
Operational Instruction
Install the 9v battery that is supplied into the
battery compartment.
To active the Microwave Leakage Detector, just
press the power on button. If required and to adjust
the detectors display to zero, press and hold the
back-light /zero button until the displayed reading
indicates a zero.
You may then begin to take your microwave
leakage measurements. To power off the
instrument, press the power button again.
MICROWAVE LEAKAGE METER
According to a survey done by professional
service associates, 56% of microwave ovens used
for more then 2 years can possibly leak levels of
radiation 10% higher than the safety standard of
5mW/cm2 regulated by the FDA and EPA. It will
be vulnerable and uncomfortable for people if
the microwave radiation exposure level exceeds
5mW/cm2.
Microwave radiation is odorless and
invisible .its leakage can
be caused by
2
etc. How to keep people from this