ElmoTech MU-800-2 Guida rapida
ELECTRONIC MONITORING SYSTEM
MOBILE UNIT OPERATIONAL
GUIDE(
(MU-800-2)
Forward
Mobile Unit Operational Guide
F-3
Information in this documentation is subject to change without notice and
does not represent a commitment on part of ElmoTech Ltd. The software
described in this document is subject to the license agreement that is
included with the product, which specifies the permitted and prohibited uses
of the product. Any unauthorized duplication or use of this documentation,
in whole or in part, in print, or in any other storage or retrieval system is
prohibited.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form by
any means for any purpose other than the purchaser’s personal use without
the permission of ElmoTech Ltd.
© 2002 ElmoTech Ltd. All rights reserved.
Unless otherwise noted, all names of companies, products, street addresses,
and persons contained herein are part of a completely fictitious scenario and
are designed solely to document the use of an ElmoTech product.
Contact Us
Corporate Headquarters
ElmoTech Ltd.
2 Ha-Barzel St.,
P.O. Box 13236,
61132 Tel Aviv, Israel
Tel: 972-3-7671800
Fax: 972-3-7671801
U.S.A Customers, call 1-800-313-1483
E-mail: [email protected]
Visit us at: www.elmotech.com
Table of Contents
Mobile Unit Operational Guide
TC-1
TABLE OF CONTENTS
Section Page
1 INTRODUCTION.......................................................................... 1-1
1.1 About the Mobile Unit........................................................................ 1-1
2 GETTING STARTED ................................................................... 2-1
2.1 About This Manual ............................................................................ 2-1
2.2 Document Conventions ...................................................................... 2-2
3 MOBILE UNIT ACTIVATION AND OPERATIONAL
INSTRUCTIONS ............................................................................. 3-1
3.1 Parts of the Mobile Unit..................................................................... 3-1
3.1.1 A-Display Panel ............................................................................ 3-1
3.2 Activating the Mobile Unit ................................................................ 3-2
3.3 Navigating the Display Panel............................................................. 3-2
3.4 Defining Mobile Unit Operational Settings...................................... 3-4
3.4.1 Changing the Backlight Setting..................................................... 3-4
3.4.2 Changing the Buzzer Tone ............................................................ 3-4
3.4.3 Changing the Keypad Tone........................................................... 3-5
3.4.4 Changing the Disappearance Alert Time....................................... 3-5
3.4.5 Changing the Range Setting .......................................................... 3-5
3.4.6 Changing the Date and Time......................................................... 3-6
Table of Contents
Mobile Unit Operational Guide
TC-2
3.5 Managing the Mobile Unit’s Memory .............................................. 3-7
3.5.1 Managing the Event Log ............................................................... 3-7
3.5.1.1 Viewing the Event Log........................................................... 3-7
3.5.1.2 Deleting the Event Log........................................................... 3-8
3.5.2 Managing the Members List.......................................................... 3-8
3.5.2.1 Viewing the Members List ..................................................... 3-8
3.5.2.2 Adding / Editing a Member’s Name....................................... 3-8
3.5.2.3 Deleting the Members List ..................................................... 3-9
3.6 Monitoring Offenders ...................................................................... 3-10
3.6.1 Monitoring All Transmitters........................................................ 3-10
3.6.2 Monitoring a Single Transmitter (Locked).................................. 3-10
3.6.3 Status Indicators .......................................................................... 3-11
3.7 Charging the Mobile Unit ................................................................ 3-13
4 MAINTAINING & PACKING THE MOBILE UNIT........................ 4-1
4.1 Cleaning the Mobile Unit................................................................... 4-1
5 MOBILE UNIT SPECIFICATIONS............................................... 5-1
Introduction
Mobile Unit Operational Guide
1-1
1 Introduction
1.1 About the Mobile Unit
The Mobile Unit (MU) is based on Elmo-Tech’s field proven RF
PRQLWRULQJtechnology and is one of the many unique elements of the
(OHFWURQLFMonitoring System.
The Mobile Unit is a lightweight, palm sized, portable monitoring device
that can be used by mobile officers in the field to detect the presence of
clients wearing Elmo-Tech Transmitters.
The Mobile Unit is an add-on module that allows officers to discreetly
confirm offender locations, while avoiding any physical contact as well as
interruptions in offender daily activities. It enables officers to monitor
clients who are required to attend work, school, or counseling sessions,
therefore helping monitoring personnel to verify compliance with schedule
requirements and sentence restrictions.
The Mobile Unit includes the following features:
• Ability to verify monitored offender compliance while patrolling in a
vehicle, or on foot
• Minimizing direct unnecessary contact with offenders
• Light, palm sized and water-resistant new design
• 18 hour rechargeable battery
• Extended memory capacity
• Windows™ PC interface, for batch report processing
Getting Started
Mobile Unit Operational Guide
2-1
2 Getting Started
2.1 About This Manual
The Mobile Unit Operational Guide has been created for the monitoring
personnel and is meant as a guide through the Mobile Unit operational
procedures. This manual assumes that you have at least some experience
with the Electronic Monitoring System.
This manual does not contain information regarding system settings,
configuration or any other software produced by ElmoTech Ltd., unless
directly related to this produce.
Please refer to the appropriate manuals for information with respect to the
Mobile Unit Monitor Operator’s manual.
The Mobile Unit Operational guide is divided into the following chapters:
Introduction – This chapter introduces you to the Mobile Unit (MU)
monitoring methodology.
Mobile Unit Activation & Operational Instructions – This chapter
describes the various activation and operational procedures with regard to
the Mobile Unit.
Maintaining the Mobile Unit – This chapter describes the maintenance
procedures regarding the Mobile Unit.
Mobile Unit Specifications – This chapter lists the Mobile Unit
specifications and main features.
Getting Started
All Mobile Unit related hardware and software must be installed and
repaired by a qualified ElmoTech Ltd. customer service representative or
an experienced system administrator.
2.2 Document Conventions
A Table of Contents and Table of Figures are included in this manual in
order to help you quickly and easily find the information that you need.
The following conventions are used throughout the manual:
Notes within the documentation are preceded by the note symbol and
indicates extra information that can be of help about a particular function or
procedure.
Reference Information within the documentation is preceded by an
information symbol and indicates a reference or link to information in
another part of the manual that may be related to the current information.
Numbered Lists indicate procedures that must be followed sequentially.
You must complete the steps shown in the sequence they are presented in
order to ensure reliable results.
Bulleted Lists indicate general information about a particular function or
procedure and do not imply a sequential procedure.
ElmoTech Ltd is committed to innovation and continued improvement.
Upgrades may be announced that consist of software improvements and
updated manuals will generally accompany those system changes.
Mobile Unit Operational Guide
2-2
Mobile Unit Activation and Operational Instructions
3 Mobile Unit Activation and
Operational Instructions
3.1 Parts of the Mobile Unit
Antenna
LED Indicators
Infrared panel
A-Display Panel
Up U
Button Down V
Button
Charging Socket
3.1.1 A-Display Panel
Mobile Unit Operational Guide
3-1
40193 ---- 03:46
__Status: BD ST __
A
LL:38 PR:38(13)
▲Menu ▼Lock
Tx ID number Current time
Tx tamper status
Area status
Control bar
Mobile Unit Activation and Operational Instructions
3.2 Activating the Mobile Unit
To activate the Mobile Unit while in Off mode:
Connect one end of the power adapter into the wall socket and connect the
other end into the charging socket on the Mobile Unit.
To activate the Mobile Unit while in Standby mode:
Press the Down Vbutton continuously for about 3 seconds. Once activated
the Mobile Unit makes an audible beeping sound, the system logo, version
number and current date and time are briefly displayed in the Display panel.
The Mobile Unit automatically enters into monitoring mode. This indicates
that the Mobile Unit has been activated successfully.
To deactivate the Mobile Unit:
Select Menu, navigate to the Off menu and select either Standby or Off.
Once deactivated, the Mobile Unit shuts down.
3.3 Navigating the Display Panel
To enter the Main menu:
Select Menu located on the Control bar. The Main menu is displayed.
Mobile Unit Operational Guide
3-2
<
MNU>[OFF] MEM REM
SET ;
Shutdown unit
▲Enter ▼Next
Menu bar
Battery level
indicator
Control bar
Indice
Altri manuali ElmoTech Strumento di misura
