Emerson Rosemount 2230 Manuale utente
Quick Start Guide
00825-0100-2230, Rev AA
June2023
Rosemount™ 2230 Graphical Field
Display
Contents
About this guide...........................................................................................................................3
Overview....................................................................................................................................... 6
General information.................................................................................................................... 9
Installation.................................................................................................................................. 10
Configuration and operation....................................................................................................26
Quick Start Guide June2023
2 Emerson.com/Rosemount
1 About this guide
This Quick Start Guide provides basic guidelines for installation and
configuration of the Rosemount 2230 Graphical Field Display.
NOTICE
Read this manual before working with the product. For personal and
system safety, and for optimum product performance, make sure
you thoroughly understand the contents before installing, using, or
maintaining this product.
For equipment service or support needs, contact your local Emerson
representative.
Spare Parts
Any substitution of non-recognized spare parts may jeopardize
safety. Repair, e.g. substitution of components etc, may also
jeopardize safety and is under no circumstances allowed.
Rosemount Tank Radar AB will not take any responsibility for faults,
accidents, etc caused by non-recognized spare parts or any repair
which is not made by Rosemount Tank Radar AB.
NOTICE
The products described in this document are NOT designed for
nuclear-qualified applications. Using non-nuclear qualified products
in applications that require nuclear-qualified hardware or products
may cause inaccurate readings. For information on Rosemount
nuclear-qualified products, contact your local Emerson Sales
Representative.
WARNING
WARNING - Substitution of components may impair Intrinsic Safety.
WARNING - To prevent ignition of flammable or combustible
atmospheres, disconnect power before servicing.
AVERTISSEMENT - La substitution de composants peut compromettre
la sécurité intrinsèque.
AVERTISSEMENT - Ne pas ouvrir en cas de presence d'atmosphere
explosive.
June2023 Quick Start Guide
Quick Start Guide 3
WARNING
Failure to follow safe installation and servicing guidelines could
result in death or serious injury.
Ensure only qualified personnel perform the installation.
Use the equipment only as specified in this manual. Failure to do so
may impair the protection provided by the equipment.
Do not perform any service other than those contained in this
manual unless you are qualified.
To prevent ignition of flammable or combustible atmospheres,
disconnect power before servicing.
Substitution of components may impair Intrinsic Safety.
WARNING
Explosions could result in death or serious injury
Verify that the operating environment of the gauge is consistent with
the appropriate hazardous locations certifications.
Before connecting a handheld communicator in an explosive
atmosphere, ensure that the instruments are installed in accordance
with intrinsically safe or non-incendive field wiring practices.
Do not remove the instrument cover in explosive atmospheres when
the circuit is live.
WARNING
High voltage that may be present on leads could cause electrical
shock.
Avoid contact with the leads and terminals.
Make sure the main power to the Rosemount 2410 Tank Hub is off
and the lines to any other external power source are disconnected or
not powered while wiring the device.
WARNING
Electrical shock could cause death or serious injury.
Use extreme caution when making contact with the leads and
terminals.
Quick Start Guide June2023
4 Emerson.com/Rosemount
WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to
and/or misconfiguration of end users’ equipment. This could be
intentional or unintentional and needs to be protected against.
Physical security is an important part of any security program and
fundamental in protecting your system. Restrict physical access by
unauthorized personnel to protect end users’ assets. This is true for
all systems used within the facility.
June2023 Quick Start Guide
Quick Start Guide 5
2 Overview
2.1 Components
Figure 2-1: Rosemount 2230 Components
A
E
F
I
B
C
GH
D
A. Weather protection lid(1)
B. Display
C. Menu
D. Soft keys
E. Activity indicator
F. Cover screw (x6)
G. Cable entries: two ½ - 14 NPT (optional: adapters for two M20 x
1.5)
H. Ground screw
I. Clip for locking the weather protection
2.2 Getting started
2.2.1 System start-up
The standard start-up procedure of a Rosemount Tank Gauging
system that includes devices such as the Rosemount 2460
System Hub, Rosemount 2410 Tank Hub, Rosemount 5900S Radar
Level Gauge, and the Rosemount 2240S Multi-input Temperature
Transmitter can be summarized as follows:
Procedure
1. Install the devices on the appropriate locations.
(1) It is recommended that the lid is closed whenever possible to protect the LCD
from exposure by ultraviolet radiation from the sun.
Quick Start Guide June2023
6 Emerson.com/Rosemount
2. Assign Modbus addresses(2) for the Rosemount 2410 Tank
Hub, for level gauges such as the Rosemount 5900S Radar
Level Gauge, and for auxiliary tank devices (ATD) such as the
Rosemount 2240S Multi-input Temperature Transmitter. The
Modbus addresses will be stored in the built-in databases
of the Rosemount 2410 Tank Hub and the Rosemount 2460
System Hub.
3. Verify that the total current consumption of devices connected
to the Tankbus does not exceed 250 mA(3). In an Emerson
Wireless system the maximum current is 200 mA.
4. Wire the devices.
a) Connect field devices to the Tankbus.
Note
Devices must be configured in the tank database(2)(3) of
the Rosemount 2410 Tank Hub in order to be able to
communicate on the Tankbus.
b) Connect the Rosemount 2410 Tank Hub to the
Rosemount 2460 System Hub.
c) Connect the Rosemount 2460 System Hub to the
control room PC with TankMaster software. The 2460
may be connected via a Rosemount 2180 Field Bus
Modem, or directly via RS 232 or RS 485.
5. Install the TankMaster software in the control room PC.
6. Configure the devices by using the TankMaster WinSetup
configuration tool as described in the Rosemount Tank
Gauging System Configuration Manual (Document no.
00809-0300-5100).
2.2.2 Start-up in a FOUNDATION™ Fieldbus system
To start up Rosemount Tank Gauging devices in a FOUNDATION
Fieldbus system:
Procedure
1. Prepare the start-up by recording information that will be
needed for configuration of various field devices as described
in the Rosemount Tank Gauging System Configuration
manual. This may for example include tank geometry,
(2) See the Rosemount Tank Gauging System Configuration Manual (Document
no. 00809-0300-5100) for more information.
(3) See the Rosemount 2410 Tank Hub Reference Manual (Document No.
00809-0100-2410) for more information.
June2023 Quick Start Guide
Quick Start Guide 7
antenna type, number of temperature elements and other
configuration parameters.
2. Connect the field devices, such as the Rosemount 5900S
Radar Level Gauge and the Rosemount 2240S Multi-input
Temperature Transmitter, to the FOUNDATION Fieldbus network.
3. Configure the field devices by using AMS Device Manager (or
any other FOUNDATION Fieldbus host supporting DD4).
See the Reference Manual for the respective field device and
the Rosemount Tank Gauging System Configuration Manual
(Document No. 00809-0300-5100) for more information on
how to configure various Rosemount Tank Gauging devices.
Quick Start Guide June2023
8 Emerson.com/Rosemount
3 General information
3.1 Service support
For service support contact the nearest Emerson Automation
Solutions /Rosemount Tank Gauging representative. Contact
information can be found on the web site www.Emerson.com.
3.2 Product certifications
See the Rosemount 2230 Product Certifications document for
detailed information on the existing approvals and certifications.
3.3 Product recycling/disposal
Recycling of equipment and packaging should be taken into
consideration and disposed of in accordance with local and national
legislation/regulations.
June2023 Quick Start Guide
Quick Start Guide 9
4 Installation
4.1 Installation considerations
The Rosemount 2230 Graphical Field Display can be installed either
on the tank roof or at the foot of the tank for a flexible and
convenient read-out of tank data.
The Rosemount 2230 is designed for mounting on a wall or a pipe.
It is important to provide space for opening the weather protection
lid which prevents degradation of the LCD display due to sunlight
exposure.
Consider the following when finding an appropriate location for the
Rosemount 2230 Graphical Field Display:
•Mount the Rosemount 2230 in a location where it is protected
from excessive sunlight. This will reduce exposure to ultra violet
(UV) radiation and extend the life-time of the LCD.
•In case the LCD can not be protected from sunlight and UV
radiation, it is recommended that the weather protection lid is
closed whenever the Rosemount 2230 is not used.
•An external weather protection is recommended to protect the
LCD from sunlight and UV radiation in order to extend its life-
time. A weather protection can be sourced locally or ordered from
factory.
•When mounting the Rosemount 2230 display ensure that
sufficient space is provided for opening the lid, see Figure 4-1.
Quick Start Guide June2023
10 Emerson.com/Rosemount
Altri manuali per Rosemount 2230
2
Indice
Altri manuali Emerson Strumento di misura
Emerson
Emerson Rosemount 2090P Manuale utente
Emerson
Emerson FB1200 Manuale utente
Emerson
Emerson Rosemount 485 Annubar Manuale utente
Emerson
Emerson ControlWave EFM 4710A Manuale utente
Emerson
Emerson FB1100 Manuale utente
Emerson
Emerson Rosemount Analytical CAT 100 Manuale utente
Emerson
Emerson Rosemount Analytical 1054B C Manuale utente
Emerson
Emerson Rosemount 2410 Manuale utente
Emerson
Emerson Rosemount 2051 Wireless Series Manuale utente
Emerson
Emerson 56WM WirelessHART SensEnable Manuale utente
Emerson
Emerson Micro Motion 7835 Manuale utente
Emerson
Emerson ControlWave EFM Manuale utente
Emerson
Emerson Rosemount 8800D Series Manuale utente
Emerson
Emerson Rosemount Analytical 385+ Manuale utente
Emerson
Emerson Rosemount 3051 Manuale utente
Emerson
Emerson ENARDO ES-660-HF Manuale utente
Emerson
Emerson Rosemount 1057 Manuale utente
Emerson
Emerson Rosemount 1054B Manuale utente
Emerson
Emerson Rosemount Wireless Pressure Gauge Manuale utente
Emerson
Emerson Rosemount Analytical RDO Manuale utente
