DMP Electronics Wiegand 734N Guida all'installazione

INSTALLATION AND PROGRAMMING GUIDE

734N Wiegand

Interface Modules

About the 734N/734N-POE...................... 1

Power Supply......................................................... 1

Zone Terminals ...................................................... 1

Annunciators.......................................................... 1

Indicator LEDs ....................................................... 1

Form C Relay......................................................... 2

Programming Connection................................ 2

PCB Features...............................................3

Install the 734N...........................................4

Mount the Device ................................................ 4

Wire the Electronic Lock.................................. 5

Network Connection.......................................... 5

Isolation Relay ...................................................... 8

Install the 333 Suppressor ............................... 9

Wire the Zone Terminals..................................10

Connect a Card Reader....................................13

Addressing the 734N........................................15

TABLE OF CONTENTS

Program the 734N .................................... 17

Program Start Display ......................................18

Initialization Option ...........................................18

Initialize Conﬁrm Option .................................18

Communication Menu.......................................18

734N DHCP...........................................................19

734N IP Address.................................................19

Subnet Mask.........................................................19

Gateway Address ...............................................19

Panel IP Address.................................................19

Panel IP Port........................................................20

734N Passphrase ...............................................20

Access Options ..................................................20

Activate Zone 2 Bypass ...................................21

Zone 2 Bypass Time .........................................22

Relock on Zone 2 Change..............................22

Activate Zone 3 Request to Exit .................23

Zone 3 REX Strike Time..................................23

Activate On-board Speaker ..........................24

Custom Card Deﬁnitions .........................25

Card Options.......................................................25

Wiegand Code Length ....................................26

Site Code Position and Length ....................26

User Code Position and Length...................26

Require Site Code ............................................. 27

Site Code .............................................................. 27

Enter Site Code..................................................28

Number of User Code Digits.........................28

No Communication with Panel ....................29

Remove Keypad................................................ 30

Public Card Formats ................................ 31

734N Network Speciﬁcations.................32

Compliance Listing Speciﬁcations ....... 34

UL Access Control.............................................34

ULC Commercial Burglary (XR150/XR550

Series Panels)......................................................34

Certiﬁcations.............................................35

Underwriters Laboratory (UL Listed)........35

International Certiﬁcations.....................37

Intertek (ETL) Listed* ...................................... 37

Export Control.................................................... 37

Product Speciﬁcations ............................38

Readers and Credentials ........................ 40

Digital Monitoring Products, Inc. | 734N Installation and Programming Guide 1

ANNUNCIATORS

An on-board programmable piezo provides local

annunciation at the 734N. You can also connect

a variety of switched ground annunciators to the

734N for remote annunciation.

INDICATOR LEDS

The 734N provides three indicator LEDs. The

red LED turns on for the same duration as the

door strike relay. The yellow LED turns on for one

second to indicate receipt of a valid Wiegand

input. The green LED indicates that data is being

sent to the panel.

The 734N and 734N-POE Wiegand Interface Modules allows you to add IP network access control

capability to XR150/XR550 and XR150INT/XR550INT Series panels using proximity credential or

mag-stripe card readers. The modules also allow you to use the powerful built-in access control

capability of DMP Panels.

POWER SUPPLY

The 734N operates at 12/24 VDC from the power

supply supporting a door’s magnetic lock or

door-strike. It can also be powered from POE.

The 734N provides a 10 Amp Form C relay

contact for lock control.

ZONE TERMINALS

Four input zones are provided to allow

connection of nearby burglary devices.

ABOUT THE 734N/734N-POE

2 734N Installation and Programming Guide | Digital Monitoring Products, Inc.

FORM C RELAY

The 734N’s Form C relay draws up to 35 mA of current. See NC/C/NO (Dry Contact Relay) and

Isolation Relay for more information.

PROGRAMMING CONNECTION

The 734N also provides a keypad programming connection that allows you to use a standard DMP

LCD keypad for initial setup. Programming can be completed using a keypad connected to the 734N

or from an XR150/XR550 or XR150INT/XR550INT panel.

Digital Monitoring Products, Inc. | 734N Installation and Programming Guide 3

PCB FEATURES

DC INPUT

WIEGAND

INPUTS ZONES

PIEZO

INDICATOR

LEDS

DOOR RELAY

NETWORK

CONNECTION

Figure 1: PCB Features

4 734N Installation and Programming Guide | Digital Monitoring Products, Inc.

INSTALL THE 734N

The 734N comes in a high-impact plastic housing that you can mount directly to a wall,

backboard, or other ﬂat surface.

DMP recommends mounting the 734N near the protected door. For easy installation, the back and

ends of the 734N housing have wire entrances. The back also contains multiple mounting holes

that allow you to mount the 734N on a single-gang switch box. See Figure2 for mounting hole

locations on the housing base.

1MOUNT THE DEVICE

Mounting Hole

Figure 2: Mounting Hole Locations

Digital Monitoring Products, Inc. | 734N Installation and Programming Guide 5

The 734N provides a Form C (SPDT) relay for controlling locks and other electronically-

controlled barriers. The three relay terminals marked NO C NC allow you to connect the device

wiring to the relay for module control.

When the 734N is powered with a 12/24 V power supply or POE, the device can power an

electric strike, up to 750 mA. See Figures 3 and 4 for typical magnetic lock and door strike

wiring. See Figure 5 for POE door strike wiring.

The Form C relay draws up to 35 mA of current and contacts are rated for 10 Amps (resistive)

at 12/24 VDC. When connecting multiple locks to the Form C relay, the total current for all locks

cannot exceed 10 Amps. If the total current for all locks exceeds 10 Amps, problems may arise

and an isolation relay may be needed. See Isolation Relay for more information.

NETWORK CONNECTION

Connect an IP network cable from the LAN/WAN connection to the 734N Network connector.

The 734N communicates AES encrypted TCP with panels that have network installed.

Two LED’s are located on the ethernet jack.

▸The green LED indicates data sent to the panel.

▸The yellow LED indicates the speed of the transmission. A solid yellow LED indicates

the network is connected at 100 Base-T. A ﬂashing yellow LED indicates the network is

connected at 10 Base-T.

2WIRE THE ELECTRONIC LOCK

6 734N Installation and Programming Guide | Digital Monitoring Products, Inc.

PROG

RED RED

KYPD IN

DATA

XMT LED

WIEGAND

READ LED

RELAY

NCCNO

GRNYELRED

Model 333

Supressor

Normally Closed

–

Magnetic Door Lock

12/24 VDC

Power Supply

Figure 3: Typical

Magnetic Lock Wiring

PROG

RED

DATA

XMT LED

WIEGAND

READ LED

RELAY

NCCNO

GRNYELRED

Model 333

Supressor

Normally Open

–+

DC Door Strike

12/24 VDC

Power Supply

Figure 4: Typical Door Strike

Wiring with Power Supply

Altri manuali per Wiegand 734N

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali DMP Electronics Unità di controllo

DMP Electronics

DMP Electronics 712-8 Manuale utente

DMP Electronics

DMP Electronics myQ 736Q Istruzioni per il montaggio

DMP Electronics

DMP Electronics 738Zplus Manuale utente

DMP Electronics

DMP Electronics RoBoard RM-G145 Manuale utente

DMP Electronics

DMP Electronics 736V Manuale utente

DMP Electronics

DMP Electronics 716 Manuale utente

DMP Electronics

DMP Electronics Wiegand 734N Manuale utente

DMP Electronics

DMP Electronics 717 Manuale utente

DMP Electronics

DMP Electronics 714 Manuale utente

DMP Electronics

DMP Electronics X1 Guida all'installazione

DMP Electronics

DMP Electronics Wiegand 734N Manuale utente

DMP Electronics

DMP Electronics RoBoard RM-G146 Manuale utente

DMP Electronics

DMP Electronics Wiegand 734N Guida all'installazione

DMP Electronics

DMP Electronics 734INT Guida all'installazione

DMP Electronics

DMP Electronics 400 Istruzioni operative e di manutenzione

DMP Electronics

DMP Electronics SCS-104 Manuale utente

DMP Electronics

DMP Electronics 861 Manuale utente

DMP Electronics

DMP Electronics 893A Manuale utente

DMP Electronics

DMP Electronics RoBoard RM-G144 Manuale utente

DMP Electronics

DMP Electronics 1134 Guida all'installazione

DMP Electronics

DMP Electronics 865 Manuale utente

DMP Electronics

DMP Electronics 734 Guida all'installazione

DMP Electronics

DMP Electronics RoBoard RM-G211 Manuale utente

DMP Electronics

DMP Electronics 734N-WIFI Guida per l'amministratore

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente