Digi-Shot Plus CE4 Tagger Manuale utente

DigiShot®Plus CE4 Tagger | UTM-00330 | Rev 5

SVN 34374B | 2019

APPROVER:__________________________________________________________________

2019/01/17

Vinesh Naidoo

yyyy/mm/dd

APPROVED

UTM-00330 |Rev 5

TABLE OF CONTENTS........................................................................................................................................2

1USERS OF THIS MANUAL.............................................................................................6

1.1. PURPOSE OF THIS MANUAL...........................................................................................................................6

1.2. END USER....................................................................................................................................................6

1.2.1. Requirements..................................................................................................................................6

1.3. TRAINING .....................................................................................................................................................6

1.4. INFORMATION...............................................................................................................................................6

1.5. DISCLAIMER.................................................................................................................................................6

2DIGISHOT®PLUS CE4 TAGGER PRODUCT SAFETY.................................................7

2.1. DETNET SAFETY PHILOSOPHY......................................................................................................................7

2.2. USER SAFETY ..............................................................................................................................................7

2.3. PRODUCT SAFETY ........................................................................................................................................7

2.4. TRANSPORTATION,STORAGE AND HANDLING................................................................................................7

2.5. MAINTENANCE SCHEDULE ............................................................................................................................8

2.6. IMPROPER USE.............................................................................................................................................8

2.7. INFORMATION IN CASE OF EMERGENCY..........................................................................................................8

2.8. WARNING,CAUTION,AND NOTE STATEMENTS...............................................................................................9

2.9. RF COMPLIANCE -FCC (USA) AND ICES (CANADA).....................................................................................9

2.9.1. Unauthorised Changes....................................................................................................................9

2.9.2. Radio Interference...........................................................................................................................9

2.9.3. RF Exposure..................................................................................................................................10

2.9.4. FCC Class B digital device notice.................................................................................................10

2.9.5. Labelling Requirements for the Host device .................................................................................10

2.9.6. CAN ICES-3 (B) / NMB-3 (B) ........................................................................................................10

3DIGISHOT®PLUS CE4 TAGGER GENERAL INFORMATION....................................11

3.1. MULTIPLE CHANNEL MODE.........................................................................................................................11

3.2. DIGISHOT®PLUS CE4 TAGGER COMPONENTS ............................................................................................12

3.2.1. Harness wire terminals..................................................................................................................13

3.2.2. Pogo pin connector .......................................................................................................................13

3.2.3. LED’s.............................................................................................................................................13

3.2.4. LCD Screen...................................................................................................................................13

3.2.5. Soft Keys.......................................................................................................................................13

3.2.6. Navigation and Numerical keys ↑↓←→ ........................................................................................13

3.2.7. Enter key .......................................................................................................................................13

3.2.8. Backspace Key..............................................................................................................................13

3.2.9. ESC key.........................................................................................................................................13

3.2.10. ON/OFF key...............................................................................................................................14

UTM-00330 |Rev 5

3.2.11. FN key........................................................................................................................................14

3.2.12. USB connector port ...................................................................................................................14

3.2.13. Battery........................................................................................................................................14

3.2.14. Audio Tones...............................................................................................................................14

3.2.15. Vibration Signals........................................................................................................................14

3.2.16. Visual Signals ............................................................................................................................15

3.2.17. Real Time Clock (RTC) Function...............................................................................................15

3.3. DIGISHOT®PLUS CE4 TAGGER MENU NAVIGATION.....................................................................................16

3.3.1. CE4 Tagger Common User Interface Conventions ......................................................................17

3.4. SYSTEMS NOTIFICATION/QUICK INFO SCREEN..............................................................................................18

4DIGISHOT®PLUS CE4 TAGGER ACCESSORIES......................................................19

4.1. EXTERNAL BATTERY PACK .........................................................................................................................19

4.2. REPLACEABLE TOP CONNECTOR ................................................................................................................20

4.3. SURFACE HARNESS WIRE ..........................................................................................................................20

5DIGISHOT®PLUS CE4 TAGGER BATTERY...............................................................21

5.1. CHARGING THE DIGISHOT®PLUS CE4 TAGGER...........................................................................................21

5.1.1. Low Battery....................................................................................................................................22

5.2. POWER DIGISHOT®PLUS CE4 TAGGER ON AND OFF.................................................................................23

5.2.1. DigiShot®Plus CE4 Tagger Power-ON.........................................................................................23

5.2.2. DigiShot®Plus CE4 Tagger Power-OFF.......................................................................................24

6TAGGING DIGISHOT®PLUS DETONATORS .............................................................25

6.1. NEW DESIGN SCREEN ................................................................................................................................25

6.2. TAG DETONATORS .....................................................................................................................................26

6.3. TAGGING SCREEN SOFT KEY OPTIONS .......................................................................................................28

6.4. RIGHT OR LEFT SIDE DEFINITION.................................................................................................................31

6.4.1. Special detonators.........................................................................................................................32

6.4.2. Row Allocation...............................................................................................................................33

6.4.3. Hole Allocation ..............................................................................................................................34

6.4.4. Decking Allocation.........................................................................................................................35

6.4.5. Automatic Hole Increment and Decrement...................................................................................36

6.4.6. MANUAL TAGGING......................................................................................................................37

6.4.7. AUTO TAGGING...........................................................................................................................37

7TESTING DIGISHOT®PLUS DETONATORS...............................................................38

7.1. TEST ALL IN LIST .......................................................................................................................................38

7.2. TEST ROW .................................................................................................................................................40

7.3. TEST SINGLE DETONATOR..........................................................................................................................42

7.4. AUTOSEARCH.............................................................................................................................................43

7.5. LEAKAGE TEST ..........................................................................................................................................46

7.6. UNTAGGED TEST........................................................................................................................................47

UTM-00330 |Rev 5

7.7. CHECK PATTERN........................................................................................................................................48

8VIEW DESIGN...............................................................................................................50

8.1. VIEW DESIGN SOFT KEY OPTIONS ..............................................................................................................50

8.2. LIST DETONATORS .....................................................................................................................................52

8.3. LIST MISSING DETONATORS ........................................................................................................................53

8.4. LIST NEW DETONATORS .............................................................................................................................54

8.5. LIST BAD STATUS .......................................................................................................................................55

8.6. BLAST SUMMARY .......................................................................................................................................56

8.7. DET TOTALS ..............................................................................................................................................57

9SYSTEM INFORMATION..............................................................................................58

10 CONFIGURATION SETTINGS...................................................................................60

10.1. DIGISHOT®PLUS SETUP.............................................................................................................................60

10.1.1. Autosearch Limits ......................................................................................................................60

10.1.2. Autotag Configuration................................................................................................................61

10.1.3. Extra Information Bar Configuration ..........................................................................................62

10.1.4. Halt on test Configuration..........................................................................................................63

10.1.5. Multiple Channel Configuration..................................................................................................64

10.1.6. Select Channel Configuration....................................................................................................65

10.1.7. Use Starter Dets ........................................................................................................................66

10.2. DEVICE SETUP ...........................................................................................................................................67

10.2.1. Contrast .....................................................................................................................................67

10.2.2. Brightness..................................................................................................................................68

10.2.3. Time Zone..................................................................................................................................69

10.2.4. Timeouts....................................................................................................................................70

10.2.5. Language...................................................................................................................................71

10.3. ADVANCED SETUP......................................................................................................................................72

10.3.1. Tagger ID...................................................................................................................................72

10.3.2. Clear Tags .................................................................................................................................73

10.3.3. Passwords .................................................................................................................................74

10.3.4. Hole Load Mode ........................................................................................................................76

10.3.5. DigiShot Mode ...........................................................................................................................77

10.3.6. Storage Mode ............................................................................................................................78

10.3.7. Read All Det Data......................................................................................................................79

10.3.8. Connecting to PC.......................................................................................................................80

11 TROUBLESHOOTING ...............................................................................................81

11.1. TROUBLESHOOTING DURING TAGGING.........................................................................................................81

11.1.1. Leakage Warning Message.......................................................................................................81

11.1.2. Fail Warning Messages.............................................................................................................81

11.1.3. Warning Messages....................................................................................................................82

Labelled OK.................................................................................................................................................83

11.2. TROUBLESHOOTING DURING TESTING..........................................................................................................84

11.2.1. Untagged Test ...........................................................................................................................84

UTM-00330 |Rev 5

11.2.2. Test Single detonator.................................................................................................................84

11.2.3. Test All/Test Row.......................................................................................................................84

11.3. BASIC CAUSES OF LEAKAGE .......................................................................................................................86

11.4. TROUBLESHOOTING DURING INSTALLATION .................................................................................................87

11.4.1. Binary Search ............................................................................................................................87

11.4.2. High Leakage.............................................................................................................................88

11.4.3. Leakage through conductive materials......................................................................................89

12 SPECIFICATIONS......................................................................................................90

12.1. TEMPERATURE LIMITATIONS .......................................................................................................................90

12.2. BATTERY LIFE............................................................................................................................................90

12.3. STORING THE DIGISHOT®PLUS TAGGER.....................................................................................................90

12.4. CLEANING THE DIGISHOT®PLUS TAGGER...................................................................................................90

12.5. ELECTROSTATIC DISCHARGE,OVER VOLTAGE,OVER CURRENT AND EMP IMMUNITY...................................90

12.6. INHERENT SAFETY......................................................................................................................................90

12.7. SAFETY WARNINGS ....................................................................................................................................91

12.8. MAXIMUM DETS VS LEAKAGE FOR SUCCESSFUL BLASTING ..........................................................................91

UTM-00330 |Rev 5

This manual details the operation of the DigiShot®Plus CE4 Tagger.

Only trained personnel, and personnel found competent, are allowed to operate the system.

Users of the system shall be aware of the recommended procedures for using the DriftShot®BCU

System as per manufacturer’s recommendations.

These recommendations do not supersede the method as required by local mine, explosives or statutory

regulations/procedures/codes of practise regarding the use of detonators. In such cases, the MOST

STRINGENT set of rules between the mine, explosives or local regulations/procedures/codes of practise

and the manufacturer must be followed.

Training and software upgrades shall only be performed by a DetNet SA subject matter expert.

Contact the DetNet head office for additional information.

ALL USERS OPERATING THE DIGISHOT®PLUS CE4 TAGGER SHALL HAVE SUCCESSFULLY

COMPLETED THE SPECIFIC TRAINING BEFORE PERFORMING ANY WORK WITH THE DEVICE(S).

Refer to http://www.detnet.com/ for additional detail and documentation.

This document contains restricted information for company and channel partners’ application only.

Should any of the restricted information contained in this document be disclosed to any third party either

intentionally or unintentionally, DetNet South Africa will not be held responsible, accountable or liable for any

resulting event and or issue.

This manual is only to be used for the DigiShot®Plus CE4 Tagger and the applicable

software version as displayed.

UTM-00330 |Rev 5

DetNet safety philosophy is to design, manufacture and provide control equipment, detonators and

accessories to the highest safety standards.

SmartKeys to remain in possession of the accountable person, and should only be used to complete

the blast circuit at such a time as stipulated by the Mine after completion of the required Risk

Assessment.

All products must conform to local and international standards before it is sold for use

DetNet complies to ISO 9001, SANS 551:2009, CEN/TS 13763-27 which is acceptable to countries we

operate in; in countries not subscribing to the above marks, we advise users to engage with DetNet to

ensure that all equipment comply to local regulations.

Safety is ensured when the user supplements the product’s in-built safety systems through adequate training

in the safe use of the product:

Induction training

Refresher training

DetNet continuously upgrades software to make our products more user friendly and to ensure that users stay

abreast on latest developments, it is important that users get trained on the relevant changes before their

equipment is updated.

CE4 DigiShot®Plus CE4 Tagger is “Inherently Safe” as it cannot produce the necessary minimum

required firing voltage to blast the electronic DigiShot®Plus detonator.

In addition, the DigiShot®Plus CE4 Tagger is not equipped to produce the “fire signal” necessary to

initiate the detonator.

THE DIGISHOT®PLUS CE4 TAGGER MUST NEVER BE CONNECTED TO A N

ORMAL ELECTRIC

DETONATOR AND SHOULD NEVER BE CONNECTED TO DETONATORS WHILE BEING CHARGED.

DigiShot®Plus CE4 Tagger equipment must be transported, stored, handled and used in conformity with all

federal, state, provincial and local laws and regulations. Control equipment and accessories should be

handled with due care and not dropped, mishandled, subjected to excessive vibration or exposed to any

chemical agents. Connectors should be kept clean and the equipment must be kept in a safe environment to

avoid misappropriation or misuse.

ELECTRONIC DETONATORS ARE TOTALLY DIFFERENT TO CONVENTIONAL ELECTRIC DETONATORS AND

ABSOLUTELY NO CONNECTION WITH CONVENTIONAL ELECTRIC DETONATO

RS OR ANY OTHER

ELECTRONIC DETONATORS IS POSSIBLE AS IT CAN LEAD TO UNINTENDED INITIATION.ALL USERS

OPERATING THE ELECTRONIC INITIATION SYSTEM SHALL HAVE SUCCESSFULLY COMPLETED THE

SPECIFIC TRAINING BEFORE PERFORMING ANY WORK WITH THE DEVICE(S). DO NOT USE ANY DEVICES

OTHER THAN THOSE SPECIALLY DESIGNED FOR THIS TYPE OF ELECTRONIC DETONATOR.

UTM-00330 |Rev 5

All equipment in the field will need to be returned to DetNet, or its repair centres, for service at the following

intervals:

Handheld Equipment (Tagger, etc.) – 18 Months.

Other equipment (Excluding accessories) – 24 Months.

Do not apply undue pressure to the LCD screen as this could damage or cause a malfunction.

Should the LCD screen break, care should be taken to avoid injury from broken glass and to prevent

liquid crystal from the screen touching the skin or entering the eyes or mouth.

Batteries may leak or explode if incorrectly handled.

Only use batteries approved for use in the DigiShot®UG Tagger.

Do not expose the battery to an open flame or excessive heat.

Replacing external batteries in the battery pack must be performed in a safe and dry place so as to

prevent ingress of moisture or condensation into the battery pack enclosure.

Refer to http://www.detnet.com/ for additional detail and documentation.

CE4 Taggers have sealed batteries, only the external battery pack, which is an optional

extra, has removable batteries.

UTM-00330 |Rev 5

WARNING, CAUTION, and NOTE statements are used throughout this manual to emphasise important and

critical information. Observe these statements to ensure safety and to prevent product damage. The

statements are defined as follows:

AWARNING MEANS THAT INJURY OR DEATH IS POSSIBLE IF THE INSTRUCTIONS ARE NOT OBEYED.

Warnings draw special attention to anything that could injure or kill the reader/user. Warnings are generally

placed before the step in the procedure they relate to. Warning messages are repeated wherever they apply.

ACAUTION MEANS THAT DAMAGE TO EQUIPMENT IS POSSIBLE.

Cautions draw special attention to anything that could damage equipment or cause the loss of data and will

normally describe what could happen if the caution is ignored. Cautions are generally placed before the step

in the procedure they relate to.

Notes are used to emphasise important information by visually distinguishing this from the rest of the text.

Notes can contain any type of information except safety information, which is always placed in cautions or

warnings.

Refer to http://www.detnet.com/ for additional detail and documentation.

DetNet South Africa has not approved any changes or modifications to this device by the user. Any changes

or modifications could void the user’s authority to operate the equipment.

DetNet South Africa n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la

nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur.

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de

brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Notes are added to provide additional information.

UTM-00330 |Rev 5

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.

The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your

body. Antenna gain must be below 30 dBm

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC pour un environnement non

contrôlé. L'antenne doit être installé de façon à garder une distance minimale de 20 centimètres entre la

source de rayonnements et votre corps. Gain de l'antenne doit être ci-dessous 30dBm

L'émetteur ne doit pas être colocalisé ni fonctionner conjointement avec à autre antenne ou autre émetteur.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

The host device shall be properly labelled to identify the modules within the host device. The certification label

of the module shall be clearly visible at all times when installed in the host device, otherwise the host device

must be labelled to display the FCC ID and IC of the module, preceded by the words "Contains transmitter

module", or the word "Contains", or similar wording expressing the same meaning, as follows:

Contains FCC ID: 2ARNH-16541610 (V4 hardware)

2ARNH-13631680 (V3 hardware)

L'appareil hôte doit être étiqueté comme il faut pour permettre l'identification des modules qui s'y trouvent.

L'étiquette de certification du module donné doit être posée sur l'appareil hôte à un endroit bien en vue en tout

temps. En l'absence d'étiquette, l'appareil hôte doit porter une étiquette donnant le FCC ID et le IC du module,

précédé des mots « Contient un module d'émission », du mot « Contient » ou d'une formulation similaire

exprimant le même sens, comme suit:

Contains IC: 24476- 16541610 (V4 Hardware)

24476-13631680 (V3 hardware)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003.

Indice

Altri manuali Digi-Shot Apparecchiature di prova

Digi-Shot

Digi-Shot plus.4G Manuale utente

Digi-Shot

Digi-Shot UTM-00343 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente