eqss Gen-3 LMS Manuale utente
EQUIPMENT SAFETY SYSTEMS PTY LTD
eqss™ Gen-3 LMS
Telehandler Load Management System
Installation Manual for T40180
VER: 1906121521
Failure To Follow Installation Manual Will Void Warranty
Do Not Swap Components between Gen3-LMS kits
When installing multiple Gen3-LMS kits, make sure the serial number
on the sticker matches the serial number on the machine.
Documentation Conventions
The list below highlights important do umentation onventions.
VER: 1906121521 2 of 59
Text presented in this manner is intended to provide the user
with some general information. The user should ensure
information presented in this manner is clearly understood.
Text presented in this manner provides the user with
information to assist in completion of the current procedure
being explained.
Text presented in this manner indicates that a failure to follow
directions could result in damage to equipment, loss of
information, bodily harm, or loss of life.
Important Information
Information ontained in this publi ation regarding this devi e's appli ations and the like is
provided only for your onvenien e and may be superseded by updates. It is your
responsibility to ensure that the appli ation or our equipment meets with your
spe ifi ations.
EQUIPMENT SAFETY SYSTEMS MAKE NO REPRESENTATIONS OR WARRANTIES
OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY
OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED
TO, IT'S CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS
FOR PURPOSE.
Equipment Safety Systems dis laims all liability arising from this information and its use.
Use of Equipment Safety Systems’ produ ts as riti al omponents in life support systems
is not authorised ex ept with express written approval by Equipment Safety Systems. No
li enses are onveyed, impli itly or otherwise, under any Equipment Safety Systems
intelle tual property rights.
VER: 1906121521 3 of 59
Table of Contents
Tools Required for Installation.....................................................................................5
Installation Index...........................................................................................................6
overs.........................................................................................................................10
able Reeler Installation.............................................................................................12
able Reeler Mounting Position.............................................................................16
Pressure Sensor Installation.......................................................................................17
Pressure Manifold...................................................................................................17
ompensation Pressure Sensors............................................................................19
Reverse amera..........................................................................................................21
an Pressure Input Module ( PIM)............................................................................23
Signal Light Installation..............................................................................................24
Stabiliser onnections................................................................................................27
Forward amera..........................................................................................................28
External able ompletion.........................................................................................30
Display Installation......................................................................................................33
User Input ontrol.......................................................................................................35
an abin Interface Module ( IM)...........................................................................36
Machine onnections..................................................................................................37
abin Loom..................................................................................................................40
Finalisation..................................................................................................................43
Set Time & Sensor alibration...................................................................................46
Schematics...................................................................................................................49
Appendix A: Attaching Display onnectors...............................................................53
Appendix B: Reattach Ferrites...................................................................................57
VER: 1906121521 4 of 59
Indexes and Tables.....................................................................................................58
Tools Required for Installation
The tools required to perform the installation of the TSS are listed below
•Pen il or Texta
•Drill
•Drill bits
◦3.3 mm
◦4.5 mm
◦5 mm
◦6.8 mm
◦8.5 mm
•Centre pun h
•Tap T-Handle
•Taps
◦M6
◦M8
•Drill and tap oil
•Metri Allen keys
•Phillips Head s rew driver
•Spanners and so kets
◦7 mm
◦10 mm
◦13 mm
•Lo ktite thread lo ker
•Side utters
•Stanely knife
•Crimpers
•Wire strippers
•Torque Wren h
VER: 1906121521 5 of 59
Installation Index
The omponents and ables of the Gen-3 Telehandler Load Management System are
outline in the tables below. The following pages show where the omponents are installed
and the able routing.
See the appropriate manual se tion for a detailed installation des ription for ea h
omponent.
Refer to this section for any component placement or cable
routing issues
Item omponent Description
1 able Reeler
2 Main Lift ylinder Pressure Sensors
3 ompensation ylinder Pressure Sensors
4 an Pressure Input Module ( PIM)
5 utout onnection
6 Lock Pin Release onnection
7 Forward amera
8 Signal Light
9 Rear amera
10 Stabiliser Switches
Table 1: Component Installation Index
VER: 1906121521 6 of 59
olour able Description
Light Purple Boom able
Dark Green Main ylinder Pressure Sensor ables
Dark Blue ompensation ylinder Pressure Sensors ables
Red utout Harness
Orange Lock Pin Release Harness
Light Green Forward amera able
Brown Signal Light able
Light Blue Rear amera able
Dark Purple IM able
Dark Brown Stabiliser Harness
Table 2: Cable Installation Index
VER: 1906121521 7 of 59
Altri manuali per Gen-3 LMS
11
Indice
Altri manuali eqss Sistema di controllo
eqss
eqss OverWatch 6253 Manuale utente
eqss
eqss OverWatch 6253 Manuale utente
eqss
eqss OverWatch 6253 Manuale utente
eqss
eqss Overwatch JLG ES Series Manuale utente
eqss
eqss Gen-3 LMS Manuale utente
eqss
eqss Gen-3 LMS Manuale utente
eqss
eqss Genie GEN-5 Series Manuale utente
eqss
eqss OverWatch 6253 Manuale utente
eqss
eqss Gen-3 LMS Manuale utente
eqss
eqss OverWatch JLG 94RT Series Manuale
eqss
eqss Gen-3 LMS Manuale utente
eqss
eqss OverWatch 6253 Manuale utente
eqss
eqss OverWatch Dingli ACE Series Manuale utente
eqss
eqss OverWatch Dingli S03-ACE Series Manuale utente
eqss
eqss OverWatch Skyjack SJ12 Manuale utente
eqss
eqss OverWatch Genie GR-12 Manuale utente
eqss
eqss OverWatch 6253 Manuale utente
eqss
eqss OverWatch Sinoboom RD-RT Series Manuale utente
