Extech Instruments 461750 Manuale utente

User Manual

Mini Contact Tachometer

Model 461750

2 461750-en-US_ V2.5 11/21

Introduction

Congratulations on your purchase of the Extech Tachometer.

The Model 461750 Contact Tachometer uses convex and concave attachments to measure

RPM. It also has a built-in wheel to measure the linear surface speed of moving devices such as

conveyors and treadmills. Careful use of this tachometer will provide years of reliable service.

Meter Description

1. RPM adaptor

2. Wheel for linear surface measurements

3. Adaptor shaft

4. Adapter socket

5. Hand Guard

6. Power ON/OFF and HOLD button

7. Unit of measure selection button

8. LCD Display

9. Alternate Power ON/OFF button

Note that the battery compartment is located

on the rear of the instrument

Display Description

1. Low Battery

2. Data Hold

3. Rotations per minute

4. Meters per minute

Feet per minute

Yards per minute

3 461750-en-US_ V2.5 11/21

Safety Precautions

The 461750 incorporates a finger guard for protection. However, care should be taken when

measuring surface speed to avoid injury.

1. Hold the meter firmly when touching the wheel or attachment to a moving object

2. Keep fingers behind the finger guard while taking measurements

3. Keep your eyes and attention on the measurement activity at all times

4. Do not attempt to record measurements while holding the meter to the moving object (use the

Data Hold feature to freeze the reading on the LCD; refer to the Data Hold section of this

manual).

Meter Power

Power ON / OFF

1. Press the triangular POWER HOLD button to turn the device ON. Alternatively, press the button

at the bottom of the meter (just under the LCD) which doubles as a power on/off button. Two

buttons are provided for easy reach at any holding angle.

2. Press and hold the triangular POWER HOLD button (or the alternate button) for approx. 5

seconds to turn the device OFF.

Auto Power OFF

1. The meter turns off AUTOMATICALLY after 20 minutes.

2. For 461750 only: To disable this feature, turn the meter off. Then press and hold the POWER

and UNITS buttons until the meter turns on. Release the POWER button first and the ‘n’ display

icon will appear. This indicates that the feature is disabled.

Never dispose of used batteries or rechargeable batteries in household waste.

As consumers, users are legally required to take used batteries to appropriate

collection sites, the retail store where the batteries were purchased, or wherever

batteries are sold.

Disposal: Do not dispose of this instrument in household waste. The user is obligated to

take end-of-life devices to a designated collection point for the disposal of electrical and

electronic equipment.

4 461750-en-US_ V2.5 11/21

Measurements

RPM Measurements

Contact Tachometer

1. Affix the convex (cone) or concave (funnel) attachment that best fits the application to the

meter shaft as shown below.

2. Turn the meter ON.

3. Use the UNITS button to select RPM (the display will reflect the selection).

4. Touch the attachment to the moving object and read the displayed measurement.

Rotating

Wheel

Touch the convex or

concave attachment

to the turning object

5 461750-en-US_ V2.5 11/21

Surface Speed Measurements

1. Turn the meter on as described previously.

2. Touch the wheel to the moving object and read the measurement on the display. Refer to

diagram below.

3. Use the UNITS button to select the unit of measure: ft/min (feet per minute); m/min (meters per

minute); yds/min (yards per minute).

Data Hold Feature

After the meter is turned on, the POWER-HOLD button can be pressed and released to activate

Data Hold. Data Hold automatically freezes the displayed reading. While the reading is held, the

HOLD display icon switches on. Press the POWER-HOLD button again to exit this mode.

Maintenance

Battery Replacement

When the 9V battery weakens, the low battery indicator appears on the LCD. To replace the battery,

open the rear compartment and exchange the battery. Be sure to replace the compartment cover

securely prior to meter use.

Meter Cleaning

Wipe the meter housing with a damp cloth only. Do not use any abrasives or solvents.

Conveyor

belt

Touch wheel to moving belt

6 461750-en-US_ V2.5 11/21

Specifications

General Specifications

Display 5-digit LCD Display

Range selection Automatic range selection

Time Base 4MHz Quartz Crystal

Sampling Time 1 second (>60 rpm); >1 second (10 to 60 rpm)

Operating Temperature 32 to 122oF (0 to 50oC)

Operating Humidity 80% RH Max.

Power supply 9V Battery

Battery Life 40 hours (approx.)

Applicable standards EN 50081-1/1992 (EN 55022)

EN 50082-1/1997 (EN 55024)

Dimensions 5.9 x 2.0 x 1.3” (150 x 51 x 33mm)

Weight 5.0 oz. (142g)

Range Specifications

Measurement

Range

Accuracy

Rotation

10.000 to 9999 rpm

± (0.1% reading + 2 digits)

Surface Speed

3.0000 to 6560.0 ft/min

± (1.5% reading + 2digits)

Surface Speed

1.0000 to 1999.9 m/min

± (1.5% reading + 2digits)

1.0000 to 5000.0 yds/min

7 461750-en-US_ V2.5 11/21

Two-year Warranty

Teledyne FLIR LLC warrants this Extech brand instrument to be free of defects in parts and workmanship for

two years from date of shipment (a six-month limited warranty applies to sensors and cables). To view the full

warranty text please visit: http://www.extech.com/support/warranties.

Calibration and Repair Services

Teledyne FLIR LLC offers calibration and repair services for the Extech brand products we sell. We

offer NIST traceable calibration for most of our products. Contact us for information on calibration

and repair availability, refer to the contact information below. Annual calibrations should be

performed to verify meter performance and accuracy. Product specifications are subject to change

without notice. Please visit our website for the most up-to-date product information:

www.extech.com.

Contact Customer Support

Customer Support Telephone List: https://support.flir.com/contact

Calibration, Repair, and Returns: [email protected]

Technical Support: https://support.flir.com

www.extech.com

Indice

Altri manuali Extech Instruments Strumento di misura

Extech Instruments

Extech Instruments 407113 Manuale utente

Extech Instruments

Extech Instruments VB400 Manuale utente

Extech Instruments

Extech Instruments LT10 Manuale utente

Extech Instruments

Extech Instruments MO230 Manuale utente

Extech Instruments

Extech Instruments MO57 Manuale utente

Extech Instruments

Extech Instruments 380460 Manuale utente

Extech Instruments

Extech Instruments 461920 Manuale utente

Extech Instruments

Extech Instruments PH90 Manuale utente

Extech Instruments

Extech Instruments GRT350 Manuale utente

Extech Instruments

Extech Instruments 45160 Manuale utente

Extech Instruments

Extech Instruments 407738 Manuale utente

Extech Instruments

Extech Instruments UV510 Manuale utente

Extech Instruments

Extech Instruments 38389 Manuale utente

Extech Instruments

Extech Instruments MA410T Manuale utente

Extech Instruments

Extech Instruments VB400 Manuale utente

Extech Instruments

Extech Instruments RPM250W Manuale utente

Extech Instruments

Extech Instruments 407227 Manuale utente

Extech Instruments

Extech Instruments MO297 Manuale utente

Extech Instruments

Extech Instruments 407706 Manuale utente

Extech Instruments

Extech Instruments MO265 Manuale utente

Extech Instruments

Extech Instruments SDL400-NIST Manuale utente

Extech Instruments

Extech Instruments 407119 Manuale utente

Extech Instruments

Extech Instruments DT40M Manuale utente

Extech Instruments

Extech Instruments MA220 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente