Dell PowerEdge R900 Manuale tecnico

Information Update

Added Support for 8-GB Memory Modules

Your Dell™ PowerEdge™ R900 system now supports the following 8-GB memory

configurations:

• 32 GB — 4 x 8-GB quad-rank memory modules

• 64 GB — 8 x 8-GB quad-rank memory modules

NOTE: If 64 GB of memory is installed, the system will only recognize and display

63.75 GB during POST.

• 128 GB — 16 x 8-GB quad-rank memory modules

• 256 GB — 32 x 8-GB quad-rank memory modules

NOTE: Prior to upgrading your system, verify that the latest system BIOS version is on

your system. Loading the latest BIOS version from support.dell.com will ensure that

your system is fully supported.

NOTE: Some operating systems cannot support more than 4 GB of physical memory.

For more information on memory support requirements and restrictions, refer to the

operating system documentation that ships with your system.

BMC and DRAC5 Firmware Version Requirements

When upgrading either the BMC or the DRAC5, you must update the firmware

for both components to ensure full functionality and compatibility.

For example, the power reduction feature of the DRAC5 version 1.40 firmware

works only when BMC 2.27 or higher is also installed. If the BMC and DRAC

firmware are incompatible—BMC 2.27 installed with DRAC5 version 1.33 or

BMC 1.79 installed with DRAC5 version 1.40—the power reduction feature may

not function correctly.

September 2008

Back Cooling Fans

Systems manufactured after September 2008 no longer include the four back

cooling fans installed in earlier systems. Therefore, BMC version 2.27 does not

recognize the presence of back fans. The back fans will still run in older systems;

however, from a system perspective, the fans do not exist and are not monitored.

As a result, if the back fans fail, the SEL, server management software, and

remote access card will not log the error. This change does not compromise the

standard hot plug and redundancy features of the front fans.

New LCD Error Codes

The following LCD error codes have been added for your system. For a complete

list of error codes, see "About Your System" in your Hardware Owner’s Manual.

Table 1. LCD Status Messages

Code Test Causes Corrective Actions

EB107 Proc

Machine

Check Error

CPU detected an

unrecoverable hardware

error.

See error EB113 for

specific information on

what hardware failed.

EB113 PCIE Fatal

Error Slot

CPU detected an

unrecoverable hardware

error.

"XX" indicates the slot

associated with the failed

hardware. If you are unable

to resolve the issue, see

"Getting Help" in your

Hardware Owner’s Manual.

E1A18 PDB Ctrl

Cable

PDB control cable is

missing, loose, or faulty.

Reseat the cable. If

problem persists, replace

the cable. See "Getting

Help" in your Hardware

Owner’s Manual.

E1118 CPU Temp

Interface

Processor has exceeded

acceptable temperature

and has been disabled to

prevent damage.

See "Troubleshooting

System Cooling" in your

Hardware Owner’s Manual.

New SEL Sensor Messages

The following SEL sensor messages have been added to the systems

management software and remote access card software.

E1716 Chipset The BIOS has determined

that there is a problem

with the chipset, but is

unable to determine its

origin.

See "Getting Help" in your

Hardware Owner’s Manual.

E1717 IERR CPU is faulty. Applicable

only for BIOS 1.1.9 and

BMC 2.27 and later.

Either the CPU or system

board must be replaced. See

"Getting Help" in your

Hardware Owner’s Manual.

E1914 DRAC5 Conn

2 Cbl

DRAC5 cable is missing,

loose, or faulty.

Reseat the cable. If

problem persists, replace

the cable. See "Getting

Help" in your Hardware

Owner’s Manual.

E2122 Fatal Mem

Reset

System memory failed. See "Troubleshooting

System Memory" in your

Hardware Owner’s Manual.

I1915 Video Off Local video is disabled. Information only.

I1916 Video Off

in XX

Remote disabling of local

video currently in process.

Information only.

NOTE: For the full name of an abbreviation or acronym used in this table, see "Glossary"

in your Hardware Owner’s Manual.

Table 2. Sensor Message Definitions

Sensor Number Message Definition

0x26 PCIE Non Fatal

error

A non-fatal error occurred. The system

will continue to operate normally.

Table 1. LCD Status Messages (continued)

Code Test Causes Corrective Actions

System Board Replacement - Safeguarding

Encrypted Data

On systems using an operating system that supports the Trusted Platform

Module (TPM) and related encryption programs, you can use these features to

secure the contents of the hard drive(s).

If you are using the TPM with an encryption program, you may be prompted to

create a recovery key during system or program setup. Be sure to create and safely

store this recovery key. If you ever need to replace the system board, you must

supply the recovery key when you restart your system or program, before you can

access the encrypted data on your hard drive(s).

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is

strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

0x27 Generic Fatal

I/O Error

A fatal I/O error occurred. The system

will no longer respond.

0x28 Processor

Machine Check

Error

A processor error occurred. The system

will no longer respond.

NOTE: For the full name of an abbreviation or acronym used in this table, see

"Glossary" in your Hardware Owner’s Manual.

Table 2. Sensor Message Definitions (continued)

Sensor Number Message Definition

Altri manuali per PowerEdge R900

Altri manuali Dell Server

Dell

Dell PowerEdge 2410 Manuale utente

Dell

Dell PowerEdge 2410 Manuale utente

Dell

Dell PowerEdge UPS 500T Manuale elenco delle parti

Dell

Dell PowerEdge HS5610 Manuale

Dell

Dell PowerEdge R210 II Manuale utente

Dell

Dell 8 Manuale tecnico

Dell

Dell PowerEdge FX2 Manuale utente

Dell

Dell PowerEdge PDU Managed LED Manuale utente

Dell

Dell PowerEdge R830 Manuale utente

Dell

Dell PowerVault NX3100 Manuale utente

Dell

Dell PowerEdge C6220 II Manuale utente

Dell

Dell PowerEdge R310 Manuale utente

Dell

Dell PowerVault NX3000 Manuale utente

Dell

Dell PowerEdge 350 Manuale utente

Dell

Dell PowerEdge T710 Manuale utente

Dell

Dell PowerEdge HR675 Manuale utente

Dell

Dell PowerEdge E07S Series Manuale utente

Dell

Dell PowerEdge T110 II Guida rapida

Dell

Dell E02B005 Manuale

Dell

Dell FC4500 Guida all'applicazione

Dell

Dell POWEREDGE 4300 Manuale utente

Dell

Dell PowerEdge C410X Manuale utente

Dell

Dell PowerEdge 600SC Manuale tecnico

Dell

Dell DL4300 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente

Planet

Planet NAS-7410 Manuale utente

Lenovo

Lenovo ThinkSystem SR635 V3 Manuale utente

Fujitsu

Fujitsu PRIMERGY BX900 Manuale utente

Asus

Asus RS700DA-E6 PS4 Manuale utente