EDM SP011AU Manuale utente
QUICK GUIDE
SMART SOLUTIONS FOR SMART HOMES
Energy Monitoring
Smart Plug
-SP011AU
Electronics Design &
Manufacturing PTY LTD
SWITCH
Rev 1.0
What's in the box
Consult the checklist below for all components.
1
Plug - Main Unit Quick Start Guide
Description
Status light
Blinking blue light: Awaiting WiFi connection
Blinking red light: Connecting
Solid blue light: Switch is OFF
Solid red light: Connected, Switch is ON
AC 100-240V 50/60HZ 10APower
240V Socket
Power Button
Status Light
240V Plug
2
Connect
Download
Set up router
This device only supports 2.4GHz WiFi frequency, it does not support
5GHz frequency or special characters such as !@#$%^&*(). Please set the
relevant parameters of the router before WiFi configuration. When your
router is configured successfully, allow your phone and device to be
within strong WiFi range to ensure a stable connection.
Interactive Home is available for both IOS and Android. Search “Interactive
Home” on the Apple / Google Play Store, or scan the QR-Code below.
Please keep network available
3
Registration Process
Open the interactive Home APP, click "Register",
read the "Privacy Policy" and click "Agree" .
Step 2
Step 1
Input a valid Mobile number or Email address and click
"Get Authentication Code". Once received, input the Veri-
fication Code to finalize login.
4
Smart Configuration
Getting started
Process
Open the Interactive Home APP, click "+" or "Add Device".
1.
2.
Step 1
Follow the instructions and make sure your passwords are
inputted correctly.
If this device has previously been registered, click the power
button untill either the light is OFF or solid Blue, reset the device
by holding down the power button for 5 seconds. The blue light
should be flashing fast.
3. Once you have created a home and named your desired rooms
you should be all set to connect your smart device.
5
Step 3 Input WiFi password and click "Confirm" & the APP will search
for your device. (You can change the network connection
before pairing)
Step 2 Select "Plugs & Switches" then "Socket". Power the device on and
make sure the indicator light is flashing rapidly blue, If not press
the power button until indicator light is solid blue or not illuminat-
ed. Hold power button down for 5 seconds until you see the
indicator light flashing rapidly blue. (When you release, the light
may change to red, just click the power button one more time)
6
Step 5 Once the device is added, you are able to change the nick-
name and room assignment from this menu (These settings
can be changed in the Home Management settings).
7
AP Mode Configuration
Getting started
Process
Open the Interactive Home APP, click "+" or "Add Device".
1.
2.
Step 1
Follow the instructions and make sure your passwords are
inputted correctly.
If this device has previously been registered, click the power
button untill either the light is OFF or solid Blue, reset the device
by holding down the power button for 5 seconds. The blue light
should be flashing fast.
3. Once you have created a home and named your desired rooms
you should be all set to connect your smart device.
8
Step 3 Select "AP Mode" in the top right. Hold the power button
down for 5 seconds until the status light blinks red slowly.
Step 2 Select "Plugs & Switches" then "Socket". Power the device on and
make sure the indicator light rapidly blinks. (If not follow Step 2
on Page 5)
9
Step 4 Input WiFi password and click "Confirm" (You can change the
network connection before pairing).
Step 4 It will then ask you to connect to the device’s hotspot. Click
"Go Connect" to enter your phone’s WiFi settings then connect
to the devices hotspot named "Smart Life-xxxx" Head back to
the APP and it will start the configuration process.
Indice
Altri manuali EDM Strumento di misura
