Edge-Core ECS4620-28P Manuale di istruzioni

Questo manuale è adatto per i seguenti modelli

9

Indice

Altri manuali Edge-Core Interruttore

Edge-Core

Edge-Core ECS4100 Series Manuale utente

Edge-Core

Edge-Core ES3526YA Manuale utente

Edge-Core

Edge-Core ES3528-WDM Manuale di programmazione

Edge-Core

Edge-Core AS4610-30T Manuale utente

Edge-Core

Edge-Core Wedge100BF-32X Manuale utente

Edge-Core

Edge-Core ECS4650-54T Manuale utente

Edge-Core

Edge-Core ECS4110-28T Manuale di programmazione

Edge-Core

Edge-Core ECS4150-54T Manuale utente

Edge-Core

Edge-Core AS7312-54XS Manuale utente

Edge-Core

Edge-Core ES4524M-PoE Manuale di programmazione

Edge-Core

Edge-Core ECS5520 Series Manuale utente

Edge-Core

Edge-Core ECS3510-28F Manuale utente

Edge-Core

Edge-Core ECS4510-12PD Manuale utente

Edge-Core

Edge-Core AS6700-32X Manuale utente

Edge-Core

Edge-Core AGR420 Manuale utente

Edge-Core

Edge-Core AS7726-32X Manuale utente

Edge-Core

Edge-Core AS7535-28XBE Manuale utente

Edge-Core

Edge-Core Wedge-16X-AC Manuale utente

Edge-Core

Edge-Core ECS2100-10T Manuale utente

Edge-Core

Edge-Core AS5916-54XKS Manuale utente

Edge-Core

Edge-Core ES4308-POE Manuale di programmazione

Edge-Core

Edge-Core Wedge100BF-65X Manuale utente

Edge-Core

Edge-Core ECS4150-28T Manuale utente

Edge-Core

Edge-Core SMCGS26C-Smart Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

CLI Reference Guide

www.edge-core.com

ECS4620 Series

28/52-Port Layer 3

Stackable GE Switch

Software Release v1.2.2.26

CLI Reference Guide

ECS4620-28T Stackable GE Switch

Layer 3 Stackable Gigabit Ethernet Switch

with 24 10/100/1000BASE-T (RJ-45) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-28P Stackable GE PoE Switch

Layer 3 Stackable Gigabit Ethernet PoE Switch

with 24 10/100/1000BASE-T (RJ-45) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-28F Stackable GE Fiber Switch

Layer 3 Stackable Gigabit Ethernet Fiber Switch

with 22 SFP Ports,

2 10/100/1000BASE-T (RJ-45/SFP) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-28T-DC Stackable GE Switch

Layer 3 Stackable Gigabit Ethernet Switch

with 24 10/100/1000BASE-T (RJ-45) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-28F-DC Stackable GE Fiber Switch

Layer 3 Stackable Gigabit Ethernet Fiber Switch

with 22 SFP Ports,

2 10/100/1000BASE-T (RJ-45/SFP) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-28F-2AC Stackable GE Fiber Switch

Layer 3 Stackable Gigabit Ethernet Fiber Switch

with 22 SFP Ports,

2 10/100/1000BASE-T (RJ-45/SFP) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

(Dual AC/DC power inputs)

ECS4620-52T Stackable GE Switch

Layer 3 Stackable Gigabit Ethernet Switch

with 48 10/100/1000BASE-T (RJ-45) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-52P Stackable GE PoE Switch

Layer 3 Stackable Gigabit Ethernet PoE Switch

with 48 10/100/1000BASE-T (RJ-45) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

ECS4620-52P-2AC Stackable GE PoE Switch

Layer 3 Stackable Gigabit Ethernet PoE Switch

with 48 10/100/1000BASE-T (RJ-45) Ports,

2 10-Gigabit SFP+ Ports,

and Optional Module with 2 10-Gigabit SFP+ Ports

(Dual AC/DC power inputs)

E022019-CS-R06

– 3 –

How to Use This Guide

This guide includes detailed information on the switch software, including how to

operate and use the management functions of the switch. To deploy this switch

effectively and ensure trouble-free operation, you should first read the relevant

sections in this guide so that you are familiar with all of its software features.

Who Should Read This

Guide?

This guide is for network administrators who are responsible for operating and

maintaining network equipment. The guide assumes a basic working knowledge of

LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network

Management Protocol (SNMP).

How This Guide is

Organized

This guide describes the switch’s command line interface (CLI). For more detailed

information on the switch’s key features or information about the web browser

management interface refer to the Web Management Guide.

The guide includes these sections:

◆Section I “Getting Started” — Includes information on initial configuration.

◆Section II “Command Line Interface” — Includes all management options

available through the CLI.

◆Section III “Appendices” — Includes information on troubleshooting switch

management access.

Related

Documentation

This guide focuses on switch software configuration through the CLI.

For information on how to manage the switch through the Web management

interface, see the following guide:

Web Management Guide

For information on how to install the switch, see the following guide:

Installation Guide

For all safety information and regulatory statements, see the following documents:

Quick Start Guide

Safety and Regulatory Information

How to Use This Guide

– 4 –

Conventions The following conventions are used throughout this guide to show information:

Note:

Emphasizes important information or calls your attention to related features

or instructions.

Caution:

Alerts you to a potential hazard that could cause loss of data, or damage

the system or equipment.

Documentation

Notice

This documentation is provided for general information purposes only. If any

product feature details in this documentation conflict with the product datasheet,

refer to the datasheet for the latest information.

Revision History This section summarizes the changes in each revision of this guide.

February 2019 Revision

This is the sixth version of this guide. This guide is valid for software release

v1.2.2.26. It contains the following changes:

◆Added documentation notice.

November 2016 Revision

This is the fifth version of this guide. This guide is valid for software release

v1.2.2.26. It contains the following changes:

◆Added information for ECS4620-52T-2AC and ECS4620-52P-2AC.

◆Added "show process cpu guard" on page 130.

◆Added SFTP option to "copy" on page 142.

◆Updated syntax for "snmp-server user" on page 215.

◆Added "show authorization" on page 267.

◆Added "telnet (client)" on page 274.

◆Updated Command Usage for "dot1x default" on page 285.

◆Updated syntax for "ip dhcp snooping information option circuit-id" on

page 347.

◆Updated syntax for "clear ip dhcp snooping binding" on page 349.

◆Updated Command Usage for "ip source-guard max-binding" on page 365.

How to Use This Guide

– 5 –

◆Added Command Usage for "show interfaces brief" on page 433.

◆Updated syntax for "show port monitor" on page 475.

◆Updated Command Usage for "spanning-tree bpdu-filter" on page 536.

◆Updated Command Usage for "spanning-tree bpdu-guard" on page 537.

◆Added Command Usage to "spanning-tree spanning-disabled" on page 547.

◆Updated syntax for "switchport allowed vlan" on page 595.

◆Added "switchport dot1q-tunnel priority map" on page 604.

◆Updated syntax for "show l2protocol-tunnel" on page 613.

◆Updated syntax for "show protocol-vlan protocol-group" on page 618.

◆Updated syntax for "class-map" on page 646.

◆Updated syntax for "show policy-map interface" on page 663.

◆Added "ipv6 mld snooping proxy-reporting" on page 703.

◆Added "ipv6 mld snooping unsolicited-report-interval" on page 708.

◆Updated syntax for "ipv6 mld snooping vlan immediate-leave" on page 709.

◆Updated syntax for "show ipv6 mld snooping" on page 712.

◆Updated syntax for "show ipv6 mld snooping group source-list" on page 713.

◆Added "show ipv6 mld snooping statistics" on page 715.

◆Updated Command Usage for "ipv6 nd reachable-time" on page 949.

◆Updated syntax for "vrrp authentication" on page 966, "vrrp ip" on page 966,

"vrrp preempt" on page 967, "vrrp priority" on page 968, and "vrrp timers

advertise" on page 969.

◆Updated syntax for "ipv6 route" on page 981.

◆Updated syntax for "show ipv6 route" on page 983.

◆Updated syntax for "redistribute" on page 1011.

◆Updated syntax for "redistribute" on page 1053.

How to Use This Guide

– 6 –

December 2014 Revision

This is the fourth version of this guide. This guide is valid for software release

v1.2.2.0. It contains the following changes:

◆Added information for ECS4620-28F-DC.

July 2014 Revision

This is the third version of this guide. This guide is valid for software release v1.2.2.0.

It contains the following changes:

◆Added information for ECS4620-28T-DC.

◆Updated usage information for the command "mac-learning" on page 312.

◆Updated syntax and usage information for the command "ip source-guard

binding" on page 362.

◆Updated usage information for the command "ip source-guard mode" on

page 366.

◆Added the command "loopback-detection action" on page 502.

April 2014 Revision

This is the second version of this guide. This guide is valid for software release

v1.2.1.3. It contains the following changes:

◆Added information for ECS4620-28F, ECS4620-28T, and ECS4620-28P.

◆Extended configurable VLAN range from 1-4093 to 1-4094.

◆Added "Stack Operations" on page 69.

◆Added the command "show process cpu task" on page 130.

◆Added "Stacking" on page 198.

◆Updated syntax for "snmp-server enable traps" on page 208.

◆Added the commands "snmp-server enable port-traps mac-notification" on

page 212 and "show snmp-server enable port-traps" on page 212.

◆Updated command usage section for the command "pppoe

intermediate-agent port-format-type" on page 305.

◆Added the command "pppoe intermediate-agent port-format-type remote-id-

delimiter" on page 306.

◆Added the command "mac-learning" on page 312.

How to Use This Guide

– 7 –

◆Updated command usage section for the command "port security" on

page 313.

◆Added the command "port security mac-address-as-permanent" on page 315.

◆Added the commands "ip dhcp snooping information option encode no-

subtype" on page 342, "ip dhcp snooping information option remote-id" on

page 343, and "ip dhcp snooping information option tr101 board-id" on

page 344.

◆Added the commands "ipv6 dhcp snooping option remote-id" on page 355,

and "ipv6 dhcp snooping option remote-id policy" on page 356.

◆Updated syntax for the command "ip source-guard binding" on page 362 and

"ip source-guard max-binding" on page 365, and "show ip source-guard

binding" on page 368.

◆Added the commands "ip source-guard mode" on page 366 and "clear ip

source-guard binding blocked" on page 367.

◆Updated syntax for the command "media-type" on page 429.

◆Updated range for the commands "transceiver-threshold current" on page 442,

"transceiver-threshold rx-power" on page 443, "transceiver-threshold

temperature" on page 444, "transceiver-threshold tx-power" on page 445, and

"transceiver-threshold voltage" on page 446.

◆Added the command "show interfaces transceiver-threshold" on page 448.

◆Updated command usage section for the command "power inline maximum

allocation" on page 468.

◆Updated syntax for the command "auto-traffic-control control-release" on

page 495.

◆Added the command "loopback-detection action" on page 502.

◆Removed the command “loopback-detection mode.”

◆Added the command "loopback detection trap" on page 504.

◆Added the commands "udld detection-interval" on page 507, "udld recovery"

on page 509, and "udld recovery-interval" on page 509.

◆Updated range for the command "mac-address-table aging-time" on page 515.

◆Added the commands "spanning-tree tc-prop" on page 531, "spanning-tree

tc-prop-stop" on page 547, and "show spanning-tree tc-prop" on page 552.

◆Updated syntax for the command "mac-vlan" on page 622.

How to Use This Guide

– 8 –

◆Updated syntax for the commands "show qos map cos-dscp" on page 641,

"show qos map dscp-mutation" on page 641, and "show qos map phb-queue"

on page 642.

◆Added the commands "clear ip igmp snooping groups dynamic" on page 683,

and "clear ip igmp snooping statistics" on page 683.

◆Updated command usage section for the command "ip igmp authentication"

on page 693.

◆Added the commands "clear ipv6 mld snooping groups dynamic" on page 711

and "clear ipv6 mld snooping statistics" on page 712.

◆Updated range for the command "mvr priority" on page 730.

◆Added the commands "clear mrv groups dynamic" on page 739 and "clear mrv

statistics" on page 739.

◆Updated syntax for the command "show mvr members" on page 743 and

"show mvr statistics" on page 745.

◆Added the command "mvr6 priority" on page 751.

◆Added the command "clear efm oam event-log" on page 866.

◆Updated syntax for the commands "ip route" on page 976 and "show ip route"

on page 978.

◆Added BGP to the parameter list for the RIP command "redistribute" on

page 991.

◆Added BGP to the parameter list for the OSPFv2 command "redistribute" on

page 1011.

◆Added the command "area authentication" on page 1014.

◆Added the command "neighbor password" on page 1126.

December 2013 Revision

This is the first version of this guide. This guide is valid for software release v1.1.1.1.

– 9 –

Contents

How to Use This Guide 3

Contents 9

Figures 53

Tables 55

Section I Getting Started 63

1 Initial Switch Configuration 65

Connecting to the Switch 65

Configuration Options 65

Connecting to the Console Port 66

Logging Onto the Command Line Interface 67

Setting Passwords 67

Remote Connections 68

Stack Operations 69

Selecting the Stack Master 69

Selecting the Backup Unit 70

Recovering from Stack Failure or Topology Change 70

Renumbering the Stack 71

Ensuring Consistent Code is Used Across the Stack 71

Configuring the Switch for Remote Management 72

Using the Network Interface 72

Setting an IP Address 72

Enabling SNMP Management Access 78

Managing System Files 80

Upgrading the Operation Code 81

Saving or Restoring Configuration Settings 81

Automatic Installation of Operation Code and Configuration Settings 83

Contents

– 10 –

Downloading Operation Code from a File Server 83

Specifying a DHCP Client Identifier 86

Downloading a Configuration File and Other Parameters from a DHCP Server 87

Setting the System Clock 89

Setting the Time Manually 89

Configuring SNTP 90

Configuring NTP 90

Section II Command Line Interface 93

2 Using the Command Line Interface 95

Accessing the CLI 95

Console Connection 95

Telnet Connection 96

Entering Commands 97

Keywords and Arguments 97

Minimum Abbreviation 97

Command Completion 97

Getting Help on Commands 98

Partial Keyword Lookup 100

Negating the Effect of Commands 100

Using Command History 100

Understanding Command Modes 100

Exec Commands 101

Configuration Commands 102

Command Line Processing 104

Showing Status Information 105

CLI Command Groups 105

3 General Commands 109

prompt 109

reload (Global Configuration) 110

enable 111

quit 112

show history 112