INSTALLATION MANUAL
MV SERIES - MDVR for vehicles
Page: 10
V IN3 V IN4 - Inputs for video-only cameras. Connect the cameras here with the included cable which provides a DC connector to power
the 12VDC camera, a video BNC and an RCA that you will leave unused.
A / V OUT - Audio video output for CVBS monitors. Connect the monitor here with one of the adapter cables which provides a DC
connector to power the monitor at 12VDC, a video BNC and an RCA for any audio.
I / O - Here you can connect the supplied cable which allows you several auxiliary connections
WHITE SENSOR 1,2,3 you can connect 3 alarm inputs. These are voltage inputs that are activated by sending a voltage of 5 or 12VDC.
In configuration you can establish whether the alarm is determined by the presence of voltage (HIGH) or by the absence of voltage
(LOW). GRAY SENSOR OUT you can connect an alarm output between the gray cable and GND PURPLE BROWN - RS232 to
connect special devices
DSE SRL - ITALY - WWW.DSE.EU
