E Instruments Incuba-103 Manuale utente

E Instruments

AQ Incuba Air Quality Monitor

Quick Reference Operating Instructions

NOTE: FIND FULL DETAILED MANUAL ON INCLUDED THUMBDRIVE

NOTE: DO NOT LIFT OR HANDLE THE INSTRUMENT BY THE BLACK

EXTERNAL TEMP, %RH, PRESSURE SENSOR HOUSING!

1. Push the On/Off power button to activate the monitor & sampling pump. Before doing any monitoring allow the unit to run for

approximately 40-60 seconds for the CO2 sensor to stabilize & calibrate.

2. If needed, connect the external black Temperature and Humidity module (Part# TRH Mod) as shown in Figure 1 above.

3. Select a Monitoring Position:

a. If the incubator has a glass/see-thru door and the AQ Incuba can fit safely inside the incubator without

damaging the instrument (ex: extremely high humidity), place the AQ Incuba with the TRH Module connected

inside the incubator. If this is not feasible or the instrument needs to remain outside the incubator, please see

part b.

b. If the instrument needs to remain outside the incubator, connect the Filter/hose assembly (AQ650078) shown

in Figure 2 to the Center “Sample-In” / “A”inlet at the bottom of the AQ Incuba. If temperature and humidity

need to be measured connect the optional TRH-EXT probe shown in Figure 3 to the bottom of the AQ Incuba.

The proper connections are shown in Figure 4 both. Figure 5 shows proper usage of the TRH-EXT and

AQ650078 together.

Figure 2

AQ650078 (Included)

Figure 3

TRH-EXT (Optional)

Figure 4

Figure 1

Figure 5

www. .com information@itm.com1.800.561.8187

4. Making a measurement

a. Press the MEASURE key to view the Main Measuring Screen including CO2 ambient temperature,

barometric pressure, & relative humidity.

5. Turn Pump On/Off: Press the PUMP button to Turn Pump On & Off. When Pump is OFF, no sample is being made

6. Storing Data to Internal Memory (Store Data Points or Long-Term Periodic Tests) Refer to Chapter 7 in Manual

a. Press Data Storage Button

b. Select “Store Current Buffer” to store a single data point or one of the other Buffer Storage options depending

on your needs. If you want to store data in a different location, use the UP, DOWN, & OK keys to select a new

tag. Empty tags show the word empty.

c. Select “Review Buffer” to view previously stored data

d. Select “Name Buffer” and “Erase Buffer” as needed

7. START PERIODIC DATA STORAGE: This will turn on the periodic (long-term) store function. In this mode, the unit will

continuously store data at an interval displayed on the next line.

a. In the Data Storage Menu, Highlight “SELECT INTERVAL”: The time between each store is set here. This can

range from 10 seconds to 60 minutes.

b. To START data storage: Highlight and Press OK to START PERIODIC STORE.

c. To STOP data storage: Highlight and Press OK to STOP PERIODIC STORE.

www. .com information@itm.com1.800.561.8187

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali E Instruments Strumento di misura

E Instruments

E Instruments BTU900 Manuale utente

E Instruments

E Instruments E500 Manuale utente

E Instruments

E Instruments E4500 Manuale di installazione e funzionamento

E Instruments

E Instruments AQ 200 Manuale utente

E Instruments

E Instruments E8500 Plus Manuale di istruzioni per l'installazione

E Instruments

E Instruments 1100 Manuale utente

E Instruments

E Instruments AQ 100 Manuale utente

E Instruments

E Instruments AMI 300 Manuale utente

E Instruments

E Instruments BTU900 Manuale utente

E Instruments

E Instruments E4500 Manuale utente

E Instruments

E Instruments 4400 Manuale utente

E Instruments

E Instruments 1500 Manuale utente

E Instruments

E Instruments E500 Manuale utente

E Instruments

E Instruments AQ Expert Manuale di istruzioni per l'installazione

E Instruments

E Instruments 4400-N Manuale utente

E Instruments

E Instruments AQ COMFORT Manuale di istruzioni per l'installazione

E Instruments

E Instruments CT 100 O Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente