DMP Electronics 714N-POE Guida all'installazione

INSTALLATION AND PROGRAMMING GUIDE

714N-POE Network

Zone Expander Module

Table of Contents .......................................a

About the 714N-POE.................................. 1

Power Supply......................................................... 1

Zone Terminals ...................................................... 1

Programming Connection................................. 1

PCB Features...............................................2

Install the 714N-POE Module....................3

Mount the Device ................................................ 3

Network Connection.......................................... 4

Wire the Zone Terminals................................... 5

Addressing the 714N-POE ............................... 6

Program the 714N-POE Module ...............8

Program Start Display ....................................... 9

Initialization Option ............................................ 9

Initialize Conﬁrm Option .................................. 9

Communication Menu........................................ 9

TABLE OF CONTENTS

714N DHCP............................................................10

714N IP Address..................................................10

Subnet Mask.........................................................10

Gateway Address ...............................................10

Panel IP Address.................................................10

Panel IP Port..........................................................11

714N-POE Passphrase .......................................11

714N-POE Network Speciﬁcations ........ 12

Compliance Listing Speciﬁcations ........ 13

Certiﬁcations............................................. 14

Underwriters Laboratory (UL Listed).........14

Product Speciﬁcations ............................ 15

Digital Monitoring Products, Inc. | 714N-POE Installation and Programming Guide 1

PROGRAMMING CONNECTION

The module also provides a keypad programming

connection for use with a standard DMP LCD

keypad for initial setup. Programming can be

completed using a keypad connected to the

module or from XR150/XR550 panels.

The 714N-POE Network Zone Expander Module allow you to add 4 zones to XR150/XR550 Series

panels using IP network capability. The 714N-POE is compatible with 1k to 10k resistors, giving a wide

variety of options for takeovers.

POWER SUPPLY

714N-POE module operates at 12 VDC from

a power supply. The 714N-POE can also be

powered from POE.

ZONE TERMINALS

Four input zones are provided to allow

connection of nearby burglary devices.

ABOUT THE 714N-POE

2 714N-POE Installation and Programming Guide | Digital Monitoring Products, Inc.

PCB FEATURES

DC INPUT

ZONES

INDICATOR

LEDS

Figure 1: PCB Features

POWER OUTPUT

Digital Monitoring Products, Inc. | 714N-POE Installation and Programming Guide 3

INSTALL THE 714N-POE MODULE

The module comes in a high-impact plastic housing that you can mount directly to a wall, backboard,

or other ﬂat surface.

For easy installation, the back and ends of the housing have wire entrances. The back also contains

multiple mounting holes that allow you to mount the module on a single-gang switch box.

1. Remove the circuit board from the plastic housing by loosening the clips on one side and gently

lifting it out of the housing base.

2. Use the included screws in the desired mounting hole locations to attach the remote module to

the surface. See the shaded mounting hole locations in Figure 2.

3. Reinstall the circuit board in the housing base.

MOUNT THE DEVICE

Mounting Hole

Figure 2: Mounting Hole Locations

4 714N-POE Installation and Programming Guide | Digital Monitoring Products, Inc.

Connect an IP network cable from the LAN/WAN connection to the 714N-POE Network connector.

The 714N-POE module communicates AES encrypted TCP with panels that have network installed.

Two LED’s are located on the ethernet jack.

• The green LED indicates data sent to the panel.

• The yellow LED indicates the speed of the transmission. A solid yellow LED indicates

the network is connected at 100 Base-T. A ﬂashing yellow LED indicates the network is

connected at 10 Base-T.

NETWORK CONNECTION

Digital Monitoring Products, Inc. | 714N-POE Installation and Programming Guide 5

WIRE THE ZONE TERMINALS

Terminals 5-9 connect grounded zones 1 through 3. Zone 4 terminals provide a non-powered Class

B, Style A zone. The valid range of EOL resistors is 1k to 10k, allowing for a wider range of takeovers.

Refer to the panel programming guide for programming instructions. See Figure 2 for more

information on wiring the zone terminals.

Figure 2: Zone Terminal Wiring

Zone 1

Zone 2

Zone 3

Zone 4

EOL

1234 5 6 7 810 11

6 714N-POE Installation and Programming Guide | Digital Monitoring Products, Inc.

ADDRESSING THE 714N-POE

Note: For XR Series Version 192 ﬁrmware and lower, the 714N-POE must be programmed as a

network door. In Version 193 ﬁrmware and higher, the 714N-POE should be programmed as a

network expander. Refer to the XR Series panel programming guide (LT-1232) as needed.

Keypad Bus Addresses

DMP XR150/XR550 Series panels use keypad bus addresses 1 through 16. Each keypad bus address

can accommodate one 714N-POE. A module with an address of 2 on the keypad bus would represent

Door 2 and zones 21-24. A module with a keypad address of 14 would represent Door 14 and zones

141-144.

AX-Bus Addresses (XR550 only)

DMP XR550 panels are capable of access control expansion using any of the ﬁve AX/LX-Bus headers

(AX/LX500, 600, 700, 800, and 900). The 714N-POE takes up an AX-Bus address that can no longer

be used for a door. The 714N-POE module shares AX-bus addresses with the 734N, which limits the

number of devices to 16. A module with an address of 501 on AX500 would represent zones 501-504.

A module with an address of 505 on AX500 would represent zones 505-508. A module with an

address of 701 on AX700 would represent zones 701-704.

Digital Monitoring Products, Inc. | 714N-POE Installation and Programming Guide 7

Setting the 714N-POE Addresses

Only valid zone numbers can be assigned 714N-POE in device setup. For complete keypad and AX-

Bus address mapping, see the chart below.

Table 1: Device Addresses and 714N-POE

Zone Numbers

DEVICE ZONES DEVICE ZONES DEVICE ZONES DEVICE ZONES DEVICE ZONES DEVICE ZONES

1 11-14 501 501-504 601 601-604 701 701-704 801 801-804 901 901-904

2 21-24 505 505-508 605 605-608 705 705-708 805 805-808 905 905-908

3 31-34 509 509-512 609 609-612 709 709-712 809 809-812 909 909-912

4 41-44 513 513-516 613 613-616 713 713-716 813 813-816 913 913-916

5 51-54 517 517-520 617 617-620 717 717-720 817 817-820 917 917-920

6 61-64 521 521-524 621 621-624 721 721-724 821 821-824 921 921-924

771-74 525 525-528 625 625-628 725 725-728 825 825-828 925 925-928

8 81-84 529 529-532 629 629-632 729 729-732 829 829-832 929 929-932

9 91-94 533 533-536 633 633-636 733 733-736 833 833-836 933 933-936

10 101-104 537 537-540 637 637-640 737 737-740 837 837-840 937 937-940

11 111-114 541 541-544 641 641-644 741 741-744 841 841-844 941 941-944

12 121-124 545 545-548 645 645-648 745 745-748 845 845-848 945 945-948

13 131-134 549 549-552 649 649-652 749 749-752 849 849-852 949 949-952

14 141-144 553 553-556 653 653-656 753 753-756 853 853-856 953 953-956

15 151-154 557 557-560 657 657-660 757 757-760 857 857-860 957 957-960

16 161-164 561 561-564 661 661-664 761 761-764 861 861-864 961 961-964

Indice

Altri manuali DMP Electronics Unità di controllo

DMP Electronics

DMP Electronics 861 Manuale utente

DMP Electronics

DMP Electronics 1116 Manuale utente

DMP Electronics

DMP Electronics 1134 Guida all'installazione

DMP Electronics

DMP Electronics 734N Series Guida all'installazione

DMP Electronics

DMP Electronics 714-D22 Manuale utente

DMP Electronics

DMP Electronics Wiegand 734N Guida all'installazione

DMP Electronics

DMP Electronics 734B Guida all'installazione

DMP Electronics

DMP Electronics 711S Manuale utente

DMP Electronics

DMP Electronics RoBoard RM-G144 Manuale utente

DMP Electronics

DMP Electronics 734 Guida all'installazione

DMP Electronics

DMP Electronics 893A Manuale utente

DMP Electronics

DMP Electronics 708 Manuale utente

DMP Electronics

DMP Electronics 738Zplus Manuale utente

DMP Electronics

DMP Electronics X1 Guida all'installazione

DMP Electronics

DMP Electronics 736P Radionics Manuale utente

DMP Electronics

DMP Electronics 717 Manuale utente

DMP Electronics

DMP Electronics 736P Radionics Guida all'installazione

DMP Electronics

DMP Electronics 738ZplusINT Manuale utente

DMP Electronics

DMP Electronics Wiegand 734N Manuale utente

DMP Electronics

DMP Electronics 780 Guida all'installazione

DMP Electronics

DMP Electronics Wiegand 734N Manuale utente

DMP Electronics

DMP Electronics ITI 738I Guida all'installazione

DMP Electronics

DMP Electronics 893A Manuale utente

DMP Electronics

DMP Electronics 734 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente