Digital Watchdog DW-BJP1U-LX Manuale utente

State of the art hyper-optimized video management platform designed for ease, speed and eciency.

Blackjack®P-Rack™ — Up to 600Mbps.

Linux OS Windows OS

DW-BJP1U-LX DW-BJP2U-LX DW-BJPR2U-LX DW-BJP1U DW-BJP2U DW-BJPR2U

Quick Start Guide

WHAT’S IN THE BOX

P-Rack™ server 1Keyboard

and mouse 1 set Rail kit 1 set

Quick start

guide 1Power cable 1 set

DW-BJP1U-LX

DW-BJP1U

DW-BJP2U-LX

DW-BJP2U

DW-BJPR2U-LX

DW-BJPR2U

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday

digital-watchdog.com

Attention: This document is intended to serve as a quick reference for initial setup.

See the DW Spectrum® IPVMS full manual for more information on features and functionality.

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/support-download/.

2. Search your product by entering the part number in the ‘Search by Product’ search bar.

Results for applicable part numbers will populate automatically based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals, Quick Start Guides (QSG), software and

ﬁrmware will appear in the results.

Default Login Information for DW Spectrum® IPVMS

Username: admin Password: admin12345

Default login information for the server’s OS

Username: dwuser Password: Dw5pectrum

B1 Power output

B2 Keyboard port (PS2 type)

B3 USB 2.0 ports

B4 VGA output (disabled)

B5 DVI-D output (disabled)

B6 True HD output (disabled)

B7 Network ports

B8 USB 3.0 ports

B9 Optical digital audio output

B10 Audio ports

B11 RAID* (DW-BPR2U models

only)

B12 DVI-I output

B13 True HD output

F1 2x USB 2.0 ports

F2 Power button

F3 HDD status LED

B3B8

B6 B11B9 B12

B13

B10B5

B2 B7

F1 F2 F3

MODEL Blackjack® P-Rack™ 1U Blackjack® P-Rack™ 2U Blackjack® P-Rack™ 2U w/RAID

Included IP licenses 4 4

Form factor Rack-mount Rack-mount

Operating

system

Windows®10 DW-BJP1UXT DW-BJP2UXT DW-BJPR2UXXT

Linux®Ubuntu®DW-BJP1UXT-LX DW-BJP2UXT-LX DW-BJPR2UXXT-LX

OS on SSD Option: DW-SSD – spare SSD for mirroring OS *

CPU Intel® Core™ i5® processor Intel® Core™ i7® processor

Option: DW-CPUI7 - upgrade processor to i7 *

Memory 16GB

NIC 2x gigabit Ethernet (RJ45) 2x gigabit Ethernet (RJ45)

Option: DW-R2NIC - upgrade dual 1GB NIC card OR DW-R4NIC - upgrade quad 1GB NIC card *

System Max video storage rate (Mbps) 360 Mbps 600 Mbps

Storage Maximum hard drives 1 x SSD + 3 x HDD 2 x SSD + 6 x HDD 6 x HDD

Maximum storage 30TB 70TB 50TB RAID 5

Video-out

Outputs True HD output or VGA or DVI

Video card GeForce 210 512MB

Resolution HD 1080p

Preloaded VMS software DW Spectrum® IPVMS

Unlimited remote clients Cross platform - Windows®, Linux®and Mac®

Mobile apps iOS®and Android®

Keyboard and mouse Included

Rail-kit Included

Power 300W ** 400W **

Operating temperature and humidity 41°F-104°F / 20-90% RH

Dimension (WxDxH) (inches) 17.25" x 20.85" x 1.75" 17.32" x 26" x 3.5" 17.32" x 26" x 19"

Warranty 5 year limited

Front 1U models

Back 1U models

Front 2U models

Back 2U models

BLACKJACK® P-RACK™ HARDWARE

SPECIFICATIONS

B3 B3B8

B6 B9

B12 B13

B10

* Available at time of initial order only / ** UPS recommended

Speciﬁcations and components mentioned are subject to change without notice.

Default login information for DW Spectrum® IPVMS

Username: admin Password: admin12345

Default Login Information for the server’s OS

Username: dwuser Password: Dw5pectrum

240GB SSD 240GB SSD 240GB SSD

240

SETTING UP THE SERVER

STEP 1: Connect external devices, power and network.

1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B7 on the diagram).

Conﬁgure the camera’s network ﬁrst, then conﬁgure the server’s local network.

2. Connect the server to an appropriate power source. It is recommended to use a UPS system.

* Recommended to use 750VA or higher for the 1U P-RACK and 1000VA or higher for the 2U P-RACK

3. Power up the server if the server does not turn on automatically by pressing the power button on the front of the

server. (F2 on the diagram).

* Connecting the power cable to the live power source may turn on the server automatically.

STEP 2: Conﬁgure date and time

Windows®

1. Double-click on the date and time icon on the desktop.

2. Change time zone if it is not correct (default is UTC-08:00 Paciﬁc Time).

SETTING UP THE E-RACK

STEP 1: Connect Peripherals, power and network

1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the camera network first

then will configure local network later.

2. Connect the server to an appropriate power source. Recommend to use UPS system

*recommend to use 3000VA or higher.

3. Turn on the server if the server does not turn on automatically.

(Press the Power Button on the front of the P-RACK. F2 on the diagram).

* Connecting the power cable to the live power source may turn on the serverautomatically

STEP 2: Configure Date and Time

Windows

1. Double click Date and Time icon on the Desktop.

2. Change Time zone if not correct (default is UTC-08:00 Pacific Time)

Press OK after selecting the correct Time zone.

Click Change date and time… to update the date and time if they are not correct.

* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.

Quick Start Guide

POE Switch for cameras

Press OK after adjusting to the correct date and/or time.

4. Press OK to close Date and Time when done.

Linux

1. Update Date and Time by clicking on the time on the upper right-hand corner then click “Time & Date settings…”

2. If the server will be connected to the Internet, leave Set the Time to “Automatically from the Internet” and update the Location to the correct

Time Zone. Enter the nearest major city to select the correct Time Zone. If it shows multiple cities in the list, select the correct city. (e.g.,

New York for EST, Chicago for CST, Denver for MST, and Los Angeles for PST)

Press OK after selecting the correct time zone.

Click “Change date and time…” to update the date and time if they are not correct.

* Verify the time zone before updating the date and time. Time may show 2 or 3 hours o due to incorrect

time zone.

SETTING UP THE E-RACK

STEP 1: Connect Peripherals, power and network

1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the camera network first

then will configure local network later.

2. Connect the server to an appropriate power source. Recommend to use UPS system

*recommend to use 3000VA or higher.

3. Turn on the server if the server does not turn on automatically.

(Press the Power Button on the front of the P-RACK. F2 on the diagram).

* Connecting the power cable to the live power source may turn on the serverautomatically

STEP 2: Configure Date and Time

Windows

1. Double click Date and Time icon on the Desktop.

2. Change Time zone if not correct (default is UTC-08:00 Pacific Time)

Press OK after selecting the correct Time zone.

Click Change date and time… to update the date and time if they are not correct.

* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.

SETTING UP THE E-RACK

STEP 1: Connect Peripherals, power and network

1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the camera network first

then will configure local network later.

2. Connect the server to an appropriate power source. Recommend to use UPS system

*recommend to use 3000VA or higher.

3. Turn on the server if the server does not turn on automatically.

(Press the Power Button on the front of the P-RACK. F2 on the diagram).

* Connecting the power cable to the live power source may turn on the serverautomatically

STEP 2: Configure Date and Time

Windows

1. Double click Date and Time icon on the Desktop.

2. Change Time zone if not correct (default is UTC-08:00 Pacific Time)

Press OK after selecting the correct Time zone.

Click Change date and time… to update the date and time if they are not correct.

* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.

Press OK after adjusting to the correct date and/or time.

4. Press OK to close the date and time when done.

Linux®

1. Open Settings

Quick Start Guide

3. Click Date &Time

2. Click Details

4. Turn OFF Automatic Date & Time and Automatic Time Zone

5. Click Date & Time and set correct date and time

6. Click Time Zone and set to correct Time zone. (type one of the largest cities in the time zone)

7. Close Settings.

STEP 3: Conﬁgure network

Please have the following information ready before starting the network conﬁguration.

1. Double click on “Network Connections” on the desktop.

2. Right click on the Ethernet with cable connected and click “Properties”.

Windows®

* Camera network and local network cannot be on the same network.

Camera network Local network (LAN)

IP address

Subnet mask / Netmask

Default gateway / Gateway Not applicable

DNS servers Not applicable

NOTE The Blackjack® server’s network settings are set to DHCP as default.

NOTE If you are not sure what information to enter, contact your Network Administrator or Internet

Service Provider for the information.

3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)

5. Enter IP address and Subnet mask of the camera network. (do not enter anything for the Default gateway, Preferred DNS server and Alternate

DNS server.

NOTE It must be the same network as the cameras and must not be the same network as the local network.

Contact your network administrator for more information.

3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)

5. Enter IP address and Subnet mask of the camera network. (do not enter anything for the Default gateway, Preferred DNS server and Alternate

DNS server.

NOTE It must be the same network as the cameras and must not be the same network as the local network.

Contact your network administrator for more information.

3. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.

3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)

5. Enter IP address and Subnet mask of the camera network. (do not enter anything for the Default gateway, Preferred DNS server and Alternate

DNS server.

NOTE It must be the same network as the cameras and must not be the same network as the local network.

Contact your network administrator for more information.

Quick Start Guide

4. Select “Use the following IP address” (Use the following DNS server addresses will be selected automatically).

5. Enter IP address and Subnet mask of the camera network. (Do not enter anything for the default gateway, preferred

DNS server and alternate DNS server.

NOTE It must be the same network as the cameras and must not be the same network as the local

network. Contact your network administrator for more information.

6. Click OK to close then click Close to go back to Network Connections.

Local Network

7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.

8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)

10. Enter IP address and Subnet mask of the camera network.

6. Click OK to close then click Close to go back to Network Connections.

Local Network

7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.

8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)

10. Enter IP address and Subnet mask of the camera network.

6. Click OK to close then click Close to go back to Network Connections.

Local Network

7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.

8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties

9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)

10. Enter IP address and Subnet mask of the camera network.

6. Click OK to close then click close to go back to network connections.

Local Network

7. Right-click on the other Ethernet, the one with network cable unplugged, and click “Properties”.

8. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.

9. Select “Use the following IP address” (Use the following DNS server addresses will be selected automatically).

10. Enter IP address and subnet mask of the camera network.

* Consult with your IT department if you do not know what IP address to use.

11. Click OK to close then click Close to go back to Network Connections.

12. Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.

13. Close the Network Connections by clicking X on the upper right corner of Network Connections.

Linux

1. Double-click the Network icon on the Desktop

2. Select ‘Wired’ that has arrows pointing up and down from the list (If neither of the “wired” are showing arrows up and downs, then make

sure the network cable is connected to the PoE switch on the camera network from STEP 1)

3. Click ‘Options’ at the bottom of the window.

4. Click on the ‘IPv4 Settings’ tab.

5. From the drop-down menu, select connection type (“Method”) as Manual.

6. Click ‘Add’ next to Addresses.

NOTE The Blackjack Cube’s network settings are set to DHCP as default.

* Consult with your IT department if you do not know what IP address to use.

11. Click OK to close then click Close to go back to Network Connections.

12. Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.

13. Close the Network Connections by clicking X on the upper right corner of Network Connections.

Linux

1. Double-click the Network icon on the Desktop

2. Select ‘Wired’ that has arrows pointing up and down from the list (If neither of the “wired” are showing arrows up and downs, then make

sure the network cable is connected to the PoE switch on the camera network from STEP 1)

3. Click ‘Options’ at the bottom of the window.

4. Click on the ‘IPv4 Settings’ tab.

5. From the drop-down menu, select connection type (“Method”) as Manual.

6. Click ‘Add’ next to Addresses.

NOTE The Blackjack Cube’s network settings are set to DHCP as default.

11. Click OK to close then click close to go back to network connections.

12. Connect a network cable to the Ethernet port B7 on the diagram (page 2) to the switch on the local network.

13. Close the network connections dialog.

Linux®

1. Open Settings

2. Open Network

Quick Start Guide

NOTE If you are not connecting to the Blackjack®from the same network, you may be required to perform

port forwarding on your router to access the server. Contact your Network Administrator or Installer for

additional information

3. Click Setting of the Ethernet that is Connected

9. Click Apply to save

10. Connect the network cable and verify the connection.

7. Click Settings of the Ethernet not connected.

6. Restart the connection by switching OFF then turn ON.

5. Click Apply to save

8. Change to Manual then enter Address, Netmask, Gateway then DNS.

4. Change to Manual then enter Address, Netmask , Gateway.

* Do not enter Gateway information if there is no Gateway in this network.

OPTION 1: Double-click the DW Spectrum®

desktop icon.

OPTION 2: Go to ‘Start’

on the bottom left and

select DW Spectrum®

in the Digital Watchdog

folder

WINDOWS-BASED SOFTWARE MANUAL LAUNCH

To launch the DW Spectrum® software on the Windows-based E-RACK:

Configure Cameras using DW IP Finder

Refer to the camera’s QSG to configure Digital Watchdog camera’s IP address using DW IP finder.

Spectrum Client

OPTION 2: Go to the dashboard on the top left side.

Search ‘DW’. Click the DW icon.

LINUX-BASED SOFTWARE MANUAL LAUNCH

To launch the DW Spectrum®

Software on the Linux-Based Cube:

Linux OS OPTION 1: Double-click the DW Spectrum

desktop icon.

OPTION 2: Go to ‘Start’ on

the bottom left and select

DW Spectrum

® in the

Digital Watchdog folder

WINDOWS-BASED SOFTWARE MANUAL LAUNCH

To launch the DW Spectrum®

Software on the Windows-Based Cube:

Windows OPTION 1: Double-click the DW Spectrum

desktop icon.

Windows

Password: admin12345

SETTING UP DW SPECTRUM® MEDIA SERVER

CONFIGURE CAMERAS USING DW® IP FINDER™

Refer to the camera’s QSG to conﬁgure any DW® IP camera’s IP address using DW®IP ﬁnder™.

DW Spectrum® IPVMS client

LINUX-BASED SOFTWARE MANUAL LAUNCH

To launch the DW Spectrum® software on the Linux-based E-RACK

OPTION 1: Double-click the DW Spectrum®

desktop icon.

OPTION 2: Go to the dashboard on the top

left side. Search ‘DW’. Click the DW icon.

Linux OS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Digital Watchdog Server

Digital Watchdog

Digital Watchdog Blackjack Tower DW-BJST51T Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack S-RACK 1U Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Ai DW-BJAiP64TR Manuale utente

Digital Watchdog

Digital Watchdog Blackjack BOLT DW-BJBOLT2T-LX Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Ai DW-BJAI2R T Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Tower Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Tower DW-BJT71xxT/LX Manuale utente

Digital Watchdog

Digital Watchdog Blackjack DW-BJRR2U T Series Manuale utente

Digital Watchdog

Digital Watchdog DW-BJER3U Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Ai DW-BJAiMT T Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Tower DW-BJT71 T/LX Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack X-Rack Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Ai DW-BJAiT TR Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Tower DW-BJMT31 T/LX Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Cube-LX Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack E-Rack Series Manuale utente

Digital Watchdog

Digital Watchdog BlackJack CUBE Manuale utente

Digital Watchdog

Digital Watchdog Blackjack C2P Manuale utente

Digital Watchdog

Digital Watchdog Blackjack Ai Manuale utente

Digital Watchdog

Digital Watchdog Blackjack bolt DW-BJB0LT2T-LX Manuale utente

Digital Watchdog

Digital Watchdog Blackjack DX DW-BJDX11 T-LX Series Manuale utente

Digital Watchdog

Digital Watchdog Blackjack DW-BJER4U-LX Manuale utente

Digital Watchdog

Digital Watchdog DW-BJER4U Manuale utente

Digital Watchdog

Digital Watchdog DW-BJER2U Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente