ECS PSM7 Series Manuale utente
i
Motherboard User’s Guide
This publication, including photographs, illustrations and software, is under the
protection of international copyright laws, with all rights reserved. Neither this
user’s guide, nor any of the material contained herein, may be reproduced
without the express written consent of the manufacturer.
The information in this document is subject to change without notice. The
manufacturer makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchant-
ability or fitness for any particular purpose. Further, the manufacturer reserves
the right to revise this publication and to make changes from time to time in the
content hereof without obligation of the manufacturer to notify any person of
such revision or changes.
Trademarks
IBM, VGA, and PS/2 are registered trademarks of International Business
Machines.
Intel, Pentium/II/III, Pentium 4, Celeron and MMX are registered trademarks of
Intel Corporation.
Microsoft, MS-DOS and Windows 98/ME/NT/2000/XP are registered trade-
marks of Microsoft Corporation.
AMI is a trademark of American Megatrends Inc.
It has been acknowledged that other brands or product names in this manual are
trademarks or the properties of their respective owners.
Static Electricity Precautions
1. Don’t take this motherboard and components out of their original static-
proof package until you are ready to install them.
2. While installing, please wear a grounded wrist strap if possible. If you
don’t have a wrist strap, discharge static electricity by touching the bare
metal of the system chassis.
3. Carefully hold this motherboard by its edges. Do not touch those
components unless it is absolutely necessary. Put this motherboard on
the top of static-protection package with component side facing up
while installing.
Pre-Installation Inspection
1. Inspect this motherboard whether there are any damages to components
and connectors on the board.
2. If you suspect this motherboard has been damaged, do not connect
power to the system. Contact your motherboard vendor about those
damages.
Copyright © 2006
All Rights Reserved
PSM7 Series, V5.0
July 2006
ii
Motherboard User’s Guide
Table of Contents
Trademark ............................................................................................................ i
Static Electricity Precautions ......................................................................................... i
Pre-Installation Inspection ............................................................................................. i
Chapter 1: Introduction ..................................................................................... 1
Key Features .................................................................................................................... 1
Package Contents ........................................................................................................... 4
Chapter 2: Motherboard Installation .............................................................. 5
Motherboard Components ............................................................................................ 6
I/O Ports .......................................................................................................................... 7
Installing the Processor ................................................................................................. 8
Installing Memory Modules .......................................................................................... 9
Jumper Settings ............................................................................................................ 1 0
Install the Motherboard ............................................................................................... 11
Connecting Optional Devices ..................................................................................... 1 2
Install Other Devices .................................................................................................... 1 4
Expansion Slots ............................................................................................................ 1 6
Chapter 3: BIOS Setup Utility ....................................................................... 18
Introduction .................................................................................................................. 1 8
Running the Setup Utility ................................................... …………………………...18
Standard CMOS Setup Page ....................................................................................... 1 9
Advanced Setup Page .................................................................................................. 2 0
Features Setup Page .................................................................................................... 2 2
Power Management Setup Page ................................................................................ 2 3
PCI/Plug and Play Setup Page .................................................................................. 2 4
BIOS Security Features Setup Page ........................................................................... 2 5
CPU PnP Setup Page .................................................................................................. 2 5
Hardware Monitor Page .............................................................................................. 2 6
Load Optimal Defaults ................................................................................................ 2 6
Save Changes and Exit ................................................................................................ 2 7
Discard Changes and Exit ........................................................................................... 2 7
Chapter 4: Software & Applications .............................................................. 28
Introduction .................................................................................................................. 2 8
Installing Support Software ........................................................................................ 2 8
Bundled Software Installation .................................................................................... 3 0
iii
Motherboard User’s Guide
Notice:
1 Owing to Microsoft’s certifying schedule is various to every supplier,
we might have some drivers not certified yet by Microsoft. Therefore, it
might happen under Windows XP that a dialogue box (shown as below)
pop out warning you this software has not passed Windows Logo
testing to verify its compatibility with Windows XP. Please rest assured
that our RD department has already tested and verified these drivers.
Just click the “Continue Anyway” button and go ahead the installation.
2 USB 2.0 Driver Limitations:
2-1 The USB 2.0 driver only supports Windows XP and Windows
2000.
2-2 If you connect a USB 2.0 hub to the root hub, plugging USB devices
into this hub, the system might not successfully execute certain USB
devices’ connection because it could not recognize these devices.
1
Chapter 1: Introduction
Chapter 1 Introduction
This motherboard has a LGA775 socket for latest Intel Pentium D/Pentium 4/
Celeron D processors with Hyper-Threading Technology and Front-Side Bus
(FSB) speeds up to 800 MHz. Hyper-Threading Technology, designed to take
advantage of the multitasking features in Windows XP, gives you the power to
do more things at once.
It integrates the SiS661GX Northbridge and SiS964L Southbridge that
supports the built-in USB 2.0 providing higher bandwidth, implementing
Universal Serial Bus Specification Revision 2.0 and is compliant with UHCI
1.1 and EHCI 0.95. It supports AC’ 97 Audio Codec and provides Ultra DMA
133/100/66 function. It has one 8X AGP, one CNR and three 32-bit PCI slots.
There is a full set of I/O ports including two PS/2 ports for mouse and keyboard,
one serial port, one parallel port, one LAN port(optional), one VGA port, three
audio jacks for Line-in, Line-out and Microphone, four back-panel USB2.0 ports
and onboard USB headers providing extra ports by connecting the Extended USB
Module to the motherboard.
It is a Micro ATX motherboard and has power connectors for an ATX power
supply.
Key Features
The key features of this motherboard include:
LGA775 Socket Processor
•Supports the latest Intel Pentium D/Pentium 4/Celeron D processors
with Hyper-Threading Technology
•Supports up to 800 MHz Front-Side Bus
Hyper-Threading technology enables the operating system into thinking it’s
hooked up to two processors, allowing two threads to be run in
parallel, both on separate ‘logical’ processors within the same physical
processor.
Chipset
There are SiS661GX Northbridge and SiS964L in the chipsets in accordance
with an innovative and scalable architecture with proven reliability and perfor-
mance.
•Integrated A.G.P. Compliant Target/66Mhz Host-to-PCI Bridge:
Universal AGP v3.5 Compliant and Support 1.5V AGP Interface Only
•High Performance & High Quality 3D Graphics Accelerator: Built-in a
high performance 256-bit 3D engine
2
Motherboard User’s Guide
•Complete TV-OUT/Digital Flat Panel Solution: Built-in secondary CRT
controller to support independent display of secondary CRT, LCD and
TV-out
•PCI 2.3 Specification Compliance
•Integrated Multithreaded I/O Link Mastering
•Multithreaded I/O Link Mastering with Read/Write Concurrent
transaction
Memory Support
•Two 184-pin DIMM sockets for DDR SDRAM memory modules
•Supports DDR 400/333/266 memory bus
•Maximum installed memory is 2 GB
Expansion Slots
•Three 32-bit PCI slots
•One 8X AGP slot
•One CNR slot
Onboard IDE channels
•Two IDE Connectors
•Supports PIO (Programmable Input/Output) and DMA (Direct Memory
Access) modes
•Supports IDE Ultra DMA bus mastering with transfer rates of 133/100/
66 MB/sec
VGA
•High Performance & High Quality 3D Graphics Accelerator: built-in a
high performance 256-bit 3D engine
•High Performance 2D Graphics Accelerator: maximum 64 MB frame
buffer with linear addressing
•MPEG-2/1 Video Decoder: MPEG-2 ISO/IEC 13818-2 MP@HL and
MPEG-1 ISO/IEC 11172-2 standards compliant
AC’97 Audio Codec
•Compliant with AC’97 2.3 specification
•16-bit Stereo full-duplex CODEC with independent and variable
sampling rate
•Support for 3.3v digital, 5v analog power supply and low power
consumption management
•Two analog line-level stereo inputs with 5-bit volume control: LINE_IN,
CD
•Standard 48-Pin LQFP
Onboard I/O Ports
•Two PS/2 ports for mouse and keyboard
•One serial port
3
Chapter 1: Introduction
•One parallel port
•One VGA port
•One LAN port (optional)
•Four back-panel USB2.0 ports
•Audio jacks for microphone, line-in and line-out
Fast Ethernet LAN (optional)
•Supports 10/100Mbps operation and half/full duplex operation
•IEEE 802.3/802.3u compliant
•Supports IEEE 802.3u clause 28 auto negotiation
•Supports operation under Link Down Power Saving mode
•Supports Base Line Winder (BLW) compensation
•Adaptive Equalization
USB 2.0
•Compliant with Universal Serial Bus Specification Revision 2.0
•Compliant with Intel’s Enhanced Host Controller Interface Specification
Revision 1.0
•Compliant with Universal Host Controller Interface Specification
Revision 1.1
•PCI multi-function device consists of two UHCI Host Controller cores
for full-/low-speed signaling and one EHCI Host Controller core for
high-speed signaling
•Root hub consists 4 downstream facing ports with integrated physical
layer transceivers shared by UHCI and EHCI Host Controller, up to
eight functional ports
•Support PCI-Bus Power Management Interface Specification release 1.1
•Legacy support for all downstream facing ports
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
•Power management
•Wake-up alarms
•CPU parameters and memory timing
•CPU and memory timing
The firmware can also be used to set parameters for different processor clock
speeds.
Dimensions
•Micro ATX form factor of 244 x 220 mm
Note: Hardware specifications and software items are subject to change
without notification.
4
Motherboard User’s Guide
Package Contents
Your motherboard package ships with the following items:
The motherboard
The User’s Guide
One diskette drive ribbon cable (optional)
One IDE drive ribbon cable
The Software support CD
Optional Accessories
You can purchase the following optional accessories for this motherboard.
The Extended USB module
The CNR v.90 56K Fax/Modem card
Note: You can purchase your own optional accessories from the third party,
but please contact your local vendor on any issues of the specification
and compatibility.
5
Chapter 2: Motherboard Installation
Chapter 2 Motherboard Installation
To install this motherboard in a system, please follow these instructions in this
chapter:
Identify the motherboard components
Install a CPU
Install one or more system memory modules
Make sure all jumpers and switches are set correctly
Install this motherboard in a system chassis (case)
Connect any extension brackets or cables to headers/connectors on the
motherboard
Install peripheral devices and make the appropriate connections to
headers/connectors on the motherboard
Note:
1. Before installing this motherboard, make sure jumper JP2 is under
Normal setting. See this chapter for information about locating JP2
and the setting options.
2. Never connect power to the system during installation; otherwise, it
may damage the motherboard.
Indice
Altri manuali ECS Scheda madre
ECS
ECS 945GCD-CI Manuale utente
ECS
ECS Durathon 2 Manuale utente
ECS
ECS A55F-M4 Manuale utente
ECS
ECS h61h2-a2 Manuale utente
ECS
ECS RS400-A Manuale utente
ECS
ECS 945GCT-M3 Manuale utente
ECS
ECS H61H2-M5 Manuale utente
ECS
ECS H97I-DRONE Manuale utente
ECS
ECS P6S5AT Manuale utente
ECS
ECS B85H3-M3 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
