EKF Diagnostics Lactate Scout+ Manuale utente

Instructions for

Bluetooth® installation

for Lactate Scout+

Diagnostics

for life

Version A: Installation for Windows 7

1. At rst make sure that your PC is equipped with the required Bluetooth®

- hardware: Some PCs / laptops are already equipped (see section:

Installation for laptop computers with integrated Bluetooth®). However,

usually the included USB Bluetooth® dongle has to be connected to your

PC. Please insert the USB Bluetooth® - dongle into an available USB slot.

Usually, the Windows 7 operating system detects and installs the USB-/

Bluetooth® dongle automatically.

However, if the automatic installation fails, then please open the “Device

Manager” in the “Control Panel”:

With the right mouse button click on the entry “BCM20702A0”. Now

select the context menu item “Update Driver Software”:

In the next dialog window select the option “Browse my computer for

driver software”:

Now, in the next dialog window click on button „Browse“:

2. Next, switch on the Lactate Scout+ in “Setting and Storage Mode“:

Before it is switched on, make sure that there is no sensor plugged

into the device.Turn on the device by pressing the scroll wheel for two

seconds and turn the scroll wheel until a blinking “set“ and a blinking

Bluetooth

icon „ “ appear on the LCD screen.

After pressing the scroll wheel

briey, the menu is activated and

the message “OFF” is displayed on

the main display together with the

blinking Bluetooth

icon:

By turning the scroll wheel by

one click, the message “On” is

appearing on the LCD screen

together with an outlined

Bluetooth

icon „ “:

After pressing the scroll wheel briey, the Bluetooth

module is

activated. Please note: The device will turn off automatically after

ve minutes if no user input is detected. However, you can turn on

the device again as already described above and continue working.

(See Lactate Scout+ manual).

On the enclosed CD „Info CD Lactate Scout+” select the subfolder

„Drivers_Bluetooth_USB_Adapter_LM506“:

Wait until the driver installation is nished:

Attention: If you are using the Lactate Scout Data Link Software, no

additional steps are needed for the Bluetooth installation. You can proceed

directly with the installation of the software (see “Software installation and

user manual”, p. 4). Otherwise continue with the installation as follows:

3. To start the installation of the Lactate Scout+ double-click the Bluetooth

icon in the task bar (top gure) or in the window of hidden icons

(second gure):

4. A new dialog window “Devices and Printers Bluetooth Devices“ appears.

Please click “Add a device“:

5. The PC will search for Bluetooth

devices in its vicinity. After a

successful search, a device called “Lactate Scout Plus” will appear

in the list (other Bluetooth

devices may also be detected).

Click on the appropriate icon and then click “Next”.

6. In the next dialog box, select the option “Enter the device’s pairing

code“:

In the input eld please enter four zeros (0000). Please note: You have

30 seconds to complete this eld. Click “Next”:

7. During the installation the following messages appear on the bottom

right corner:

8. In the dialog box please click on “Close“ to complete the installation:

9. For most PC’s the installation only has to be executed once and usually

doesn’t need to be repeated.

To transfer the data from the Lactate Scout+ to your PC you need

Lactate Scout compatible software such as the “Lactate Scout Assistant”or

the “Lactate Scout Data Link” software.

How to determine the COM port number assigned to the serial

Bluetooth® - connection when using third party software

Before any data transfer, the “Lactate Scout Assistant” software scans all

installed COM ports automatically for the connected Lactate Scout+device.

When using third-party software, which doesn’t support such a COM port

scanning function, the port number has to be set manually. To determine

the COM port number assigned to the Bluetooth

connection, please

proceed as follows:

1. Open the dialog window “Devices and Printers” by double-clicking

the Bluetooth

icon in the task bar (left gure) or in the window of

hidden icons (right gure):

2. Now double-click on “Lactate Scout Plus” icon:

3. In the property window select the tab “Services“:

The COM port number shown in this window has to be entered at the

communication settings of your software. Please read the appropriate

section in the manual of the software you are using.

Version B: Installation for Windows 8.1

1. At rst make sure that your PC is equipped with the required Bluetooth®-

hardware: Some PCs / laptops are already equipped (see section: Installation for

laptop computers with integrated Bluetooth®). However, usually the included

USB Bluetooth® dongle has to be connected to your PC. Please insert the USB

Bluetooth® - dongle into an available USB slot.

Usually, the Windows 8 operating system detects and installs the USB-/Bluetooth®

dongle automatically. However, if the automatic installation fails, then click with the

right mouse button on the Windows start button and open the “Device Manager”.

With the right mouse button click on the entry “BCM20702A0”. Now select the

context menu item “Update Driver Software”:

In the next dialog window select the option “Browse my computer for driver

software”:

Now, in the next dialog window click on button „Browse“:

On the enclosed CD „Info CD Lactate Scout+” select the subfolder „Drivers_

Bluetooth_USB_Adapter_LM506“:

2. Next, switch on the Lactate Scout+ in “Setting and Storage Mode“:

Before it is switched on, make sure that there is no sensor plugged

into the device. Turn on the device by pressing the scroll wheel for two

seconds and turn the scroll wheel until a blinking “set“ and a blinking

Bluetooth

icon „ “ appear on the LCD screen:

After pressing the scroll wheel

briey, the menu is activated and

the message “OFF” is displayed on

the main display together with the

blinking Bluetooth

icon:

By turning the scroll wheel by

one click, the message “On” is

appearing on the LCD screen

together with an outlined

Bluetooth

icon „ “:

After pressing the scroll wheel briey, the Bluetooth

module is

activated. Please note: The device will turn off automatically after

ve minutes if no user input is detected. However, you can turn on

the device again as already described above and continue working.

(See Lactate Scout+ manual).

Wait until the driver installation is nished:

Attention: If you are using the Lactate Scout Data Link Software, no additional

steps are needed for the Bluetooth installation. You can proceed directly with

the installation of the software (see “Software installation and user manual”,

p. 4). Otherwise continue with the installation as follows:

On the Windows®- desktop open the

Bluetooth

settings by double

clicking on the

Bluetooth

- icon in the taskbar:

A new page „PC and devices” is opened with the sub menu „Manage

Bluetooth devices”. The PC is searching for

Bluetooth

- devices in its

vicinity. After a successful search, a device called “Lactate Scout Plus”

is appearing in the list (possibly together with other

Bluetooth

devices) with the state “Ready to pair”. Click on the „Lactate Scout Plus”

device:

In order to communicate with each other, the PC and Lactate Scout+

device have to be paired. Perform the pairing by clicking on button „Pair“:

In the next dialog window you are prompted to enter the passcode for

your device:

In the input eld please enter four zeroes (0000) within 30 seconds. Click

“Next”.

After the installation, the Lactate Scout+ device is displayed with the state

„Connected“:

Now you can return to the desktop and use you device. For the particular

PC and Lactate Scout+ the installation has to be executed only once and

usually doesn’t need to be repeated again. To transfer the data from the

Lactate Scout+ to your PC you need Lactate Scout- compatible software

such as the “Lactate Scout Assistant”.

How to determine the COM port number assigned to the

serial Bluetooth® - connection when using third-party

software

Before any data transfer, the “Lactate Scout Assistant” software scans all

installed COM ports automatically for the connected Lactate Scout + device.

When using third-party software, which doesn’t support such a COM port

scanning function, the port number has to be set manually. To determine the

COM port number assigned to the

Bluetooth

connection, please proceed

as follows:

Starting from the Windows 8.1 start screen please activate the right

toolbar and click on the icon “Search”. Search for the section „Devices

and Printers” and open the section by mouse click:

Now double-click on “Lactate Scout Plus” to open the corresponding

property window:

Altri manuali EKF Diagnostics Strumento di misura

EKF Diagnostics

EKF Diagnostics Biosen C-Line Clinic Manuale utente

EKF Diagnostics

EKF Diagnostics Lactate Scout Sport Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente