EMAC PCM-4896 Manuale utente
PCM-4896
All-in-OneNSGeodeGX1Single
BoardcomputerwithLCD,
Ethernet, Audio, & 4 COMs
FCC STATEMENT
THISDEVICECOMPLIESWITHPART15FCCRULES.OPERA-
TIONISSUBJECT TOTHEFOLLOWINGTWOCONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER-
ENCE.(2)THISDEVICEMUSTACCEPTANYINTERFERENCE
RECEIVEDINCLUDINGINTERFERENCETHATMAYCAUSE
UNDESIREDOPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE
PROTECTION AGAINTST HARMFUL INTERFERENCEWHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVI-
RONMENT. THIS EQUIPMENT GENERATES, USES, AND
CAN RADIATE RADIO FREQUENCY ENERGYAND, IFNOT
INSTATLLEDAND USED IN ACCORDANCE WITH THE IN-
STRUCTION MANUAL, MAY CAUSE HARMFUL INTER-
FERENCE TO RADIO COMMUNICATIONS.OPERATION OF
THIS EQUIPMENT IN A RESIDENTIALAREA IS LIKELY TO
CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TOCORRECT THE INTERFER-
ENCE AT HIS OWN EXPENSE.
Copyright Notice
Thisdocument iscopyrighted, 1999. Allrights are reserved.The orig-
inal manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties which may result from its
use.
Acknowledgements
AMD is a trademark of Advanced Micro Devices, Inc.
AMI is a trademark of American Megatrends, Inc.
Award is a trademark of Award Software International, Inc.
Cyrixis a trademarkof CyrixCorporation.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium II are trademarks of Intel Corporation.
Microsoft Windows®
is a registered trademark of Microsoft Corp.
SMC is a trademark of Standard Microsystems Corporation.
RTL isatrademark ofRealtekSemi-Conductor Co.,Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
SiS is a trademark of Silicon Integrated Systems Corp.
VIA is a trademark of VIA Technology, Inc.
All other product names or trademarks are properties of their
respective owners.
Manual PCM-4896 9th Edition
Prepared in Taiwan May. 2002
A Message to the Customer
EMAC Customer Services
Each and every EMAC's product is built to meet your exact needs
and specifications to ensure excellent performance in the harsh and
demanding conditions which is typical of the industrial environments.
Whether the new EMAC equipment is designed for the laboratory or
the factory floor, you can be assured that the product will provide the
reliability and ease of operation for which the name EMAC has
come to be known.
Your satisfaction is our primary concern, and here is a guide of the
services for EMAC's customers. To get the full benefit of our
services, please follow the instructions below carefully.
Technical Support
We hope you can get the outstanding performance from our products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in
your product documentation. These answers are normally much
more detailed than the ones we can provide over the phone.
So please consult this manual first. If you still cannot find the
answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our
dealers are well trained and ready to give you the support you need
to get the most from your EMAC products. In fact, most problems
reported are minor and could be easily solved over the phone.
In addition, professional technical support is available from EMAC's
engineers every business day. We are always ready to give advice
on application requirements or specific information on the installa-
tion and operation of any of our products.
Product Warranty
EMAC warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
two yearsfrom the date of purchase.
This warranty does not apply to any products which have been
repaired or modified by unauthorized personnel, or those products
which have been misused, abused,installed improperly and altered
accidentally. EMAC assumes no liability under the terms of this
warranty as a consequence of such events.
Because of EMAC's high quality-control standards and rigorous
testing, most of our customers never need to use our repair service.
If an EMAC's product is defective, it will be repaired or replaced with
no charge during the warranty period. For out-of-warranty repairs,
you will be billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more
details.
If you think you have received a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU type and speed, EMAC products used, other
hardware and software used, etc.) Note anything abnormal and
list any on-screen messages you get when the problem occurs.
2.Please prepare your manual, product, and other helpful information
before calling your dealer to describe your problem.
3.If your product is diagnosed as defective, please manage to obtain
an RMA (return material authorization) number from your dealer.
This allows us to deal with your return quickly.
4.Carefully pack the defective product, a fully-completed Repair
and Replacement Order Card,and a photocopy proof of pur-
chase date (such as your sales receipt) in a shippable container.
A product returned without the proof of the purchase date is not
eligible for warranty service.
5. Write the RMA number visibly on the outside of the package
and ship it out after paying to your dealerfor it.
Packing list
Before you begin installing your card, please make sure that the fol-
lowing materials have been shipped:
• 1PCM-4896All-in-One Single BoardComputer
• 1Quick InstallationGuide
• 1 CD-ROM contains the followings:
-- User's Manual (this manual in PDF file)
-- Ethernet drivers and utilities
--VGA driversand utilities
-- Audio drivers and utilities
-- Latest BIOS (as of the CD-ROM was made)
The PCM-4896 require several cables for operation. You can make
them yourself or pruchase an optioanl cable kit, PCM-10489-5
If any of these items are missing or damaged, contact your distri-
buitor or sales representative immediately.
Notice
DearCustomer,
Thank you for purchasing the PCM-4896 board. This user's man-
ual is designed to help you to get the most out of the PCM-4896,
please read it thoroughly before you install and use the board. The
product that you have purchased comes with an two-year limited
warranty, but EMAC will not be responsible for misuse of the prod-
uct. Therefore, we strongly urge you to first read the manual before
using the product.
Contents
Chapter 1: General Information.........................................1
Introduction....................................................................2
Features..........................................................................3
Specifications..................................................................4
Board layout....................................................................7
Board dimensions...........................................................8
Chapter 2: Installation ........................................................9
Jumpers and connectors...............................................10
Locating jumpers...........................................................12
Locating connectors......................................................13
Setting jumpers.............................................................14
CPU installing and upgrading.......................................15
Installing DRAM (DIMMs).........................................16
Internal buzzer select (J1)............................................17
Clear CMOS (J4)..........................................................17
ATX Soft-Power Switch connector (J5)........................17
Audio output select (J6)...............................................18
CD audio connector (J7)...............................................18
LCD driving voltage select (J8)...................................19
LCD clock signal select (J9)........................................19
COM3/COM4 RI pin voltage select (J12, J11)...........20
COM2 RS-232/422/485 select (J13, J14)....................21
SW1 (1~3) Cpu frequency ratio....................................22
SW2 (1) CPU clock select............................................22
GX1 CPU jumper setting examples.............................23
DOC address select SW1 (5, 6)....................................24
Power connectors (PW1, J3)........................................25
ATX power connector (PW1)............................................25
CPU fan power connector (J3)..........................................25
USB connector (CN2)...................................................26
IDE hard drive connector (CN4)..................................27
Connecting the hard drive.................................................27
IDE hard drive connector (CN4).......................................28
Front Panel connector (CN5)........................................29
IrDA connector (CN6)..................................................30
Display connectors (CN7, CN9)...................................31
VGA display connector (CN9)..........................................31
LCD connector (CN7).....................................................32
Keyboard and mouse connector (CN8)........................33
Audio connector (CN10)...............................................34
Parallel port connector (CN11).....................................35
Parallel port IRQ..............................................................35
Parallel port connector table (CN11)..................................35
100Base-Tx Ethernet connector (CN12).....................36
Digital I/O connector (CN15).......................................36
Serial ports (CN13).......................................................37
COM 1-4 RS-232/422/485 serial ports (CN13)...................37
Floppy drive connector (CN14)....................................38
Connecting the floppy drive...............................................38
Floppy drive connector (CN14)..........................................39
Ethernet LED signal connectors (LED1).....................40
DiskOnChip socket (U4)..............................................41
DiskOnChip (DOC) 2000 Installation..........................42
Chapter 3: Award BIOS Setup .........................................43
Starting setup ...............................................................44
Setup keys.....................................................................45
Getting help...................................................................46
In case of problem............................................................46
Main setup menu..........................................................47
Standard CMOS setup..................................................49
BIOS features setup ........................................................... 56
CHIPSET features setup..............................................61
Power management setup.............................................63
PNP/PCI congfiguration setup......................................66
Load BIOS defaults/Load setup defaults......................68
Integrated peripherals setup........................................69
Supervisor/User password setting ...............................72
IDE HDD auto detection..............................................74
Save & exit setup.........................................................75
Exit without saving.........................................................76
Chapter 4: C&T 69000 Flat Panel/CRT controller Display
Drivers and Utilities ..................................77
Software drives..............................................................78
Hardware configuration.....................................................78
Necessary prerequisites....................................................79
Before you begin..............................................................79
Windows 95/98..............................................................80
Driver installation.............................................................80
Windows 3.1..................................................................86
Driver installation.............................................................86
OS/2...............................................................................87
Windows NT 3.51..........................................................89
Driver installation.............................................................89
Windows NT 4.0............................................................90
Driver installation.............................................................90
Chapter 5: Ethernet Software configuration .....................
.....................................................................93
Win9X/NT Ethernet Installation...................................92
Ethernet Software Configuration..................................93
Indice
Altri manuali EMAC Scheda madre
EMAC
EMAC PCM-4896L Manuale utente
EMAC
EMAC PCM-6892E Manuale utente
EMAC
EMAC MicroPac 535 Guida rapida per l'utente
EMAC
EMAC PCM-53E52 Manuale utente
EMAC
EMAC SBC-557 Manuale utente
EMAC
EMAC PCA-6782 Manuale utente
EMAC
EMAC SoM-iMX6U Manuale utente
EMAC
EMAC SBC-675 Manuale utente
EMAC
EMAC iPac HCS12 Manuale utente
EMAC
EMAC PCA-6003 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
