DPS Telecom T/Mon LNX Manuale utente

QUICK START

T/Mon LNX, MINI G2, SLIM G2

June 14, 2019 D-QS-TMLNX-12001

Visit our website at www.dpstele.com for the latest PDF manual and FAQs.

This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this

document may be photocopied without prior written consent of DPS Telecom.

All software and manuals are copyrighted by DPS Telecom. Said software and manuals may not be reproduced, copied,

transmitted or used to make a derivative work, by either mechanical, electronic or any other means in whole or in part, without

prior written consent fromDPS Telecom, except as required by United States copyright laws.

The material in this manual is for information purposes and is subject to change without notice. DPS Telecomshallnot be

liable for errors contained herein or consequential damages in connection with the furnishing, performance, or use of this

manual.

Notice

Revision History

June 14, 2019

August 27, 2015

February 27, 2014

February 4, 2014

Minor updates

Updated screen shots

Added browser compatability info

Initial Release

Contents

Visit our website at www.dpstelecom.com for the latest PDFmanual and FAQs

T/Mon Overview1 1

Shipping List2 2

Specifications3 4

Hardware Installation4 5

Mounting4.1 5

Power Connection: -48VDC4.2 8

Power Connection: 110VAC4.3 8

Initial Setup5 9

Changing T/Mon's IP Address via Serial Connection5.1 9

LAN Connection5.2 11

Configuring the NIC Interfaces5.2.1 12

Network Time Protocol (NTP)5.3 15

Create Shortcut to the Legacy T/Mon Administrative Console5.4 16

Alternative Method to Create Shortcut5.4.1 17

Loading Existing T/Mon Database5.5 20

Analog Groups5.6 23

Analog Trending Graphs5.6.1 24

Reference Section6 26

Powering Down or Rebooting6.1 26

Technical Support7 26

T/Mon Gold and Platinum Plans8 28

End User License Agreement9 29

T/Mon Overview1

DPS is proud to announce the latest in alarm management technology - the T/Mon. It combines T/Mon

NOC and EXP technology into one, blazing fast device. The T/Mon yields a cleaner configuration,

especially for redundant systems. T/Mon features all the flexibility you expect from T/Mon, with a much

faster processor and more RAM- just to name a few enhancements - as it lays the foundation for the

future of T/Mon.

The T/Mon Remote Alarm Monitoring System is a multiprotocol, multifunction network alarm manager

designed as a single-platform solution for all alarm monitoring applications. T/Mon collects alarm data

from a wide variety of equipment, regardless of manufacturer or protocol, and displays the state of your

entire network in one interface, eliminating the need for specialized terminals. T/Access is a thing of the

past for the LNX, as it supports a fresh, new web interface offering more flexibility and visibility than ever.

Immediate benefits of upgrading to the T/Mon platform:

·6 10/100/1000 NICs versus a single 10/100 in the

NOC. With multiple LANconfigurations becoming

increasingly popular for security reasons, your T/

Mon LNXcan communicate on 6 networks while

maintaining IP segregation. *For LNX and G2

only. T/Mon MINI G2 has 2 10/100/1000 NICs.

·Processes more ASCIIjobs, virtual polling loops,

and more GFXconnections - faster

·Completelycompatible with existing T/Mon EXP

applications, such as the SQL History Agent and

Voice Dialer

·On-board RAID 1 for true hard drive

redundancy

·Better multi-tasking environment to allow more,

faster

Shipping List2

While unpacking the T/Mon, please make sure that all of the following items are included. If some parts

are missing, or if you ever need to order new parts, please refer to the part numbers listed and call DPS

Telecom at (800) 622-3314.

T/Mon Quick Start

D-QS-TMLNX-12001

Ethernet Cable - 14 ft. T/Access Cable (DB9 to DB9)

D-PR-923-10A-14 D-PR-1053-10A-10

X2 X2

D-CS-538-20A-01 19" Rack Ears D-CS-538-20A-02 23" Rack Ears

4-Pin Barrier 2-Pin Barrier

(Shipped with DC powered unitsonly) (Shipped with DC powered unitsonly)

1-820-00814-02 1-820-00862-02

X6 X6

Standard Rack Screws Metric Rack Screws

1-000-12500-06 1-000-80750-03

5 Amp Fuse

(Shipped with DC powered unitsonly) AC Power Cord

(Shipped with AC powered unitsonly)

1-000-80375-02 Ear Screw

Specifications3

Processor 3.2 GHz Hexa-Core 8th generation I7

RAM 16 GB

LAN Interfaces Six 10/100/1000 BaseT ports (Gigabit) on T/Mon LNX/SLIM, 2 on TMon

MINI

Serial Ports Support for 16 docking modules on T/Mon LNX, 8 on T/Mon SLIMG2,

None of T/Mon MINIG2

Hard Drive Dual 1TB SATAdrives in RAID 1 Configuration

Standard Input Protocols DCP, DCPf, DCPx, Ping

Standard Output ProtocolsDCP, DCPf, DCPx

Optional Input Protocols SNMP, ASCII, Badger, Cordell, DCM, E2A, Granger, Larse, Modbus,

NEC, NTP, Pulsecom, TABS, TBOS, Teltrac, TL1

Optional Output Protocols ASCII, SNMP, TABS, TL1

Power Input Dual -48VDC power feeds or 110 VAC (depending on ordering option)

Current Draw: 3.5 Amps peak at -48VDC, 2.0 Amps peak at 110VAC

Fuse Two 5-Amp GMT fuses (DC version only)

Dimensions: LNX: 8.75” Hx 17” W x 14” D (6 RU)

SLIM/ MINI: 5.25” H x 17” W x 14” D (4RU)

Weight 28 lbs (30 lbs with slide rack)

Visual Display Front panel LCD

Removable Storage CD/DVD burner drive (supports CD-R, CD-RW, DVD+/-R), T/Mon LNX

only

Printer Support Via LPT printer port

Unit Controls 4 LCD menu control buttons

Mounting 19" or 23" rack

Fans 3 internal, 1 CPU

Operating Temperature 41° to 95° F (5° to 35° C)

Operating Humidity 0% to 90% (non-condensing)

Windows Compatibility XP, Vista, 7, 8.1, 10 32/64 bit

MTBF 60 years

EMC: Tested to EN55022/55024

Safety: Tested to EN60950-1

Both AC and DC variants have been certified for CE

Hardware Installation4

Mounting4.1

Slide Rack Mounting - Optional Accessory (T/Mon LNX only)

The Slide Rack enables the T/Mon LNXto easily slide out of its rack position for installation and service

access. Your T/Mon shipped with the Slide Rack already mounted to the unit and with the specified rack

ears in the correct position for installation. Installing the T/Mon with Slide Rack takes three steps:

1. Removing the Slide Rack from the T/Mon

2. Mounting the Slide Rack on the equipment rack

3. Mounting the T/Mon on the Slide Rack.

Note: The T/Mon with Slide Rack occupies 6 rack units of space. At least 1 rack unit (1 3/4”) should be

allowed above the T/Mon for ventilation. The Slide Rack extends nearly 13” — be sure to provide

adequate service loop in the connecting cables to allow the T/Mon LNXto extend to this distance. After

installation and testing of the T/Mon is completed, the slide lock screws should be installed in the Slide

Rack to prevent accidental migration of the unit into the aisle space. The slide lock screws go into the

equipment rack when flush mounted.

Removing the Slide Rack From T/Mon LNX

Removing the Slide Rack makes mounting the T/Mon is an easy, one person, job. To remove the Slide

Rack, follow these steps:

1. Make sure the T/Mon is off and disconnected from all network interfaces and power supplies.

2. Carefully place the T/Mon upside down on a clean, even surface. (This will not damage the unit.)

3. The T/Mon is secured to the Slide Rack by two screws — see Figure 4a. Remove these screws and

save them for reattaching the unit.

4. Gently lift the Slide Rack to remove it from the T/Mon.

Mountingthe Slide Rack - Optional

The Slide Rack is light and can easily be mounted to the equipment rack by one person. The rack ears

specified with your order (either 19” or 23”) are already attached to the Slide Rack. (If the incorrect ears

have been attached to the Slide Rack, look for the extra ears included with your shipment.) To mount

the Slide Rack to the equipment rack, follow these steps:

1. Supporting the Slide Rack with one hand, align the mounting holes in the rack ears with the rack rails.

2. Secure both brackets with the rack screws provided in the hardware bag.

Slide Rack Mounting

Mountingthe T/Mon LNX on the Slide Rack

To mount the T/Mon on the Slide Rack, follow these steps:

1. Extend the Slide Rack.

2. Lift the T/Mon and place it on the Slide Rack.

Place the T/Mon on the extended Slide Rack

3. Gently place the T/Mon onto the mounting tabs.

4. From below the T/Mon, insert the two screws that secure the T/Mon to the Slide Rack.

5. Slide the Slide Rack back into place.

Secure T/Mon to Slide Rack

Rack Mounting

If you did not order the Slide Rack, your T/Mon is equipped with rack ears that can be positioned for

either 5” projection or flush mounting in either 23” or 19” racks. To mount the T/Mon directly to the

equipment rack, follow these steps:

1. Determine which mounting configuration is required. The T/Mon is supplied with the brackets in the

19” flush and 5" projection positions.

2. If a different configuration is required, remove the 8-32 screws, re-orient the brackets and re-install

the screws.

3. Place the T/Mon in the rack and align the mounting holes in the brackets with the holes in the rack

rails. Secure each bracket with two 12-24 screws (provided in hardware bag).

Altri manuali per T/Mon LNX

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali DPS Telecom Strumento di misura

DPS Telecom

DPS Telecom NetGuardian Guida di riferimento rapido

DPS Telecom

DPS Telecom T/Mon NOC Manuale utente

DPS Telecom

DPS Telecom TempDefender G2 Manuale utente

DPS Telecom

DPS Telecom NetGuardian 216 Manuale utente

DPS Telecom

DPS Telecom NetGuardian V16 G2 Manuale utente

DPS Telecom

DPS Telecom T/Mon LNX Manuale utente

DPS Telecom

DPS Telecom NetGuardian SUI Manuale utente

DPS Telecom

DPS Telecom NetGuardian LT G2 Manuale utente

DPS Telecom

DPS Telecom BVM 48 Manuale utente

DPS Telecom

DPS Telecom NetGuardian 480 Guida di riferimento rapido

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente