Evolis Primacy 2 SE Manuale utente

User-Guide_MDD_ENG_20220829_A

Primacy 2 SE

USER GUIDE

TABLE OF CONTENTS

Warranty 5

Environmental information 5

Recycling of end-of-life products 5

Icons 5

About your new printer 6

1. GETTING STARTED 7

Unpacking 7

Description of the printer and its functions 8

Installation 11

Connecting the Printer Power Supply Cable 11

Installing the Printer Driver 12

Connecting to a Network 13

Ribbons 14

Cards 15

Managing the rear output hopper 16

2. MANAGING PRINT SETTINGS 17

3. PRINTING AND INTERACTING WITH THE PRINTER 18

Printing a card 18

On Microsoft®Word 18

On Cardpresso (depending on the conguration of the printer) 18

On TextEdit 18

Using the control panels 19

LED Control panel 19

LCD Touchscreen 21

Pop-ups 22

THE PRINTER

TABLE OF CONTENTS

4. ADVANCED FEATURES 23

Available options 23

Duplex Printing 24

LCD Touchscreen 25

Card Lamination Module 27

Encoding Options 35

Conguring a Wi-Fi Network 38

Security Options 38

Advanced Features 39

Rewrite (Option) 39

UV Effect With The Overlay Panel 39

Color Prole 40

5. MAINTENANCE 41

Regular Cleaning 42

Printer Cleaning 43

Print Head Cleaning 43

Advanced Cleaning 44

Printer cleaning 44

Print head cleaning 44

Dust lter cleaning 45

Card Lamination Module Cleaning 45

Lamination Dust Filter Cleaning 46

THE PRINTER

TABLE OF CONTENTS

6. HELP 47

Diagnostic help 47

Printing a Technical Test Card 47

Printing a Graphical Test Card 47

Identifying Installed Software Versions 47

Troubleshooting 48

Printing problems 48

Jammed Cards 51

Replacing the print head 52

Updating the rmware 54

Updating the print driver 54

7. DECLARATIONS OF CONFORMITY 55

General 55

United-Kingdom 56

THE PRINTER

Users must observe the copyright regulations applicable in their country. This manual must not be photocopied, translated, reproduced or transmitted,

in whole or in part, for any reason and by any electronic or mechanical means whatsoever without the express written consent of Company.

All the information contained in this document is subject to change without prior notice.

Company cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or as a result of

dissemination or use of this manual.

WARRANTY

Refer to the warranty booklet delivered with the equipment for warranty terms and conditions and limitations.

ENVIRONMENTAL INFORMATION

Company is committed to helping the environment by reducing the energy consumption of its products.

RECYCLING OF END-OF-LIFE PRODUCTS

The manufacture of the equipment that you have purchased required the extraction and use of natural resources. It may contain materials that are

hazardous to health and the environment.

To prevent the dispersal of such materials into our environment and reduce the pressure on our natural resources, we recommend that you use existing

collection systems. These systems appropriately re-use or recycle most of the materials in your end-of-life equipment.

For more information on collection, re-use and recycling systems, contact your local or regional waste management body.

ICONS

The following icons are used in this manual to highlight important information:

NOTE Information providing further details or depth about specic points in the main text.

!Indicates that failing to take the recommended action is liable to damage the printer

THE PRINTER

ABOUT YOUR NEW PRINTER

Thank you for choosing an Company printer. Using your new printer, you will be able to create a wide variety of high-quality cards and badges which

can be printed in various thicknesses, colors and styles. This printer uses consumables and accessories available from Company.

Certiﬁcations and declarations of conformity:

CE, UKCA, ICES, VCCI, BIS, CCC, KC, EAC, ROHS,

FCC (Evolis contact: Evolis, Rising Sun Mills, 188 Valley St., Suite 421, RI 02909 Providence, evolisnortham@evolis.com)

Icons on the printer label:

Evaluation for apparatus only based on altitude not exceeding 2000m, therefore it’s the only operating condition applied for the

equipment. There may be some potential safety hazard if the equipment is used at altitude above 2000m.

Evaluation for apparatus only based on temperate climate condition, therefore it’s the only operating condition applied for the equipment.

There may be some potential safety hazard if the equipment is used in tropical climate region.

Reminder to use existing collection facilities.

Dimensions

•Printer (HxWxD) without locking system: 246,2x 204.95x 381.2mm

Weight

• 4.11 kg

Connectivity

•USB (1.0, 1.1, 2.0, 3.0), Ethernet, Wi-Fi (option)

Environmental Conditions

•Standard operating temperature: 15°C / 30 °C (59°F / 86°F)

•Min / Max operating temperature and humidity rate: 0° / 40° C (32°F / 104°F) and 20% to 65% non-condensing

•Min/max storage temperature: –5°C / +70°C (23°F / 158°F)

•Storage humidity: 20% to 70% without condensation

• Operating ventilation: free air

Electrical Information

• Power supply unit: 100-240 Volts AC, 50-60 Hz, 1.5A

• Printer: 24 Volts DC, 2.5A

THE PRINTER

1. GETTING STARTED

UNPACKING

Your printer is supplied with several accessories that we ask you to look at closely.

This list may vary depending on your location.

The printer is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate to contact the

shipper and immediately inform your Company dealer, who will tell you the procedure to follow.

Company takes great care over the quality of its packaging and we ask that you keep this packaging somewhere clean and dry.

The full original packaging (outer box, inner wedges and protective bags) is required in the event that the printer is returned. If the

printer is returned without its original packaging and components are damaged in transit, these components are nolonger covered

by the warranty. You will be charged for new packaging for shipping the printer back to you.

Accessories supplied with your printer:

• Power supply unit – FSP type FSP060-RAAK3

• Mains power cable

• USB cable

• Rear output hopper

• Starter cleaning kit

•Card designing software Cardpresso (depending on the conguration of the printer)

!If any of these components are missing, contact your Company dealer.

Use only the power supply unit supplied with the printer.

Use only the USB cable supplied with the printer.

NOTE The printer must be placed in a dry location, protected from dust and drafts but well-ventilated. Make sure to keep your printer on a

at, sturdy surface able to bear its weight.

THE PRINTER

DESCRIPTION OF THE PRINTER AND ITS FUNCTIONS

Access to the side panels of the machine and the option module tting/removal areas is restricted to your retailer/installer or

toexperienced users. Always disconnect the machine from the power supply (unplugged) before performing workon it.

NOTE If the printer is equipped with an LCD screen, refer to the corresponding user guide for more information.

A. Card input feeder (100 cards)

B. Internal output hopper

C. LCD Screen (option)

D. Power button

E.LED Control Panel

THE PRINTER

Protective cover

F.Place for reject box (See "Managing the rear output hopper", page 16)

G. Location for security locking (option)

H. Power cable socket

I. Ethernet connector

J. USB socket (type A)

K.USB socket (type B)

L.Cleaning Roller

M. Side panel opening mechanism

N. Thermal print head with protective cover

O. Card thickness adjustment gauge

THE PRINTER

P.Printer serial number label

Q. Dust lter

R. Location for double-sided printing activation key (option)

S.Side panel opening mechanism

THE PRINTER

Indice

Altri manuali Evolis Stampante

Evolis

Evolis Dualys Manuale utente

Evolis

Evolis Pebble Manuale dell'operatore

Evolis

Evolis tattoo rw Manuale utente

Evolis

Evolis QUANTUM Manuale utente

Evolis

Evolis Dualys Manuale utente

Evolis

Evolis DUPLIPASS Manuale utente

Evolis

Evolis Dualys 3 Manuale utente

Evolis

Evolis KC PRIME Manuale utente

Evolis

Evolis Securion Manuale utente

Evolis

Evolis PRIMACY 2 Manuale utente

Evolis

Evolis KC200 Manuale utente

Evolis

Evolis Zenius Manuale per l'uso e la cura

Evolis

Evolis Zenius Manuale utente

Evolis

Evolis Avansia Manuale utente

Evolis

Evolis AGILIA Manuale utente

Evolis

Evolis Avansia Manuale di istruzioni

Evolis

Evolis The Tattoo Rewrite Manuale utente

Evolis

Evolis Dualys Manuale utente

Evolis

Evolis KC ESSENTIAL Manuale utente

Evolis

Evolis Avansia Manuale utente

Evolis

Evolis Primacy Manuale utente

Evolis

Evolis New Pebble Manuale utente

Evolis

Evolis TattooRW Manuale utente

Evolis

Evolis Badgy Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

IRA3D

IRA3D POETRY4 Manuale utente