Extech Instruments ET60 Manuale utente

ET60-en-US_V1.1 03/22

User Manual

Model ET60

Voltage/Continuity Tester

Introduction

The ET60 is an AC/DC Voltage tester with continuity check, NCV

detector and a work light. The attached test leads are connected

with 24” of 18-gauge wire rated at 600V. The 6” test lead

handles include spring loaded protective tip sleeves.

AC/DC Voltage

Always test on a known live circuit before use.

To check for voltage, insert test leads into outlet or carefully touch test leads

to the electrical contacts or circuit to be tested. If voltage is present, the LED

indicators will illuminate in the correct range.

Use the highest illuminated range to determine the correct voltage. If the

readings are greater than 120VAC or 48VDC, the meter will vibrate.

Non-Contact Voltage (NCV)

Always test on a known live circuit before use.

To check for non-contact voltage, place the meter near a source of electrical

energy. Press the ON/OFF button to measure NCV voltage. Note that the tip of

the meter offers the highest sensitivity. If voltage is present, the LED

indicators will illuminate.

Continuity

WARNING: To avoid electric shock, never measure continuity on circuits

that have voltage on them.

Touch the test leads to the circuit under test. The bulb at the top of the

meter will illuminate if there is continuity.

Worklight

Press the ON/OFF button to activate the work light and to measure NCV.

WARNINGS:

•Risk of Electric Shock. Always check proper operation on a known live circuit

before using.

•Never ground yourself when making electrical measurements.

•Do not use outside of rated voltages.

•Do not use in wet weather.

CAUTION: Use extreme caution when checking electrical circuits to avoid

injury due to electrical shock. FLIR Systems, Inc. assumes basic knowledge of

electricity on the part of the user and is not responsible for any injury or

damages due to improper use of this tester.

ET60-en-US_V1.1 03/22

SPECIFICATIONS

Non-Contact Voltage Range: 90~1000 volts AC

DC Voltage Range: 7 LED indicators from 6~220 volts

AC Voltage Range: 7 LED indicators from 24~600 volts

AC Voltage Frequency: 45~66 Hz

Power: Two 1.5V AAA batteries

Operating Temp.: 32~122°F (0~50°C)

Operating Humidity: 70% RH Max

Use clean, dry cloth to clean

OVERVOLTAGE CATEGORY III

Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.

Note –Examples include switches in the fixed installation and some

equipment for industrial use with permanent connection to the fixed

installation.

Double Insulation: The meter is protected by double insulation or

reinforced insulation.

File No. 3160913

ISO-9001 Certified

www.extech.com

Indice

Altri manuali Extech Instruments Apparecchiature di prova

Extech Instruments

Extech Instruments CB10 Manuale utente

Extech Instruments

Extech Instruments ET15 Manuale utente

Extech Instruments

Extech Instruments PRC15 Manuale utente

Extech Instruments

Extech Instruments 480400 Manuale utente

Extech Instruments

Extech Instruments 380395 Manuale utente

Extech Instruments

Extech Instruments MG320 Manuale utente

Extech Instruments

Extech Instruments PRC30 Manuale utente

Extech Instruments

Extech Instruments ET30B Manuale utente

Extech Instruments

Extech Instruments HDV540 Manuale utente

Extech Instruments

Extech Instruments CB10 Manuale utente

Extech Instruments

Extech Instruments BR50 Manuale utente

Extech Instruments

Extech Instruments 380375 Manuale utente

Extech Instruments

Extech Instruments MS420 Manuale utente

Extech Instruments

Extech Instruments RT30 Manuale utente

Extech Instruments

Extech Instruments 480303 Manuale utente

Extech Instruments

Extech Instruments 412300 Manuale utente

Extech Instruments

Extech Instruments BR90 Manuale utente

Extech Instruments

Extech Instruments ExStik PH150-C Manuale utente

Extech Instruments

Extech Instruments IRC350 Manuale utente

Extech Instruments

Extech Instruments MG320-NIST Manuale utente

Extech Instruments

Extech Instruments MG325 Manuale utente

Extech Instruments

Extech Instruments PRC15 Manuale utente

Extech Instruments

Extech Instruments CT70 Manuale utente

Extech Instruments

Extech Instruments 422123 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente