Extech Instruments 480303 Manuale utente

480303 Ver. 1.4 9/03

User's Guide

Motor Rotation and 3-Phase Tester

Model 480303

Introduction

Congratulations on your purchase of Extech’s Motor Rotation and 3-Phase Tester. This

professional meter, with proper care, will provide years of safe reliable service.

Controls and Indicators

1. Motor Rotation Test Terminal

2. Power Indicator

3. Power Button

4. Clockwise Indicator

5. Counter Clockwise Indicator

6. 3-Phase Rotation Tester Input

7. 3-Phase Rotation Indicator

Operation

Phase Sequence Function

The Phase Sequence function determines if the 3 phases are live and the direction a motor

will turn if connected as indicated in Table 1.

1. Connect the three test leads to the power source

2. Observe that all three lights (L1, L2, L3) are active

3. Observe the directional indication lights.

4. If the direction indicated is counter-clockwise, reconnect any two wires until the

clockwise indicator is lighted.

5. If the clockwise indicator is lighted, label the power source "L1, L2, L3"

Motor Rotation Function

1. Make sure there is no voltage present.

2. Insert the test leads into the input terminals:

3. L1 - Black, L2 - Red, L3 - White. Attach the

other ends of the leads to the 3 phase motor.

4. Press and Hold the power button. The green

power indicator will light up.

5. Rotate the motor shaft clockwise (as viewed

from the end of the shaft). If the red clockwise

indicator is lit the 3-phase motor will rotate

clockwise if connected to the power supply

by the L1-L2-L3 sequence.

6. Rotate motor shaft counter-clockwise. If the

red counter-clockwise indicator is lit the 3-

phase motor will rotate clockwise if

connected to the power supply by the L1-L2-

L3 sequence.

7. If you want the motor to rotate counterclockwise, change the order of the connections to

L2-L1-L3 and the motor will rotate counter-clockwise.

480303 Ver. 1.4 9/03

Support Hotline (781) 890-7440

Tech support: Ext. 200; Email: [email protected]

Repair/Returns: Ext. 210; Email: [email protected]

Website: www.extech.com

Specifications

Signal Input Voltage 100VAC up to 660VAC max., 3 minute limit for over

500VAC. (3 phase Indicator only)

Signal Frequency Range 45 to 70 Hz

Operating Temperature 32ºF to 122ºF (0ºC to 50ºC)

Operating Humidity Less than 90% RH

Power Supply 006P DC9V battery

Power Consumption Consumption current approx. 14mA for motor rotation

field tester and 7mA per phase for rotation field indicator

Dimension 5.9 x 3.4 x 1.6” (150 x 85 x 40mm)

Weight 0.5 lbs. (230g ) without battery

Standard Accessories Test leads (red, black & white) and Instruction Manual

Maintenance

Battery Replacement

1. Replace the battery when green indicator becomes dim.

2. Open the battery cover with flat screwdriver or coin.

3. Replace the battery (006 DC9V) and reinstall the battery cover

Fuse Replacement

1. Replace fuse when red indicators fail to light.

2. Open the case and replace the 0.2A fuse.

3. Reinstall the case.

Warranty

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and

workmanship for one year from date of shipment (a six month limited warranty applies on sensors and

cables). If it should become necessary to return the instrument for service during or beyond the warranty

period, contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our

website at www.extech.com (click on ‘Contact Extech’ and go to ‘Service Department’ to request an RA

number). A Return Authorization (RA) number must be issued before any product is returned to Extech. The

sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in

transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper

wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification.

Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and

will not be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited

to repair or replacement of the product. The warranty set forth above is inclusive and no other warranty,

whether written or oral, is expressed or implied.

including the right of reproduction in whole or in part in any form.

Indice

Altri manuali Extech Instruments Apparecchiature di prova

Extech Instruments

Extech Instruments ET25 Manuale utente

Extech Instruments

Extech Instruments PRT200 Manuale utente

Extech Instruments

Extech Instruments HDV540 Manuale utente

Extech Instruments

Extech Instruments ET28B Manuale utente

Extech Instruments

Extech Instruments MG500 Manuale utente

Extech Instruments

Extech Instruments CL500 Manuale utente

Extech Instruments

Extech Instruments 380375 Manuale utente

Extech Instruments

Extech Instruments 380366 Manuale utente

Extech Instruments

Extech Instruments 382356 Manuale utente

Extech Instruments

Extech Instruments TK36 Manuale utente

Extech Instruments

Extech Instruments 422123 Manuale utente

Extech Instruments

Extech Instruments BR50 Manuale utente

Extech Instruments

Extech Instruments 381285 Manuale utente

Extech Instruments

Extech Instruments TK32 Manuale utente

Extech Instruments

Extech Instruments 407744 Manuale utente

Extech Instruments

Extech Instruments 380260-NIST Manuale utente

Extech Instruments

Extech Instruments 7630 Manuale utente

Extech Instruments

Extech Instruments ET15 Manuale utente

Extech Instruments

Extech Instruments MS420 Manuale utente

Extech Instruments

Extech Instruments ET30B Manuale utente

Extech Instruments

Extech Instruments 380260 Manuale utente

Extech Instruments

Extech Instruments prc20 Manuale utente

Extech Instruments

Extech Instruments PRC10 Manuale utente

Extech Instruments

Extech Instruments FT10 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente