeon 5600 系列处

理器。

注：模块化系统 PowerEdge M610 和M710 仅支持 130 W 处理器类别中的 130

W Intel Xeon X5680。

注：PowerEdge R610 和M710 系统需使特定散热器才能支持 130 W Intel

Xeon 5600 系列处理器。

•

不支持混合使用

Intel Xeon 5500

和

5600

系列处理器。

•

配有

Intel Xeon 5600

系列处理器的系统支持内存备用功能。

2010 年12 月

低电压内存模块 (DDR3L DIMM)

Intel Xeon 5600

系列处理器支持

DDR3L DIMM

，可使用较低的操作电压

(1.35 V)

，确保每个

DIMM

的内存电源节能量高达

20%

。

DDR3L

内存对

Intel

Xeon 5500

系列具有向后兼容性，可在标准电压

(1.5 V)

下运行而不受限制。

在较低电压下运行系统内存可能会对额外的频率和内存安装容量产生限制。

例如，

1.35 V

时，不支持在每个通道中安装三个内存模块。

如果存在以下任意一种情形，则配有

1.35 V DDR3L

内存的系统将在

1.5 V

电压

下运行内存模块：

•Intel Xeon 5500

系列处理器

•

每个通道有两个

1333 MHz DIMM

•

同时使用了标准电压内存模块和低电压内存模块

有关内存配置原则的信息，请录

support.dell.com/manuals

，查看您系统的

《硬件用户手册》。

注：通过 BIOS 设置选项，户可以在容许限制内控制频率和电压配置。

新的 BIOS 设置选项

Integrated Devices（集成设备）屏幕

Memory Settings（内存设置）屏幕

选项说明

SR-IOV-Global Enable

（

SR-IOV

全局启用）

（默认为

Disabled

[

已禁用

]

）

启用

禁用单根

I/O

虚拟化

(SR-IOV)

设备的

BIOS

配置。

注：仅适于 PowerEdge R410、R510、R610、R710、

R910、T410、T610 和T710 系统。

选项说明

System Memory Voltage

（系统内存电压）

显示系统内存电压。

Memory Operating Voltage

（系统操作电压）

（默认为 Auto [ 自动 ]）

设置系统内存电压选择。

Processor Settings（处理器设置）屏幕

Memory Operating Mode

（内存运行模式）

如果安装了效内存配置，则会显示内存运行类型。设

置为 Optimizer mode（优化器模式）时，内存控制器彼

此独立运行，以提高内存性能。设置为 Mirror mode

（镜像模式）时，则将启用内存镜像。设置为 Advanced

ECC Mode（高级 ECC 模式）时，两个控制器将组合成

128 位的模式，运行多位高级 ECC。Spare mode（备用

模式）选项仅出现在配 Intel Xeon 5600 系列处理器的

系统中。

选项说明

Intel(R) TXT（默认为 Disabled

[已禁用 ]）

启用 /禁用受信任的执行技术。要启用 TXT，启用

并激活 VT 和TPM，并进行预引导测量。

C1E（默认为 Enabled

[已启用 ]）

当系统闲置时，将处理器性能状态设置为最低。

Intel QPI Bandwidth Priority

（Intel QPI 带宽优先级）

（默认为 Compute [ 计算 ]）

将带宽优先级设置为 compute（计算）或 I/O。建议

用于 HPC 应用程序。

Adjacent Cache Line Prefetch

（相邻的高速缓存行预先

访存）（默认为 Enabled

[已启用 ]）

启用顺序内存访问的高使用率。

注：对于需要大量使随机内存访问的应程序，

请禁此选项。

Hardware Prefetcher（硬件预先

访存技术）

（默认为 Enabled [ 已启用 ]）

启用或禁用硬件预先访存技术。

DCU Streamer Prefetcher

（DCU 流转化器预先访存

技术）

（默认为 Enabled [ 已启用 ]）

启用 Data Cache Unit streamer prefetcher（数据高速

缓存设备流转化器预先访存技术）。建议用于 HPC

应用程序。

Data Reuse（数据重复使用）

（默认为 Enabled [ 已启用 ]）

启用或禁用数据重复使用。建议用于 HPC 应用

程序。

选项说明

新的 POST 信息

以下是启动

Intel Xeon 5600

系列处理器时出现的新的

POST

信息。

启用 Dell BIOS 智能 Turbo 模式

Dell BIOS

智能

Turbo

模式功能允许操作系统在

turbo

模式下设置处理器性能。

为实现更好的电源管理，该功能会根据处理器使用情况，延迟处理器

turbo

模

式的启动。如果在系统设置的

Processor Settings

（处理器设置）屏幕中启用了

turbo

模式，则可使用以下

BIOS

设置选项启用或禁用该功能：

注：如果在处理器系统设置屏幕中禁了 turbo 模式，则会禁 Dell BIOS 智能

Turbo 模式。

信息说明

System Memory Size:

X.X GB, System Memory

Speed: XXX MHz,

Voltage: 1.5V or 1.35V

显示系统内存容量、系统内存速率以及当前系统

内存的操作电压。

This CPU power rating

is not supported

发生以下任一情形时，会显示此信息：

•

在旧主机板（没有标罗数字 “

”的系统）

上检测到

Intel Xeon 5600 130 W

系列处理器。

有关支持的系统的列表，请参阅 “重要信息”。

•

在

PowerEdge M610

和

M710

上检测到

Intel Xeon

X5677 130 W

系列四核处理器。

Non-ECC DIMM detected

on DIMM XX

系统检测到非 ECC 内存模块时会显示此信息。

设置屏幕字段字段值智能 Turbo

电源管理 CPU Power and

Performance Management

（CPU 电源和性能管理）

OS DBPM 已启用

电源管理 CPU Power and

Performance Management

（CPU 电源和性能管理）

System DBPM

（系统 DBPM）

已禁用

电源管理 CPU Power and

Performance Management

（CPU 电源和性能管理）

Maximum

Performance

（最佳性能）

已禁用

Altri manuali per 8

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Dell Server

Dell

Dell DSS 2500 Manuale utente

Dell

Dell PowerEdge T605 Manuale utente

Dell

Dell PowerEdge C6320 Manuale utente

Dell

Dell PowerEdge M1000e Guida rapida

Dell

Dell PowerEdge C6220 II Manuale utente

Dell

Dell EMC PowerEdge R640 Manuale

Dell

Dell Dimension 2400 Series Manuale utente

Dell

Dell PowerEdge 2970 Manuale tecnico

Dell

Dell PowerEdge C6220 Manuale utente

Dell

Dell IP4700 Istruzioni di installazione e manutenzione

Dell

Dell E43S001 Manuale utente

Dell

Dell PowerEdge C6320 Manuale utente

Dell

Dell PowerEdge R815 Manuale utente

Dell

Dell PowerEdge 2650 Manuale utente

Dell

Dell PowerEdge C8000 Manuale utente

Dell

Dell Precision Workstation 350 Manuale tecnico

Dell

Dell PowerEdge C6145 Manuale utente

Dell

Dell PowerEdge C6100 Scheda tecnica

Dell

Dell poweredge t330 Manuale utente

Dell

Dell PowerEdge T350 Manuale

Dell

Dell Wyse ThinOS T10 Manuale utente

Dell

Dell PowerEdge 4400 Manuale tecnico

Dell

Dell PowerEdge T710 Manuale tecnico

Dell

Dell Wyse 7030 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente

Planet

Planet NAS-7410 Manuale utente

Lenovo

Lenovo ThinkSystem SR635 V3 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX900 Manuale utente

Asus

Asus RS700DA-E6 PS4 Manuale utente