Digitus DN-70230 Manuale utente
NAS SERVER
FOR EXTERNAL HDD
Quick Installation Guide
DN-70230
System requirement
Operating system and software: Windows 2000, XP, 2003, Vista, Mac OS X or above, Linux
Required hardware resources:
10/100 base-TX Auto MDI/MDI-X LAN
USB 2.0 External HD
USB cable
Hardware installation
Connecting the NAS Adapter:
1. Turn off power of the external HD enclosure.
2. Connect the external HD enclosure to the USB port of the rear of the NAS adapter.
3. Turn on power of the external HD enclosure.
4. Connect the AC power adapter cord to the power port to the front of the NAS adapter.
5. Connect the other end of the AC power adapter cord to an electric outlet.
6. Connect the twisted-pair cable to the front of the NAS adapter and the other end of the cable to
the router.
Utility Installation
The utility is used to find the NAS adapter in your network.
Please double click "Utility Installation" to start the installation steps as follow:
Follow the instructions of the setup program to install the utility on your computer.
Managing Your Device
Prepare Your Computer to Connect USB Media Adapter
1. Please make sure your computer supports the JAVA environment. If not, you can go to
http://java.com to download and install the JAVA software.
2. Double click the Server Search Tool to search the NAS adapter from your network
environment, and then click Connect.
Please enter default username and password: admin.
Note:
Please setup the fixed IP after you login the system. Please refer to section "Setup > TCP/IP"
for further information.
Status of USB Media Adapter
After logging in, user may find the current system and TCP/IP information by clicking on “Status”.
System Information:
It provides system and disk information. System information includes the basic information such as
Host Name, Group Name, Firmware version, MAC Address and Date/Time.
Disk Information:
It provides the information of attached HDD such as device name, free size and total size.
TCP/IP Information
TCP/IP provides current TCP/IP settings and information. The Status of DHCP, IP address, Subnet
Mask, Gateway, Primary DNS, Secondary DNS setting will be shown here.
Setup Your USB Media Adapter
Before attaching you external HDD, please check the following items:
1. USB Media Adapter can recognize only the partition in FAT 32, maximum single file size is
127GB.
2. If your external HDD is not FAT 32 format, please use the disk utility in “Service > Disk Utility”
to format your HDD into FAT 32.
3. If your external HDD contains one FAT 32 partition already, formatting HDD could be
unnecessary.
Note: Formatting HDD will cause data lost.
Format your External HDD
Attached and Format your HDD At first Time Setup
Please attach your USB external HDD to the USB port of USB Media Adapter.
Log-in USB Media Adapter and check the “Disk information” in System to see if the external HDD is
recognized successfully.
Format your External HDD
If the external HDD is recognized correctly, please go to Services > Disk Utility and click on Format
to process. Formatting time depends on the size of the external HDD. It takes 2 to 5 minutes in
general.
Format Finished
After finish formatting, a new webpage will be redirected and shows “Format successfully!”
Setting your USB Media Adapter
Before setting your USB Media Adapter, please check the following items:
1. “Group Name”, “Subnet Mask”, “Gateway” need to be set as the same as your local network. If
the setting is different, your USB Media Adapter is not able to be found on local network.
2. Host Name will be shown in “workgroup Computers”.
3. Setting a fixed IP for USB Media Adapter is highly recommended. The IP of USB Media
Adapter MUST in the same segment with local LAN. For example, if the local LAN IP is at
192.168.1.x, the IP of USB Media Adapter also has to be 192.168.1.x
(x=available IP from 1 to 253)
System Settings
Host Name: The name you want to be shown in local LAN.
Group Name: The workgroup that you would like to join. By Windows are generally “MSHOME” or
“Workgroup”
Tips: You may reference the subnet Mask, Gateway, Primary DNS and secondary DNS setting in
your Computer. Those information could be found at Control Panel>Network>TCP/IP
Altri manuali per DN-70230
1
Indice
Altri manuali Digitus Server
Digitus
Digitus DN-13010 Manuale utente
Digitus
Digitus DN-13014-3 Manuale utente
Digitus
Digitus DN-13020 Manuale utente
Digitus
Digitus DN-13014-1 Manuale utente
Digitus
Digitus WIRELESS 300N AUTO INSTALLATION USB ADAPTER Manuale utente
Digitus
Digitus DN-13007 Manuale utente
Digitus
Digitus DN-16100-1 Manuale utente
Digitus
Digitus DN-16100-1 Manuale utente
Digitus
Digitus DN-16100-2 Manuale utente
Digitus
Digitus DN-16100 Manuale utente
