UTM-00343 |Rev 1
Page | 9
Site Setup
Main Menu
Press SoftKey to select Configuration Settings.
Press to select 4G Setup
Press to select Site Setup
Site Setup screen for each tagging mode
Use Markers: When this item is enabled (Black filled
rectangle), the tagging screen will contain a soft key to
allow marking and tagging a detonator at the same
time.
Autotag: If this option is disabled (White filled
rectangle), tagging can only be performed on the pogo
pins, and not by connecting a detonator onto the
harness wire (It is not practical to connect and then
remove the detonator from the harness wires).
Multi Commander: allows the user to load blast designs
for multiple commanders up to 16 000 dets
Multi-Primed: Enables setting of multiple dets per shot
hole.
Assign Locations: Allows for tagging locations without
timing to detonators
List Hole Config: Setting of decks and dets per deck.
Det Label: Configures how locations is tagged to
detonators i.e. numerical or Alfa-numerical.
Delete ViewShot: Clears ViewShot Plan in Planned
mode.
