ESAB Origo Mig 410 Manuale utente

Valid for serial no. 6270349 301 122 070104

Mig 410

Mig 510

Origo







Instruction manual

ENGLISH

-- 2 --

TOCe

1 DIRECTIVE 3........................................................

2 AFETY 3...........................................................

3 INTRODUCTION 5...................................................

3.1 Equipment 5................................................................

4 TECHNICALDATA 5.................................................

5 IN TALLATION 6....................................................

5.1 Placing 7...................................................................

5.2 Assem lyofcomponents 7...................................................

5.3 Assem lyofcounter alance 8................................................

5.4 Electricalinstallation 8.......................................................

5.5 Mainspowersupply 10........................................................

6 OPERATION 11.......................................................

6.1 Connectionandcontroldevices 11.............................................

6.2 Start 12.....................................................................

6.3 Overheatingprotection 12.....................................................

6.4 Waterconnection 12..........................................................

6.5 Waterflowguard 12..........................................................

6.6 Idlemode 12................................................................

6.7 Inductance 12...............................................................

7 MAINTENANCE 13....................................................

7.1 Inspectionandcleaning 13....................................................

7.2 Toppingupthecoolant 13.....................................................

8 FAULTTRACING 14...................................................

9 ORDERINGOF PAREPART 14......................................

DIAGRAM 15............................................................

ACCE ORIE 20.......................................................

-- 3 --

mi410,510e

1 DIRECTIVE

DECLARATION OF CONFORMITY

ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, gives its unreserved guarantee that weld-

ing power source OrigoTM Mig 410 / OrigoTM Mig 510 from serial num er 627 complies with standard

IEC/EN 60974--1, in accordance with the requirements of directive (73/23/EEC) and addendum

(93/68/EEC) and with standard IEC/EN 60974--10 in accordance with the requirements of directive

(89/336/EEC) and addendum (93/68/EEC).

--------------------------------------------------------------------------------------------------------------------------------------

Kent Eim rodt

Glo al Director Equipment and Automation

ESAB AB

695 81 LAXÅ

SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924

Laxå 2006--09--05

2 AFETY

Users of ESAB welding equipment have the ultimate responsi ility for ensuring that anyone who

works on or near the equipment o serves all the relevant safety precautions. Safety precautions

must meet the requirements that apply to this type of welding equipment. The following recommen-

dations should e o served in addition to the standard regulations that apply to the workplace.

All work must e carried out y trained personnel well--acquainted with the operation of the welding

equipment. Incorrect operation of the equipment may lead to hazardous situations which can result

in injury to the operator and damage to the equipment.

1. Anyone who uses the welding equipment must e familiar with:

Sits operation

Slocation of emergency stops

Sits function

Srelevant safety precautions

Swelding

2. The operator must ensure that:

Sno unauthorised person is stationed within the working area of the equipment when it is

started up.

Sno--one is unprotected when the arc is struck

3. The workplace must:

Se suita le for the purpose

Se free from draughts

4. Personal safety equipment

SAlways wear recommended personal safety equipment, such as safety glasses, flame--proof

clothing, safety gloves.

SDo not wear loose--fitting items, such as scarves, racelets, rings, etc., which could ecome

trapped or cause urns.

5. General precautions

SMake sure the return ca le is connected securely.

SWork on high voltage equipment may only be carried out by a qualified electrician.

SAppropriate fire extinquishing equipment must e clearly marked and close at hand.

SLu rication and maintenance must not e carried out on the equipment during operation.

-- 4 --

mi410,510e

WARNING!

Read and understand the instruction manual

efore installing or operating.

WARNING

READ AND UNDER TAND THE IN TRUCTION MANUAL BEFORE IN TALLING OR OPERATING.

ARC WELDING AND CUTTING CAN BE INJURIOU TO YOUR ELF AND OTHER . TAKE PRECAU-

TION WHEN WELDING. A K FOR YOUR EMPLOYER’ AFETY PRACTICE WHICH HOULD BE

BA ED ON MANUFACTURER ’ HAZARD DATA.

ELECTRIC HOCK -- Can kill

SInstall and earth the welding unit in accordance with applica le standards.

SDo not touch live electrical parts or electrodes with are skin, wet gloves or wet clothing.

SInsulate yourself from earth and the workpiece.

SEnsure your working stance is safe.

FUME AND GA E -- Can be dangerous to health

SKeep your head out of the fumes.

SUse ventilation, extraction at the arc, or oth, to take fumes and gases away from your reathing zone

and the general area.

ARC RAY -- Can injure eyes and burn skin.

SProtect your eyes and ody. Use the correct welding screen and filter lens and wear protective

clothing.

SProtect ystanders with suita le screens or curtains.

FIRE HAZARD

SSparks (spatter) can cause fire. Make sure therefore that there are no inflamma le materials near y.

NOI E -- Excessive noise can damage hearing

SProtect your ears. Use earmuffs or other hearing protection.

SWarn ystanders of the risk.

MALFUNCTION -- Call for expert assistance in the event of malfunction.

PROTECT YOUR ELF AND OTHER !

Do not use the power source for thawing frozen pipes.

WARNING!

This product is solely intended for arc welding.

Do not dispose of electrical equipment together with normal waste!

In o servance of European Directive 2002/96/EC on Waste Electrical and Electronic

Equipment and its implementation in accordance with national law, electrical equipment

that has reached the end of its life must e collected separately and returned to an

environmentally compati le recycling facility. As the owner of the equipment, you should

get information on approved collection systems from our local representative.

By applying this European Directive you will improve the environment and human health!

-- 5 --

mi410,510e

3 INTRODUCTION

The OrigoTM Mig 410 and OrigoTM Mig 510 are step switched power sources

designed for MIG/MAG--welding together with wire feed units OrigoTM Feed 30x,

OrigoTM Feed 48x and the most of ESAB wire feeders.

The power units are fan--cooled and equipped with thermal overload protection.

The machines can e fitted with an instrument for display of current and voltage. It

incorporates a hold function and can e cali rated.

The machines can e fitted with a flow guard.

E AB’s accessories for the product can be found on page 20.

3.1 Equipment

The power source is supplied with:

SReturn ca le 5m with return clamp

SShelf for gas cylinder

SGuide pin for wire feed unit

SInstruction manual

4 TECHNICAL DATA

OrigoTM Mig 410

Voltage 400--415V, 3∼

∼∼

∼50/60 Hz 230/400--415/500V 3∼

∼∼

∼50 Hz

230/440--460 3∼

∼∼

∼60Hz

Permissible load

at100 % duty cycle 280 A/28 V 280 A/28 V

at 60 % duty cycle 365 A/32 V 365 A/32 V

at 50 % duty cycle 400 A/34 V 400 A/34 V

etting range (DC) 50A/16,5V--400A/34V 50A/16,5V--400A/34V

Open circuit voltage 17--45 V 17--45 V

Open circuit power 360 W 360 W

with cooling unit 600 W 600 W

Efficiency at max current 71% 71%

Power factor at max current 0,98 0,98

Control voltage 42 V, 50/60 Hz 42 V, 50/60 Hz

Dimensions lxwxh 812 x 552 x 925 812 x 552 x 925

Weight 144 kg 145 kg

with cooling unit 158 kg 158 kg

Operating temperature --10 to +40oC --10 to +40oC

Enclosure class IP 23 IP 23

Application classification

-- 6 --

mi410,510e

OrigoTM Mig 510

Voltage 400--415V, 3∼

∼∼

∼50/60 Hz 230/400--415/500V 3∼

∼∼

∼50 Hz

230/440--460 3∼

∼∼

∼60Hz

Permissible load

at100 % duty cycle 390 A/33,5 V 390 A/33,5 V

at 60 % duty cycle 500 A/39 V 500 A/39 V

etting range (DC) 50A/16,5V--500A/39V 50A/16,5V--500A/39V

Open circuit voltage 17--50 V 17--50 V

Open circuit power 440 W 440 W

with cooling unit 620 W 620 W

Efficiency at max current 82% 82%

Power factor at max current 0,92 0,92

Control voltage 42 V, 50/60 Hz 42 V, 50/60 Hz

Dimensions lxwxh 812 x 552 x 925 812 x 552 x 925

Weight 214 kg 215 kg

with cooling unit 228 kg 229 kg

Operating temperature --10 to +40oC --10 to +40oC

Enclosure class IP 23 IP 23

Application classification

Duty cycle

The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-

tain load without overloading.

Enclosure class

The IP code indicates the enclosure class, i. e. the degree of protection against penetration y solid

o jects or water. Equipment marked IP23 is designed for indoor and outdoor use.

Application class

The sym ol indicates that the power source is designed for use in areas with increased

electrical hazard.

5 IN TALLATION

The installation must be executed by a professional.

Note!

Connect the power source to the electricity mains with a network impedance of 0.230

Ω

(Mig 410w),

0.1

Ω

(Mig 10w) or lower. If the network impedance is higher, there is a risk of flicker in the illuminators.

WARNING!

This product is intended for industrial use. In a domestic environment this product may cause radio

interference. It is the user’s responsi ility to take adequate precautions.

The power supply should e lifted y means of its lifting

eye. The handle is only intended for pulling it along the

ground.

Lifting instructions

-- 7 --

mi410,510e

5.1 Placing

Position the welding power source such way that its cooling air inlets and outlets are

not o structed.

5.2 Assembly of components

During transport, the rear wheels of the power source are in their forward position.

Before use, place the wheels in their rear position.

WARNING!

-- 8 --

mi410,510e

5.3 Assembly of counter balance

Assem le the sta ilizer + CB KIT if the counter alance is to e installed on machine.

The sta ilizer + CB KIT is an accessory. Ordering num er you can find on page 21.

Attention! Utilization of counter alance without sta ilizer may cause the machine

tipping over.

5.4 Electrical installation

OrigoTM Mig 410

-- 9 --

mi410,510e

OrigoTM Mig 510

-- 10 --

mi410,510e

5.5 Mains power supply

Check that the unit is connected to the correct mains power supply voltage, and that it is protected y

the correct fuse size. A protective earth connection must e made, in accordance with regulations.

Rating plate with supply connection data

OrigoTM Mig 410 3∼50 Hz 3∼50/60 Hz 3∼50 Hz 3∼60 Hz 3∼60 Hz

Voltage V 230 400/415 500 230 440/460

Current A

at100% duty cycle 28 16 13 28 14

at 60% duty cycle 42 24 19 41 21

at 50% duty cycle 45 28 20 45 22

Cable area mm2

24 x 6 4 x 2,5 4 x 2,5 4 x 6 4 x 2,5

Fuse, slow A 25 20 20 25 20

OrigoTM Mig 510 3∼50 Hz 3∼50/60 Hz 3∼50 Hz 3∼60 Hz 3∼60 Hz

Voltage V 230 400/415 500 230 440/460

Current A

at100% duty cycle 43 25 20 43 23

at 60% duty cycle 68 39 31 68 35

Cable area mm2

24 x 16 4 x 6 4 x 6 4 x 16 4 x 6

Fuse, slow A 63 35 35 63 25

NB The mains cable areas and fuse sizes as shown above are in accordance with Swedish

regulations. They may not be applicable in other countries: make sure that the cable area and fuse

sizes comply with the relevant national regulations.

Altri manuali per Origo Mig 410

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ESAB Sistema di saldatura

ESAB

ESAB Rogue EM 190 PRO Manuale utente

ESAB

ESAB Aristo WeldCloud Mig U5000i Manuale utente

ESAB

ESAB Migmaster 300i cvcc Manuale di installazione e d'uso

ESAB

ESAB Smashweld 316 Manuale utente

ESAB

ESAB ES 180i Manuale utente

ESAB

ESAB Multimaster 260 Manuale utente

ESAB

ESAB POWERCUT-1500 Manuale utente

ESAB

ESAB R-50 Series Manuale utente

ESAB

ESAB MEK 4C Manuale utente

ESAB

ESAB Mig 4004i Manuale utente

ESAB

ESAB LAE 800 Manuale utente

ESAB

ESAB Rustler EM 280C PRO Manuale utente

ESAB

ESAB Caddyt Tig 150i Manuale utente

ESAB

ESAB Tig 4000i Aristo Manuale utente

ESAB

ESAB Super Bantam 225 AC Manuale utente

ESAB

ESAB EPP-200 Manuale utente

ESAB

ESAB Aristo YardFeed 2000 Manuale utente

ESAB

ESAB Warrior 400i CC Manuale utente

ESAB

ESAB LKA 150 Manuale utente

ESAB

ESAB Caddy Arc 251i Manuale utente

ESAB

ESAB ESABMig 325 Manuale utente

ESAB

ESAB ESABMig C280 Manuale utente

ESAB

ESAB PT-26 Manuale utente

ESAB

ESAB Aristo RoboFeed 3004w Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuale utente