Eletech NTP-100 Manuale utente
NTP-100
Private Network Time Server
User’s Manual
Second Edition
（C）2016 - 2020 Eletech Enterprise Co., Ltd
All Rights Reserved
- 1-
TABLE OF CONTENTS
Package Contents................................................................................................. 2
Panel Descriptions ............................................................................................... 3
Connection Diagram......................................................................................................5
Installing NTPClock Client Software..................................................................... 6
LCD Information............................................................................................... 13
Device Configuration.........................................................................................14
- 2-
Package Contents
QUANTITY
ITEM DESCRIPTION
1
NTP-100
1
MR-350 GPS Receiver
1
RJ-11 to PS2 Cable
1
RJ-45 Network Cable
1
Power Adapter
1
Installation CD
If any item is missing or broken upon opening of the package, please contact your
dealer immediately.
- 3-
Panel Descriptions
Top Panel
LED
Color
Status
Indicating
Power
Green
- Solid
- Off
- Power On
- Power Off
Program
Green
- Solid
- Off
- System is ready
- System is not ready
LAN
Green
- Solid
- Flashing
- Off
- Network link established
- Network data activity
- Network link not established
GPS
Green
- Solid
- Off
- GPS signals is acquired
- Acquiring GPS signal or GPS not found
LCD
Display
- 4-
Rear Panel
LAN:RJ-45 Ethernet jack
Reset: No use.
GPS Ant.:MR-350 GPS Receiver input jack
DC 12V: Power jack
MR-350 GPS Receiver
- 5-
Connection Diagram
Connect the NTP-100 to the network as shown in the following diagram.
The NTP-100 Time Server is designed to provide very accurate time obtained from
GPS satellites, so that all PCs in the same network can be precisely synchronized
without accessing any outside NTP servers.
- 6-
Installing NTPClock Client Software
In order to obtain time from the NTP-100, the PC needs to have the NTPClock client
software installed.
1. Insert the installation CD and open the NTP Clock folder. Double-click setup.exe.
The following dialog box will appear:
- 7-
2. Click Next.
3. Click Next.
- 8-
4. NTPClock is installing..
5. Click Close to finish the installation.
- 9-
6. After installation, a NTPClock icon will be created on the Windows desktop.
7. Execution of the NTPClock program requires administrator privilege. If you are
not logged in as administrator, you must do the following:
Right click on the NTPClock icon and select Properties.
Indice
Altri manuali Eletech Server
