DFI AD73 Pro Manuale utente

AD73 Pro

Rev. A+

System Board User’s Manual

Carte Mère Manuel Pour Utilisateur

System-Platine Benutzerhandbuch

Manual del Usuario de Placas Base

55100205

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Microsoft® MS-DOS®, WindowsTM, Windows® 95, Windows® 98,

Windows® 98 SE, Windows® ME, Windows® 000, Windows NT®

4.0 and Windows® XP are registered trademarks of Microsoft

Corporation. AMD, AthlonTM and DuronTM

are registered trademarks

of Advanced Micro Devices, Inc. VIA is a registered trademark of

VIA Technologies, Inc. Award is a registered trademark of Award

Software, Inc. Other trademarks and registered trademarks of

products appearing in this manual are the properties of their

respective holders.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend by

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s instructions.

Joystick or MIDI port:

• Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

CC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

. Shielded interface cables must be used in order to comply with

the emission limits.

Quick Setup Guide

Quick Setup

Guide

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

English......................................................................

Chapter 3

Français (French).................................................

Chapter 4

Deutsch (Ger an)................................................

Chapter 5

Español (Spanish)..................................................

Note:

The user’s manual in the provided CD contains detailed information

about the system board. If, in some cases, some information doesn’t

match those shown in this manual, this manual should always be

regarded as the most updated version.

Quick Setup Guide

Quick Setup

Guide

Chapter 1 - Quick Setup Guide

Table of Contents

1.1 System Board Layout..................................................................................................

1. Jumpers.....................................................................................................................................

1.3 Ports and Connectors................................................................................................

1.4 Award BIOS Setup Utility.......................................................................................

Important:

To ensure proper boot up and operation of your system, you must

power-off the system then turn off the power supply’s switch or

unplug the AC power cord prior to altering the setting of a umper

or replacing the CPU.

Quick Setup Guide

Quick Setup

Guide

1.1 Syste Board Layout

Mouse

USB

USB 1

(J7)

USB

COM 1 (J1)

Parallel (J8)

COM 2 (J2)

Game/MIDI (J12)

Line

out

(J3)

Line

(J4)

Mic

(J5) CD-in (J13)

AUX-in (J14)

CPU fan

(J16)

Power select

USB 1 (JP4)for

PS/2 power

select (JP3)

Socket 462

(Socket A)

DIMM

standby

power LED

DDR SDRAM

DIMM 1

DDR SDRAM

DIMM 2

DDR SDRAM

DIMM 3

Primary IDE (J22)

Secondary IDE (J23)

VIA

KT-266A

VIA

VT8233ACD

CPU FSB

select (JP8)

Wake-On-Ring

(J26)

FDD (J24)

Wake-On-LAN J19

Clear CMOS (JP9)

PWR-LED

ATX-SW

G-LED G-SW

Chassis fan

(J21)

HD-LED RESET SPEAKER

USB 2 (J20)

CNR setting (JP6) Power select

USB 2 (JP7)for

Winbond

W83697HF

BIOS

JP1

JP2

IrDA

(J11)

Onboard audio

codec settings

(JP1 & JP2)

AC’97 PCI standby power LED

3.3VSB standby for PCI (JP5)

AGP Slot

PCI Slot 1

PCI Slot 2

PCI Slot 3

PCI Slot 4

PCI Slot 5

CNR Slot

TAD (J15)

Front audio

(J9)

ATX powe r

(J17)

Second chassis

fan (J18)

10 2

15 J25

USB 1

(Black)

Mouse

(Green)

(Purple)

COM 1 COM 2

Parallel

(Burgundy)

Game/MIDI

(Gold)

Line-In

(Light Blue)

Line-Out

(Lime)

Mic-In

(Pink)

USB 2

(Black)

(Teal/Turquoise)

Quick Setup Guide

Quick Setup

Guide

1.2 Ju pers

321

Clear

CMOS (JP9)

1.2.1 Clear CMOS Data - JP9

-3 On:

Clear CMOS Data

1- On:

Normal (default)

321

1.2.2 Onboard Audio Codec - JP1 and JP2

1- On:

Enable the

Onboard Audio

Codec (default)

-3 On: Disable

the Onboard

Audio Codec

If you are not using the onboard audio codec, set pins and 3 to On

(Disabled) and set the “VIA-3058 AC97 Audio” (“VIA OnChip PCI

Device” field) in the Integrated Peripherals submenu of the BIOS to

Disabled.

JP1

Onboard audio

codec settings

(JP1 & JP2)

321

JP2

JP1

321

JP2

JP1

JP2

321

Quick Setup Guide

Quick Setup

Guide

1.2.4 Po er Select for USB 1 (JP4) and USB 2 (JP7)

-3 On:

5VSB

1- On:

5V (default)

1.2.3 CPU’s Front Side Bus - JP8

On: 100MHz

( 00MHz DDR) CPU

(default)

Off: 133MHz

( 66MHz DDR) CPU

To ensure proper boot up and operation of your system, you must power-

off the system then turn off the power supply’s switch or unplug the AC

power cord prior to altering the setting of the jumper.

When using a 1. GHz CPU under Windows® XP operating system, the

VIA KT- 66A chip must be installed with a fan that is connected to the

“second chassis fan” connector.

CPU FSB

select (JP8)

Power select

USB 2 (JP7

)

for

Power select

USB 1 (JP4)for

321

JP4

JP7

321

Quick Setup Guide

Quick Setup

Guide

1.2.6 CNR Settings - JP6

-3 On:

Secondary

1- On:

Primary (default)

1.2.5 Po er Select for PS/2 Keyboard/Mouse (JP3)

PS/2 power

select (JP3)

-3 On:

5VSB

1- On:

5V (default)

321

CNR setting

(JP6)

321

Quick Setup Guide

Quick Setup

Guide

1.3 Ports and Connectors

1.31 PS/2 Mouse and PS/2 Keyboard Ports

Make sure to turn off your computer

prior to connecting or disconnecting a

mouse or keyboard. Failure to do so

may damage the system board.

PS/ Mouse

PS/ Keyboard

1.3.2 Parallel Port

Parallel Port

Mouse

(Green)

(Purple)

Parallel

(Burgundy)

Altri manuali per AD73 Pro

Indice

Manuali Scheda madre popolari di altre marche

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente