EXFO bv10 Manuale utente
User Guide
Performance Endpoint Unit
BV10
ii BV10
Copyright © 2010–2014 EXFO Inc. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system or transmitted
in any form, be it electronically, mechanically, or by any other means such
as photocopying, recording or otherwise, without the prior written
permission of EXFO Inc. (EXFO).
Information provided by EXFO is believed to be accurate and reliable.
However, no responsibility is assumed by EXFO for its use nor for any
infringements of patents or other rights of third parties that may result from
its use. No license is granted by implication or otherwise under any patent
rights of EXFO.
EXFO’s Commerce And Government Entities (CAGE) code under the North
Atlantic Treaty Organization (NATO) is 0L8C3.
The information contained in this publication is subject to change without
notice.
Trademarks
EXFO’s trademarks have been identified as such. However, the presence
or absence of such identification does not affect the legal status of any
trademark.
Units of Measurement
Units of measurement in this publication conform to SI standards and
practices.
December 4, 2014
Version number: 3.0.0.1
Certification Information
BV10-100 and BV10-1000 iii
Certification Information
North America Regulatory Statement
This unit was certified by an agency approved in both Canada and the
United States of America. It has been evaluated according to applicable
North American approved standards for product safety for use in Canada
and the United States.
Electronic test and measurement equipment is exempt from FCC part 15,
subpart B compliance in the United States of America and from ICES-003
compliance in Canada. However, EXFO Inc. makes reasonable efforts to
ensure compliance to the applicable standards.
The limits set by these standards are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the user guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
European Community Declaration of Conformity
An electronic version of the declaration of conformity for your product is
available on our website at www.exfo.com. Refer to the product’s page on
the Web site for details.
Laser
This product complies with 21 CFR 1040.10 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007 and with IEC/EN 60825-1.
iv BV10
Contents
Certification Information ....................................................................................................... iii
1 Introducing the BV10 ....................................................................................1
Features .................................................................................................................................1
BrixWorx for Turn Up ..............................................................................................................2
Conventions ............................................................................................................................3
2 Safety Information ......................................................................................5
Additional Laser Safety Information .......................................................................................6
Installation Instruction Warnings ............................................................................................7
Other Safety Symbols on Your Unit .........................................................................................8
3 Getting Started .............................................................................................9
Installing the BV10 in a Rack ..................................................................................................9
Connecting the Power ..........................................................................................................10
4 Physical Interfaces, LEDs, and Buttons ......................................................15
BV10 Models .......................................................................................................................15
Port Availability on BV10 .....................................................................................................16
Connecting the TEST Port Interface .......................................................................................16
Connecting the Management Interfaces ...............................................................................18
LEDs .....................................................................................................................................20
RESET and DEFAULT Buttons .................................................................................................21
5 Managing BV10 Verifier on BrixWorx ........................................................23
Configuring BV10 Verifier for BrixWorx Registry ...................................................................23
Configuring a Test .................................................................................................................24
Verifier Health Information ...................................................................................................28
6 Introducing the BV10 CLI ............................................................................29
Command Line Interface .......................................................................................................29
Connecting to the BV10 to a Console ...................................................................................30
Entering Commands .............................................................................................................33
CLI Session ............................................................................................................................37
7 CLI Command Reference ............................................................................39
Conventions ..........................................................................................................................39
Command Availability ...........................................................................................................39
Alphabetical List of CLI Commands .......................................................................................40
Operation Commands ..........................................................................................................42
Configuration Commands ....................................................................................................58
BV10-100 and BV10-1000 v
8 Test Applications ........................................................................................ 73
Smart Loopback Test .............................................................................................................74
Ping Test ...............................................................................................................................76
TWAMP Light Responder Test ...............................................................................................77
UDP Echo Responder Test .....................................................................................................78
Ethernet OAM Handling Test .................................................................................................79
9 Power Failure Recovery .............................................................................. 81
10 Maintenance ............................................................................................... 83
Cleaning LC Connectors ........................................................................................................84
Recycling and Disposal (Applies to European Union Only) ....................................................84
11 Troubleshooting ......................................................................................... 85
Solving Common Problems ...................................................................................................85
Contacting the Technical Support Group ..............................................................................86
Transportation ......................................................................................................................86
12 Warranty ..................................................................................................... 87
General Information .............................................................................................................87
Liability .................................................................................................................................88
Exclusions .............................................................................................................................89
Certification ..........................................................................................................................89
Service and Repairs ...............................................................................................................90
EXFO Service Centers Worldwide ..........................................................................................91
A Specifications ............................................................................................. 93
General Specifications .........................................................................................................93
Electrical Interface ...............................................................................................................95
Optical Interface ..................................................................................................................95
B Glossary ...................................................................................................... 97
Acronym List ........................................................................................................................97
Ethernet Cables .................................................................................................................102
Index .............................................................................................................. 105
BV10-100 and BV10-1000 1
1 Introducing the BV10
Highly cost-effective Ethernet performance monitoring device providing
complete network visibility for mobile backhaul, Carrier Ethernet, and PTN
networks.
Features
Fully integrated in EXFO’s end-to-end mobile backhaul solution for
service turn-up, troubleshooting, and performance monitoring.
Offers complete network visibility at a third of the cost of traditional
Ethernet NID solutions.
Simple and remote management for zero-truck-roll network
maintenance.
Completely standards-based, supporting Ethernet OAM, with 802.1ag
and Y.1731 message response as a performance endpoint, as well as
TWAMP (RFC 5357).
Capability to perform full-line-rate loopback from layer 2 up to layer 4
with rates of 10/100/1000 Mbit/s.
Introducing the BV10
2BV10
BrixWorx for Turn Up
BrixWorx for Turn Up
BrixWorx for Turn Up is a system designed for Turn-Up and reflector testing
with no monitoring capability. BrixWorx for Turn Up supports a central
management system, Verifier management for the supported Verifier
models, and user management. BrixWorx for Turn Up does not support
active or passive testing.
The BV10 Verifier is designed specifically for Ethernet OAM Handling, UDP
Echo Responder, TWAMP Light Responder, and Smart Loopback test
features. These features are enabled by loading the tests on the Verifier
Information page (Additional Services section) and in some cases
specifying parameters, such as a UDP Listening port for TWAMP or the
mode for Smart Loopback.
For more information, refer to the BrixWorx for Turn Up Getting Started
guide to learn more about the features of the BrixWorx for Turn Up system
and the BrixWorx User Guide to learn more about the Verifier Information
page.
Introducing the BV10
BV10-100 and BV10-1000 3
Conventions
Conventions
Before using the product described in this guide, you should understand
the following conventions:
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury. Do not proceed unless you
understand and meet the required conditions.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. Do not proceed unless you
understand and meet the required conditions.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
may result in component damage. Do not proceed unless you
understand and meet the required conditions.
IMPORTANT
Refers to information about this product you should not overlook.
Altri manuali per bv10
1
Indice
Altri manuali EXFO Strumento di misura
EXFO
EXFO FTB-5800 Manuale utente
EXFO
EXFO FTB-1v2 Pro Manuale utente
EXFO
EXFO T200S Manuale utente
EXFO
EXFO PPM1 Manuale utente
EXFO
EXFO IQ Series Manuale utente
EXFO
EXFO PPM-350B Manuale utente
EXFO
EXFO PM-1100 Manuale utente
EXFO
EXFO FPM-300 Manuale utente
EXFO
EXFO EPM-50 Manuale utente
EXFO
EXFO FLS-5834A Manuale utente
EXFO
EXFO FLS-2600B Manuale utente
EXFO
EXFO FTB-5230S Manuale utente
EXFO
EXFO FTB-500 Manuale utente
EXFO
EXFO IQ-5320 Manuale utente
EXFO
EXFO VFL Manuale utente
EXFO
EXFO PMD Analyzer 5500B Manuale utente
EXFO
EXFO IQS-12008 Manuale utente
EXFO
EXFO T100S-HP Series Istruzioni operative
EXFO
EXFO FTB-2 Manuale utente
EXFO
EXFO IQS-5320 Manuale utente
