Eltako GFVS-Safe II Manuale utente
Quick start guide:
Eltako GFVS-Safe II
Quick start guide Eltako GFVS-Safe II
2
Index
1 General ............................................................................................................................................ 3
2 Scope of delivery ............................................................................................................................. 3
3 Specifications ................................................................................................................................... 3
4 Connections of the Eltako GFVS-Safe II ........................................................................................... 4
First-start-up ....................................................................................................................................
.1 Menu ....................................................................................................................................... 7
.2 Eltako GFVS 3.0-Software ........................................................................................................ 7
.3 PCT 14 ...................................................................................................................................... 7
.4 Date/Time ................................................................................................................................ 7
. Language selection .................................................................................................................. 8
.6 Network settings ..................................................................................................................... 8
.7 Remote settings ....................................................................................................................... 9
.8 BSC-BAP Finder ........................................................................................................................ 9
.9 GFVS 3.0 settings ..................................................................................................................... 9
.10 Presets ................................................................................................................................... 10
.10.1 License ........................................................................................................................... 10
.10.2 Database ........................................................................................................................ 10
.10.3 Network ......................................................................................................................... 10
.11 GFVS-Update ......................................................................................................................... 10
6 Eltako quickcon®-technology ........................................................................................................ 11
7 System tools .................................................................................................................................. 1
7.1 GFVS-tools ............................................................................................................................. 1
7.1.1 Backup, restore or delete database .............................................................................. 16
7.1.2 System backup ............................................................................................................... 17
7.1.3 Reset license for license issues ...................................................................................... 18
7.2 Repair license ........................................................................................................................ 19
7.3 Code MeterCC ....................................................................................................................... 19
7.4 Change web password ........................................................................................................... 19
8 System settings .............................................................................................................................. 20
8.1 Techn. Support (team viewer) ............................................................................................... 20
8.2 Copy wallpapers .................................................................................................................... 20
8.3 Export log-files ....................................................................................................................... 21
9 Switch off Eltako GFVS-Safe II ....................................................................................................... 22
10 Restore system backup ............................................................................................................. 22
11 Technical support ...................................................................................................................... 24
Quick start guide Eltako GFVS-Safe II
3
1General
To ensure reliable function of the product please read this manual carefully. The liability of Eltako
GmbH for defects shall be excluded if the defects are due to usage not according to the intended
purpose or ignoring the operating instruction (incorrect installation, incorrect start-up, incorrect
operation, etc.).
The intended purpose of Eltako GFVS-Safe II with LAN, WLAN and optionally M2M communication is
the visualization of sensor-information, actuator switching states and consumption data plus the
control of actuators.
2Scope of delivery
• Eltako GFVS-Safe II
• External power supply and cables
• 2 x Ethernet connection cable 2m RJ4 (therefrom 1 x Cross-Over)
• Associated antennas
• Eltako GFVS 3.0-software package incl. license key
• Quick start guide (this manual)
3Specifications
Processor: Intel® Atom™ N2800 (2 x 1,86 GHz)
Chip set: Intel NM10 Express
Working memory: 2 GB DDR3 Fixed disk storage: 120GB SSD Graphics function: Intel® GMA
Interface: 1 x LAN RJ-4 Intel® 10/100/1000
1 x WLAN 802.11 b/g/n
4 x USB 2.0 (2 x High-Current 1.3 A)
1 x HDMI
1 x VGA
1 x Line out 1 x Mic in
Software and
Applications: Eltako GFVS 3.0
PCT 14 Software
Backup- and restore function
Quick start guide Eltako GFVS-Safe II
4
Power consumption
without GSM Modem: 11 W
with GSM-Modem: 13 W
Dimension: 199 x 180 x 39 mm
4Connections of the Eltako GFVS-Safe II
Figure 1: Front view
Figure 2: Backside
Quick start guide Eltako GFVS-Safe II
Ensure an optimal cooling when mounting. One of three entilation outlets must be faced
upwards.
First-start-up
• Mount the blue EnOcean, the black WI-FI and the optional blue GSM-Antenna to the provided
ports (figure 1 and 2)
• Connect the external power supply to a 230V socket and the GFVS-Safe II, the blue LED shows
power supply
• To configure the software connect a monitor to the VGA or HDMI Port, keyboard and mouse to
the USB ports
• Alternatively you can connect the Eltako GFVS-Safe II with a remote controlled PC via network to
configure the system
• Using the Cross-Over-cable it is recommend to assign a fixed IP address, for details see menu item
.7
Switch on the Eltako Safe II. During start-up you will see the following dialog:
Figure 3: start-up-view
If necessary you can change to the recovery mode to restore a system backup. If no entry is made the
Eltako GFVS-Safe II will be started after 10 seconds.
Quick start guide Eltako GFVS-Safe II
6
Eltako GFVS 3.0-Software is already installed and launches automatically after switching on:
Figure 4: Start of the Eltako GF S 3.0 software
Eltako GFVS 3.0-Software is running:
Figure 5: Eltako GF S 3.0 software has been started
The task bar is located on the bottom of the screen. Beside date and time the icon for the network
connection is displayed.
Quick start guide Eltako GFVS-Safe II
7
.1 Menu
The menu is invoked by a right-click on the background:
Figure 6: Menu
.2 Eltako GFVS 3.0-Software
Eltako GFVS 3.0-Software is launched via the menu item “GFVS 3.0“. A detailed manual is available
under the menu item “manuals – Eltako GFVS 3.0 manual”.
.3 PCT 14
Since Version 3.8.3.0 the PCT14 (Version 6) is already integrated.
.4 Date/Time
Via the menu item “systems settings - date/time” you invoke the dialog to adjust date/time:
Figure 7: Time and date settings
Quick start guide Eltako GFVS-Safe II
8
. Language selection
Via the menu item “system settings – language selection“ you invoke the dialog to change the
language.
Figure 8: Language selection
.6 Network settings
Via the menu item “system-settings – network-settings“ the configuration of network adapter can be
adjusted.
Figure 9: Network settings
The LAN Interface is configured to operate in a network with a DHCP server.
Note: In reco ery mode the LAN interface has the IP 192.168.168.100.
Quick start guide Eltako GFVS-Safe II
9
.7 Remote settings
Via the menu item “system settings – remote-settings“ further settings for remote access can be made.
Figure 10: Remote settings
If you connect another computer via crossover cable to the network port of the Eltako GFVS-Safe II,
you can directly access with a remote client (e.g. TightVNC).
The default password is: password
The Interface is configured to operate in a network with DHCP.
Note: In reco ery mode the network interface has the IP 192.168.168.100.
.8 BSC-BAP Finder
The BSC-BAP finder is used for configuration of BAPs, BIERS and IPG170(P) and can be opened via menu
item “system-tools –BSC-BAP finder“.
A detailed manual is available via the menu point “manuals – BSC-BAP finder“.
.9 GFVS 3.0 settings
This dialog is invoked via “System tools - GFVS settings”.
The menu item “create log files” generates log files that document possible errors and provide
solutions for the technical support.
With “size of the overview window” the size of the overview window to associated pc-Clients is
adjusted
„Team Viewer Start-up integrates the team viewer to the start-up. To accept the setting, a restart is
required.
Figure 11: Application settings
Quick start guide Eltako GFVS-Safe II
10
“Hide main window“ starts the Eltako GVFS 3.0 software with the overview window. The buttons of
the main window will be integrated into the main menu “configuration”.
Figure 12: configuration menu
.10 Presets
.10.1 License
The Eltako GFVS-Safe II is delivered with an activated Eltako GFVS 3.0 license. If re-activation is
required, an Eltako GFVS 3.0 license key is attached.
.10.2 Database
For data storage a PostgreSQL database is established.
.10.3 Network
The interface is configured to operate in a network with DHCP.
.11 GFVS-Update
Via “system tools - GFVS-Update“ the firmware of Eltako GFVS-Safe II or GFVS 3.0-software can be
updated. The update can be installed via internet or USB stick. The file for the update has to be on the
USB stick subfolder “/hc-import/update/*.*”.
If the USB stick is not recognized, it can be mounted with a click on the USB-stick icon.
Figure 13: GF S-Update
Indice
