ETC Source Four Zoom Manuale utente

Part Number: 7060M2550-06.01 Rev: B

Released: 2019-08

Source Four Zoom

Assembly Guide

Production Dates: September 2004–Present

To view a list of ETC trademarks and patents, go to

etcconnect.com/ip

. All other trademarks, both

marked and not marked, are the property of their respective owners.

ETC intends this document, whether printed or electronic, to be provided in its entirety.

Table of Contents i

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Document Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Help from ETC Technical Services . . . . . . . . . . . . . . . . . . . . . . .2

15°–30° Basic Fixture . . . . . . . . . . . . . . . . . . . . . . 3

25°–50° Basic Fixture . . . . . . . . . . . . . . . . . . . . . . 4

Assembling Basic Fixture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Lamp Socket Assembly . . . . . . . . . . . . . . . . . . . . 5

Assemble lamp socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Reflector Housing Assembly . . . . . . . . . . . . . . . .9

Removing reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Installing reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Cleaning reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Front Barrel Assembly . . . . . . . . . . . . . . . . . . . .11

Assemble front barrel assembly . . . . . . . . . . . . . . . . . . . . . . .12

15°–30° Lens Tube . . . . . . . . . . . . . . . . . . . . . . .14

15°–30° Lens tube assembly . . . . . . . . . . . . . . . . . . . . . . . . . .15

15°–30° Gel frame endcap assembly . . . . . . . . . . . . . . . . . . .15

15°–30° Front lens assembly . . . . . . . . . . . . . . . . . . . . . . . . . .15

15°–30° Rear lens assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .15

25°–50° Lens Tube . . . . . . . . . . . . . . . . . . . . . . .16

25°–50° lens tube assembly. . . . . . . . . . . . . . . . . . . . . . . . . . .17

25°–50° Gel frame endcap assembly . . . . . . . . . . . . . . . . . . .17

25°–50° Front lens assembly . . . . . . . . . . . . . . . . . . . . . . . . . .17

25°–50° Rear lens assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Assemble lens tube (15°–30° and 25°–50°) . . . . . . . . . . . . . .18

Cleaning glass lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ii Source Four Zoom Assembly Guide

Introduction 1

Introduction

Welcome to the

Source Four Zoom Assembly Guide

Please note that the part numbers listed in this guide may differ from the parts required for

your particular Source Four fixture. Part numbers for fixtures change occasionally as parts are

replaced or upgraded.

To ensure that you are ordering the proper part for your specific fixture, please contact your

ETC dealer, or ETC Customer Service for assistance.

Document Conventions

This document uses the following conventions to draw your attention to important

information.

All ETC documents are available for free download from our website: etcconnect.com.

Please email comments about this manual to: [email protected].

Note:

Notes are helpful hints and information that is supplemental to the main text.

CAUTION:

A Caution statement indicates situations where there may be undefined or

unwanted consequences of an action, potential for data loss or an equipment

problem.

WARNING: A Warning statement indicates situations where damage may occur, people

may be harmed, or there are serious or dangerous consequences of an action.

WARNING: RISK OF ELECTRIC SHOCK! This warning statement indicates situations where

there is a risk of electric shock.

2Source Four Zoom Assembly Guide

Help from ETC Technical Services

If you are having difficulties, and your problem is not addressed by this document, try the ETC

support website at support.etcconnect.com or the main ETC website at etcconnect.com. If

none of these resources are sufficient, contact ETC Technical Services directly at one of the

offices identified below. Emergency service is available from all ETC offices outside of normal

business hours.

When calling for help, take these steps first:

• Prepare a detailed description of the problem

• Go near the equipment for troubleshooting

• Find your notification number if you have called in previously

Americas United Kingdom

ETC, Inc. ETC Ltd - UK

Technical Services Department Technical Services Department

3031 Pleasant View Road 26-28 Victoria Industrial Estate

Middleton, WI 53562 Victoria Road,

800-775-4382 (USA, toll-free) London W3 6UU England

+1-608 831-4116 +44 (0)20 8896 1000

[email protected] te[email protected]

Asia Germany

ETC Asia ETC GmbH

Technical Services Department Technical Services Department

Room 1801, 18/F Ohmstrasse 3

Tower 1, Phase 1 Enterprise Square 83607 Holzkirchen, Germany

9 Sheung Yuet Road +49 (80 24) 47 00-0

Kowloon Bay, Kowloon, Hong Kong [email protected]

+852 2799 1220

[email protected]

France

ETC France

62-64 rue Danielle

Casanova

Saint-Denis Cedex

F93200

+33 1 4243 3535

[email protected]

15°–30° Basic Fixture 3

15°–30° Basic Fixture

Reference

Number

Part

Number Description Quantity

Required

1 7060A2030 15°–30° lens tube 1

2 7060A2020 Reflector housing assembly, double clutch 1

3 7060A2008 Lamp socket assembly 1

4 7060A4008-01 Knob set with male insert 1

5 7060A4037 Handle, insulated rear 1

6 HW5197 Screw, 1/4-20 x 5/8, black zinc 1

7 HW2181 Screw, 6-32 x 3/4, black Taptite 4

8See

page 11

Front barrel assembly

Optional

9 7060A2028 Balance Yoke 1

Figure 1

4Source Four Zoom Assembly Guide

25°–50° Basic Fixture

Assembling Basic Fixture

1: Follow instructions under

Assemble lamp socket

page 6

2: Follow instructions under

Installing reflector

page 10

3: Follow instructions under

Assemble front barrel assembly

page 12

4: Follow instructions under

Assemble lens tube (15°–30° and 25°–50°)

page 18

5: Insert lens tube assembly (1) fully into the reflector housing assembly (2). Turn lens tube assembly

1/4 turn and align the two mounting holes. Secure with screw (6) on top, and knob (4) on

bottom. Tighten both securely. See

Figure 1

Figure 2

6: Install the lamp socket assembly (3) to the reflector housing (2) and secure with brass knurled

screw on rear of lamp socket assembly.

7: Release the gel retaining clip by pushing it sideways while gently pulling backwards.

8: Insert the color frame.

9: Lock the clip by pushing sideways while gently pushing it forward.

Reference

Number

Part

Number Description Quantity

Required

1 7060A2032 25°–50° lens tube 1

2 7060A2020 Reflector housing assembly, double clutch 1

3 7060A2008 Lamp socket assembly 1

4 7060A4008-01 Knob set with male insert 1

5 7060A4037 Handle, insulated rear 1

6 HW5197 Screw, 1/4-20 x 5/8, black zinc 1

7 HW2181 Screw, 6-32 x 3/4, black Taptite 4

Figure 2

Lamp Socket Assembly 5

Lamp Socket Assembly

Reference

Number

Part

Number Description Quantity

Required

1 7060A3055 Housing, socket, casting, painted 1

2 7060A3007 Socket, light baffle casting, raw 1

3 7060A4007 Knob, X-Y, lamp set 1

4 7060A4008-02 Knob, Z, lamp set w/female insert 1

5 7060A4011 Bushing, cup 1

6 7060A3011 Hub, index, casting 1

7 7060A3012 Spring, lamp retainer 1

8 HW748 Spring, compression 1

9 7060B7019 Complete UL socket assembly 1

10 HW534 Nut, hex, 1/4-20, black zinc 1

11 7060A3025 Screw, 1/4-20 knurled head 1

12 HW746 Retaining ring, flat, Southco 1

13 HW5123 Nut, hex, 9/16-18, black zinc 1

14 HW747 Washer, wave 1

15 7060A3056 Clamp, strain relief, painted 1

16 HW3103 Screw, 8-32 x 5/8 PhFHMS, black zinc 2

17 HW5122 Bolt, 1/4-20 x 1.75, full thread, black zinc 1

18 HW8209 Clip Tinnerman 1

19 7060B7003 48" W420 wire, 16 gauge, 200° C/300V, green UL

1180/CSA AWM with lug J490T installed 1

20 W6195 36" sleeve, fiberglass 1

21 HW749 Spring, ground 1

22 7060B7007 4" W420 wire, 16 gauge, 200° C/300V, green, UL

1180/CSA AWM with two J490T lugs installed 1

23 7060A4037 Handle, insulated rear, black 1

24 HW2181 Screw, 6-32 x 3/4, Taptite 4

25 7060A3085 Source Four Lamp Retainer Wire 1

21 9

25 17

Figure 3

6Source Four Zoom Assembly Guide

Assemble lamp socket

Tools Required:

• Open-end adjustable wrench or a 7/16” socket

• Needle-nose pliers

• #2 Phillips screwdriver

10: Set the crossbar of the retainer clip (25) under the two hooks on the clip bracket as shown in

Figure 4

11: Place the Tinnerman clip (18) over the retainer clip crossbar between the two hooks and press it

down firmly until it snaps into place.

12: Insert the bolt (17) through the light baffle socket casting (2). See

Figure 5

13: Install the green ground wire assemblies (19 and 22) on the bolt (17) with the prongs on the

crimped connectors toward the casting. Run both wires through the indent in the lip around the

bolt hole. Secure with nut (10) and tighten securely (60 inch pounds).

14: Place the socket assembly (9) into the light baffle socket casting (2). Be sure it is well seated.

15: Install the lamp retainer spring (7). The lamp retainer spring secures the socket. Insert the spring

one end at a time, making sure the rectangular slot in each side of the spring seats on the

corresponding tab in the casting.

Note:

If the spring does not seat correctly, coax it into place with a screwdriver or needle-

nose pliers.

Figure 4

Figure 5

Altri manuali per Source Four Zoom

Indice

Altri manuali ETC Attrezzatura per DJ

ETC

ETC ColorSource CYC Manuale utente

ETC

ETC Source Four PAR Manuale utente

ETC

ETC ColorSource Spot jr v2.0 Manuale utente

ETC

ETC Source Four Mini LED Manuale utente

ETC

ETC Source Four LED Series Manuale utente

ETC

ETC Irideon FPZ Manuale utente

ETC

ETC RoadHog 4 Manuale utente

ETC

ETC Irideon WLZ Manuale utente

ETC

ETC fos/4 Series Manuale utente

ETC

ETC Releve Spot Manuale utente

ETC

ETC ColorSource Spot Pearl v1.7 Manuale utente

ETC

ETC SolaPix 19 XT Manuale utente

ETC

ETC ColorSource Manuale utente

ETC

ETC CE Source Four Guida alla configurazione

ETC

ETC Source 4WRD II Manuale utente

ETC

ETC Ion Classic Manuale utente

ETC

ETC Source 4WRD Manuale utente

ETC

ETC Congo jr Master Playback Wing Manuale utente

ETC

ETC Source 4WRD Manuale utente

ETC

ETC ColorSource Spot Manuale utente

ETC

ETC Source Four XT HID Zoom Grid Louver Manuale utente

ETC

ETC Source Four PARN Manuale utente

ETC

ETC ColorSource Spot V 1.0 Manuale utente

ETC

ETC ColorSource Linear Pearl Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente