DFI NB71-BC Manuale utente

NB71-BC

NB70-BC

Rev.A+

System Board User’s Manual

Carte Mère Manuel Pour Utilisateur

System-Platine Benutzerhandbuch

Manual del Usuario de Placas Base

935-NB7102-000

61400231

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Windows®98, Windows®98 SE, Windows®ME, Windows®2000

,Windows®XP and Windows NT®4.0 are registered trademarks of

Microsoft Corporation. Intel®and Pentium®4 are registered

trademarks of Intel Corporation.Award is a registered trademark of

Award Software, Inc. Other trademarks and registered trademarks

of products appearing in this manual are the properties of their

respective holders.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.....

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s

instructions.

Joystick or MIDI port:

• Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Quick Setup Guide

Quick Setup

Guide

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

English......................................................................

Chapter 3

Français (French).................................................

Chapter 4

Deutsch (German)................................................

Chapter 5

Español (Spanish)..................................................

Quick Setup Guide

Quick Setup

Guide

Chapter 1 - Quick Setup Guide

Table of Contents

1.1 System Board Layout..................................................................................................

1.2 Jumpers.....................................................................................................................................

1.3 Ports and Connectors................................................................................................

1.4 Award BIOS Setup Utility.......................................................................................

Note:

The user’s manual in the provided CD contains detailed information

about the system board. If, in some cases, some information doesn’t

match those shown in this manual, this manual should always be

regarded as the most updated version.

Quick Setup Guide

Quick Setup

Guide

1.1 System Board Layout

Mouse

USB 1

USB 2

Game/MIDI: CN6

Line-

out

(CN4)

Line-

(CN5)

Mic-

(CN7)

COM 1 (CN1)

Parallel (CN2)

COM 2 (CN3)

Wake-On-KB/Mouse (JP1)

Socket 478 CPU fan

(J3A)

ATX Main

Power

(ATXP1)

System

fan (J8)

FDD

(J18)

Secondary IDE (J11)

Primary IDE (J12)

Battery

Clear CMOS

(JP3)

Firmware

Hub

Wake-On-LAN (J20)

IrDA (J19)

I/O

chip

PCI Standby Power LED

Chassis fan

(J22)

AC’97

Front audio (J16)

+12V power

(ATXP2)

Intel

82845E

MCH

Intel

82801

ICH2

CD-in

(J10)

DIMM

Standby

Power LED

AGP Slot

PCI 1 Slot

PCI 2 Slot

PCI 3 Slot

PCI 4 Slot

PCI 5 Slot

TAD (J14)

Wake-On-

Ring (J15)

DDR SDRAM

DIMM 1

DDR

SDRAM

DIMM 2

USB 3, 4

(J21/J23)

Factory use only (J7)

HD-LED

RESET

SPEAKER

PWR-LED

ATX-SW

G-LED

G-SW

J27

Wake-On-USB 1/2

(JP5)

Wake-On-USB

3/4 (JP4)

CPU FSB select (JP2)

NB71-BC

(Uses the Intel 845E chipset)

Quick Setup Guide

Quick Setup

Guide

Mouse

USB 1

USB 2

Game/MIDI: CN6

Line-

out

(CN4)

Line-

(CN5)

Mic-

(CN7)

COM 1 (CN1)

Parallel (CN2)

COM 2 (CN3)

Wake-On-KB/Mouse (JP1)

Socket 478 CPU fan

(J3A)

ATX Main

Power

(ATXP1)

System

fan (J8)

FDD

(J18)

Secondary IDE (J11)

Primary IDE (J12)

Battery

Clear CMOS

(JP3)

Firmware

Hub

Wake-On-LAN (J20)

IrDA (J19)

I/O

chip

PCI Standby Power LED

Chassis fan

(J22)

AC’97

Front audio (J16)

CPU FSB select (JP2)

+12V power

(ATXP2)

Intel

82845D

MCH

Intel

82801

ICH2

CD-in

(J10)

DIMM

Standby

Power LED

AGP Slot

PCI 1 Slot

PCI 2 Slot

PCI 3 Slot

PCI 4 Slot

PCI 5 Slot

TAD (J14)

Wake-On-

Ring (J15)

DDR SDRAM

DIMM 1

DDR

SDRAM

DIMM 2

USB 3, 4

(J21/J23)

Factory use only (J7)

HD-LED

RESET

SPEAKER

PWR-LED

ATX-SW

G-LED

G-SW

J27

Wake-On-USB 1/2

(JP5)

Wake-On-USB

3/4 (JP4)

NB70-BC

(Uses the Intel 845D chipset)

Quick Setup Guide

Quick Setup

Guide

1.2 Jumpers

1.2.1 Clear CMOS Data - JP3

2-3 On:

Clear CMOS Data

1-2 On:

Normal (default)

1.2.2 Wake-On-Keyboard /Wake-On-Mouse - JP1

1-2 On:

Disable the Wake-On-

KB/Mouse function

(default)

2-3 On:

Enable the Wake-On-

KB/Mouse function

Important:

The 5VSB power source of your power supply must support

≥

720mA.

Clear CMOS

(JP3)

123

Wake-On-

KB/Mouse (JP1)

123

Quick Setup Guide

Quick Setup

Guide

1.2.4 CPU’s Front Side Bus - JP2

2-3 On:

Auto (default)

1-2 On:

100MHz

1.2.3 Wake-On-USB Keyboard - JP5 and JP4

Wake-On-USB 3/4

(JP4)

Wake-On-USB 1/2

(JP5)

123

JP4

JP5

1-2 On: Disable

(default)

123

JP4

JP5

2-3 On: Enable

CPU FSB select

(JP2)

Quick Setup Guide

Quick Setup

Guide

1.2.5 Factory Use Jumper - J7

This jumper is for factory use only. Please leave it in its default setting -

pins 1 and 2 On. Reconfiguring this jumper may cause problems.

Factory use only

(J7)

123

1-2 On (default)

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Scheda madre popolari di altre marche

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente