DFI CA64-TC Manuale utente

CA64-TC

CA64-TN

Rev. A+

System Board Users Manual

Carte Mère Manuel Pour Ut l sateur

System-Plat ne Benutzerhandbuch

Tablero Electrón co del S stema Manual del Usuar o

49820127

Copyr ght

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Microsoft® MS-DOS®, WindowsTM, Windows® 95, Windows® 98,

Windows® 98 SE, Windows® ME, Windows® 000 and Windows

NT® 4.0 are registered trademarks of Microsoft Corporation. Intel®,

Pentium® III and CeleronTM are registered trademarks of Intel

Corporation. VIA C3 is a registered trademark of VIA Technologies,

Inc. Award is a registered trademark of Award Software, Inc. Other

trademarks and registered trademarks of products appearing in this

manual are the properties of their respective holders.

Caut on

To avoid damage to the system:

 Use the correct AC input voltage range.

To reduce the risk of electric shock:

 Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

 Danger of explosion if battery incorrectly replaced.

 Replace only with the same or equivalent type recommend by

the manufacturer.

 Dispose of used batteries according to the battery

manufacturers instructions.

Joystick or MIDI port:

 Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

 Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

. Shielded interface cables must be used in order to comply with

the emission limits.

Quick Setup Guide



Qu ck Setup

Gu de

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

nglish......................................................................

Chapter 3

Français (French).................................................

Chapter 4

Deutsch (German)................................................

Chapter 5

spañol (Spanish)..................................................

Note:

The users manual in the provided CD contains detailed information

about the system board. If, in some cases, some information doesnt

match those shown in this manual, this manual should always be

regarded as the most updated version.



Quick Setup Guide

Qu ck Setup

Gu de

Chapter 1 - Quick Setup Guide

Table of Contents

1.1 System Board Layout..................................................................................................

1. Jumpers.....................................................................................................................................

1.3 Ports and Connectors................................................................................................

1.4 Award BIOS Setup Utility.......................................................................................

Quick Setup Guide



Qu ck Setup

Gu de

1.1 System Board Layout

CA64-TC

(Supports nboard Audio)



Quick Setup Guide

Qu ck Setup

Gu de

CA64-TN

Note:

The illustrations on the following pages are based on the CA64-TC

system board, which is the board that supports onboard audio.

Quick Setup Guide



Qu ck Setup

Gu de

1.2 Jumpers

1.2.1 Frequency Ratio Settings - SW1

Important:

 The frequency ratio of some processors shown in the table may

have been locked by the manufacturer. If you are using this kind

of processor, setting an extended ratio for the processor will have

no effect. The system will instead use its factor y default ratio.

*** denotes future processors.

700MHz --- 10.5x

--- 4.5x

--- 5x

Processor SW1

66MHz 100MHz

Freq.

Ratio

5.5x

Processor SW1

66MHz 100MHz

Freq.

Ratio

---

6.5x

7.5x

8x---

500MHz

---

133MHz 133MHz

650MHz

700MHz 933MHz

866MHz

800MHz

750MHz 1GHz

800MHz

667MHz

733MHz

---

550MHz

600MHz

---

8.5x

9.5x

10x

11x

566MHz 850MHz

600MHz 900MHz

1.13GHz

1. GHz

1. 6GHz

--- ---

633MHz 950MHz

667MHz ---

***

--- 11.5x

--- 1 x

--- ***

***



Quick Setup Guide

Qu ck Setup

Gu de

 Most processors with frequency ratio greater than 8x have

locked frequency ratio therefore does not have the flexibility of

using extended ratio. If your processor does not have locked

frequency ratio, you can set SW1 according to the desired ratio.

 The processors supported by the system board support VID

(Voltage Identification). The switching voltage regulator on the

system board will automatically set the voltage regulator

according to the voltage of the processor.

1.2.2 CPUs Front Side Bus - JP1 and JP2

Warning:

Some processors, when overclocked, may result to the processors or

systems instability and are not guaranteed to provide better system

performance. If you are unable to boot your system due to

overclocking, make sure to set these jumpers back to their default

settings.

Auto*

66MHz

100MHz

133MHz

JP1

1- On

-3 On

All Off

JP2

1- On

-3 On

All Off

1- On

* denotes default setting

1 3

1- On

1 3

-3 On

All Off

Quick Setup Guide



Qu ck Setup

Gu de

1.2.3 Clear CMOS Data - JP3

-3 On:

Clear CMOS Data

1- On: Normal

(default)

Altri manuali per CA64-TC

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Scheda madre popolari di altre marche

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente