Step 3:
Attach the Pedals (No. 35L/R) to the Cranks
(No.36L/R). The Right Pedal (No.35R) is
marked R, and the Left Pedal (No. 27L) is
marked L.
Screw the Right Pedal (No.35R) clockwise
into Right Crank (No. 36R), and the Left
Pedal (No.35L) counter-clockwise into Left
Crank (No. 36L). Tighten and secure with a
Spanner (No.77).
NOTE: The Pedals (No.35L/R) should be kept
in lockdown during the exercise, otherwise
the pedal teeth will be damaged. Attaching
the Pedals (No. 35L/R) to the wrong Cranks
(No. 36L/R) or turning it in the wrong
direction will permanently damage the crank
and the pedal.
Step 4:
Pull the Seat Post (No.27) out completely,
and turn it so the holes in the Seat Post
(No.27) face the back of the bike. Insert Seat
Post (No.27) into the Main Frame (No.1). Set
Seat Post (No.27) at desired height. Insert
Knob (No.25) and tighten to secure.
Remove 3 Washers (No.32) and 3 Nylon Nuts
(No.31) from the Seat (No.34) with a
Spanner (No.77). Attach the Seat (No.34) to
the Seat Slider (No.33) using 3 Washers
(No.32) and 3 Nylon Nuts (No.31) that were
removed, using a Spanner (No.77).
Remove the L shape Knob (No.28) and the
Washer (No.29) from the Seat Slider (No.33).
Attach Seat Slider (No.33) to the Seat Post
(No.27) at desired position, then insert and
secure with the L shape Knob (No.28) and
Washer (No.29) that were removed.
