Extech Instruments 412300 Manuale utente

User's Guide

Model 412300 Current Calibrator with Loop Power

Model 412355 Current / Voltage Calibrator

Model 412300/355-EN V1.9 9/13

Introduction

Congratulations on your purchase of the Extech Calibrator. The Model 412300 Current Calibrator

can measure and source current. It also has 12VDC loop power for powering and measuring

simultaneously. The Model 412355 can measure and source current and voltage. The Oyster Series

meters have a convenient flip up display with neck-strap for hands-free operation. With proper care

this meter will provide years of safe, reliable service.

Specifications

General Specifications

Display 3 ½ digit LCD (2000 counts, displays 0 to 1999)

Accuracy (of reading) ± (0.075% + 1 digit) or ± 3 digits, whichever is greater

Meter Power 9 volt battery or optional AC adaptor

Loop Power 12V DC (412300 only)

Maximum Load 350 ohms at 20 mA

Dimensions 3.8 x 4.2 x 1.8" (96 x 108 x 45mm) folded

Weight 12 oz. (340g)

Accessories Supplied 9V battery and calibration cable with spade lugs

Optional Accessories AC Adaptor, NIST Certificate, and Carrying Case

Range Specifications

Model 412300 Current Calibrator

Measurement range (resolution) 0 to 50mA (0.1mA)

Output ranges (resolution) 0 to 19.99mA (0.01mA)

0 to 24.0mA (0.1mA)

-25% to +125% (0.1%) (0% = 4mA, 100% = 20mA)

Model 412355 Current and Voltage Calibrator

Measurement ranges (resolution) 0 to 50mA (0.1mA)

0 to 19.99V (0.01V)

Output ranges (resolution) 0 to 19.99mA (0.01mA))

0 to 25.0mA (0.1mA)

0 to 1999mV (1mV)

0 to 10.00V (0.01V)

Model 412300/355-EN V1.9 9/13

Meter Description

Refer to the Model 412300 diagram. The Model 412355, pictured on the front cover of this user

guide, has the same switches, connectors, jacks, etc. Operational differences are described in this

manual.

1. LCD display

2. Battery Compartment for 9V Battery

3. AC Adapter input jack

4. Calibrator cable input

5. Range switch

6. Fine output adjustment knob

7. Neck-strap connector posts

8. Calibration spade lug connectors

9. ON-OFF switch

10. Mode switch

Model 412300/355-EN V1.9 9/13

Operation

Battery and AC Adapter Power

1. This meter can either be powered by one 9V battery or an AC adapter.

2. Note that if the meter is going to be powered by the AC adapter, remove the 9V battery from the

battery compartment.

3. If the LOW BAT display message appears on the LCD display, replace the battery as soon as

possible. Low battery power may cause inaccurate readings and erratic meter operation.

4. Use the ON-OFF switch to turn the unit ON or OFF. The meter can be automatically shut off by

closing the case with the meter on.

MEASURE (Input) Mode of Operation

In this mode, the unit will measure up to 50mADC (both models) or 20VDC (412355 only).

1. Slide the Mode switch to the MEASURE position.

2. Connect the Calibration Cable to the meter.

3. Set the Range switch to the desired measurement range.

4. Connect the Calibration Cable to the device or circuit under test.

5. Turn the meter on.

6. Read the measurement on the LCD display.

SOURCE (Output) Mode of Operation

In this mode, the unit can source current up to 24mADC (412300) or 25mADC (412355). The Model

412355 can source up to 10VDC.

1. Slide the Mode switch to the SOURCE position.

2. Connect the Calibration Cable to the meter.

3. Set the Range switch to the desired output range. For the -25% to 125% output range (Model

412300 only) the output range is 0 to 24mA. Refer to the Table below.

Display -25% 0% 25% 50% 75% 100% 125%

mA output 0mA 4mA 8mA 12mA 16mA 20mA 24mA

4. Connect the Calibration Cable to the device or circuit under test.

5. Turn the meter on.

6. Adjust the fine output knob to the desired output level. Use the LCD display to verify the output

level.

Model 412300/355-EN V1.9 9/13

POWER/MEASURE Mode of Operation (412300 only)

In this mode the unit can measure current up to 24mA and power a 2-wire current loop. The maximum

loop voltage is 12V.

1. Slide the Mode switch to the POWER/MEASURE position.

2. Connect the Calibration Cable to the meter and to the device to be measured.

3. Select the desired measurement range with the range switch.

4. Turn the calibrator on.

5. Read the measurement on the LCD.

Important Note: Do NOT short the Calibration Cable leads while in the POWER/MEASURE mode.

This will cause excess current drain and may damage the calibrator. If the cable is shorted the

display will read 50mA.

Battery Replacement

When the LOW BAT message appears on the LCD, replace the 9V battery as soon as possible.

1. Open the calibrator’s lid as far as possible.

2. Open the battery compartment (shown in Meter Description section earlier in this manual) using

a coin at the arrow indicator.

3. Replace the battery and close the cover.

Model 412300/355-EN V1.9 9/13

Warranty

FLIRSystems,Inc.warrantsthisExtechInstrumentsbranddevicetobefreeofdefectsinpartsandworkmanshipforoneyear

fromdateofshipment(asixmonthlimitedwarrantyappliestosensorsandcables).Ifitshouldbecomenecessarytoreturnthe

instrumentforserviceduringorbeyondthewarrantyperiod,contacttheCustomerServiceDepartmentforauthorization.Visit

thewebsitewww.extech.comforcontactinformation.AReturnAuthorization(RA)numbermustbeissuedbeforeanyproductis

returned.Thesenderisresponsibleforshippingcharges,freight,insuranceandproperpackagingtopreventdamageintransit.

Thiswarrantydoesnotapplytodefectsresultingfromactionoftheusersuchasmisuse,improperwiring,operationoutsideof

specification,impropermaintenanceorrepair,orunauthorizedmodification.FLIRSystems,Inc.specificallydisclaimsanyimplied

warrantiesormerchantabilityorfitnessforaspecificpurposeandwillnotbeliableforanydirect,indirect,incidentalor

consequentialdamages.FLIR’stotalliabilityislimitedtorepairorreplacementoftheproduct.Thewarrantysetforthaboveis

inclusiveandnootherwarranty,whetherwrittenororal,isexpressedorimplied.

Calibration,Repair,andCustomerCareServices

FLIRSystems,Inc.offersrepairandcalibrationservicesfortheExtechInstrumentsproductswe

sell.NISTcertificationformostproductsisalsoprovided.CalltheCustomerServiceDepartmentfor

informationoncalibrationservicesavailableforthisproduct.Annualcalibrationsshouldbe

performedtoverifymeterperformanceandaccuracy.Technicalsupportandgeneralcustomer

serviceisalsoprovided,refertothecontactinformationprovidedbelow.

Allrightsreservedincludingtherightofreproductioninwholeorinpartinanyform

www.extech.com

SupportLines:U.S.(877)439‐8324;International:+1(603)324‐7800

TechnicalSupport:Option3;E‐mail:[email protected]

Repair&Returns:Option4;E‐mail:[email protected]

Productspecificationsaresubjecttochangewithoutnotice

Pleasevisitourwebsiteforthemostup‐to‐dateinformation

www.extech.com

FLIRCommercialSystems,Inc.,9TownsendWest,Nashua,NH03063USA

ISO9001Certified

Model 412300/355-EN V1.9 9/13

Garantie

FLIRSystems,Inc.garantitquecetappareilExtechInstrumentsestexemptdedéfautsmatériauxetdefabricationpendantun

anàpartirdeladated’envoi(unegarantielimitéedesixmoiss’appliqueauxcapteursetauxcâbles).Silerenvoidel’appareil

pourréparationdevientnécessairedurantouaprèslapériodedegarantie,contactezleserviceclientpourautorisation.Pour

obtenirlescoordonnées,visitezlesiteWebsuivant:www.extech.com.Unnumérod’autorisationderetour(AR)doitêtredélivré

avanttoutretourdeproduit.L’expéditeurprendàsachargelesfraisd’expédition,lefret,l’assuranceetl’emballagecorrectde

l’appareilafindeprévenirtoutedétériorationdurantletransport.Cettegarantienes’appliquepasauxdommagesimputablesà

l’utilisateur,telsquel’usageimpropreouabusif,unmauvaiscâblage,uneutilisationnonconformeauxspécifications,un

entretienouuneréparationincorrecte,outoutemodificationnonautorisée.FLIRSystems,Inc.déclineraspécifiquementtoute

garantieouqualitémarchandeouaptitudeàl’emploiprévu,etneseraenaucuncastenuresponsablepourtoutdommage

conséquent,direct,indirectouaccidentel.LaresponsabilitétotaledeFLIRestlimitéeàlaréparationouauremplacementdu

produit.Lagarantiedéfinieci‐dessusestinclusiveetaucuneautregarantie,écriteouorale,n’estexpriméeouimplicite.

Calibrage,réparationetservicesaprès‐vente

FLIRSystems,Inc.offredesservicesdecalibrageetderéparationpourlesproduitsExtech

Instrumentsquenouscommercialisons.NousfournissonségalementunecertificationNISTpourla

plupartdesproduits.Contacteznotreserviceclientpourtouteinformationsurlesservicesde

calibragedisponiblespourceproduit.Uncalibragedoitêtreeffectuéchaqueannéepourvérifier

lesperformancesetlaprécisiondumètre.Nousoffronségalementuneassistancetechniqueetun

serviceàlaclientèle.Veuillezvousreporterauxcoordonnéesfourniesci‐dessous.

Tousdroitsréservés,ycomprislareproductionpartielleoutotalesousquelqueformequecesoit.

www.extech.com

Lignesd’assistance:États‐Unis(877)439‐8324;international:+1(603)324‐7800

Serviced’assistancetechnique:Option3;E‐mail:[email protected]

Réparationsetretours:Option4;E‐mail:[email protected]

Lesspécificationsproduitsontsujettesàmodificationssanspréavis.

Pourlestoutesdernièresinformations,veuillezvisiternotresiteWeb.

www.extech.com

FLIRCommercialSystems,Inc.,9TownsendWest,Nashua,NH03063USA

CertifiéISO9001

Model 412300/355-EN V1.9 9/13

Garantía

FLIRSystems,Inc.,garantizaestedispositivomarcaExtechInstrumentsparaestarlibrededefectosenpartesomanodeobra

duranteunañoapartirdelafechadeembarque(seaplicaunagarantíalimitadadeseismesesparacablesysensores).Sifuera

necesarioregresarelinstrumentoparaservicioduranteodespuésdelperiododegarantía,llamealDepartamentodeServicioa

Clientesparaobtenerautorización.Visitewww.extech.comparaInformacióndecontacto.Sedebeexpedirunnúmerode

AutorizacióndeDevolución(AD)antesderegresarcualquierproducto.Elremitenteesresponsabledelosgastosdeembarque,

flete,seguroyempaqueapropiadoparaprevenirdañosentránsito.Estagarantíanoseaplicaadefectosresultantesdelas

accionesdelusuariocomoelmaluso,alambradoequivocado,operaciónfueradelasespecificaciones,mantenimientoo

reparacióninadecuadaomodificaciónnoautorizada.FLIRSystems,Inc.,rechazaespecíficamentecualesquiergarantías

implícitasofactibilidaddecomercializaciónoidoneidadparacualquierpropósitodeterminadoynoseráresponsablepor

cualesquierdañosdirectos,indirectos,incidentalesoconsecuentes.LaresponsabilidadtotaldeFLIRestálimitadaala

reparaciónoreemplazodelproducto.Lagarantíaprecedenteesinclusivaynohayotragarantíayaseaescritauoral,expresao

implícita.

Serviciosdecalibración,reparaciónyatenciónaclientes

FLIRSystems,Inc.,ofreceserviciosdereparaciónycalibraciónparalosproductosquevendemos

deExtechInstruments.AdemásofrecemoscertificaciónNISTparalamayoríadelosproductos.

LlamealDepartamentodeServicioalClienteparasolicitarinformacióndecalibraciónparaeste

producto.Paraverificarelfuncionamientoyprecisiónsedeberealizarlacalibraciónanual.Además

seproveeSoporteTécnicoyserviciosgeneralesalcliente,consultelainformacióndecontactoen

seguida.



Reservadostodoslosderechos,incluyendoelderechodereproduccióntotaloparcialencualquiermedio

www.extech.com

Líneasdesoporte:EE.UU.(877)439‐8324;Internacional:+1(603)324‐7800

SoporteTécnicoOpción3;correoelectrónico:[email protected]

Reparación/Devoluciones:Opción4;correoelectrónico:[email protected]

Lasespecificacionesdelproductoestánsujetasacambiossinaviso

PorfavorvisitenuestrapáginaenInternetparalainformaciónmásactualizada

www.extech.com

FLIRCommercialSystems,Inc.,9TownsendWest,Nashua,NH03063USA

CertificadoISO9001

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Extech Instruments Apparecchiature di prova

Extech Instruments

Extech Instruments 380366 Manuale utente

Extech Instruments

Extech Instruments IRC350 Manuale utente

Extech Instruments

Extech Instruments 412355A Manuale utente

Extech Instruments

Extech Instruments 380353 Manuale utente

Extech Instruments

Extech Instruments 7470 Manuale utente

Extech Instruments

Extech Instruments CG304 Manuale utente

Extech Instruments

Extech Instruments 480400 Manuale utente

Extech Instruments

Extech Instruments MG320 Manuale utente

Extech Instruments

Extech Instruments PRC15 Manuale utente

Extech Instruments

Extech Instruments 480403 Manuale utente

Extech Instruments

Extech Instruments 380395 Manuale utente

Extech Instruments

Extech Instruments ET60 Manuale utente

Extech Instruments

Extech Instruments RT30 Manuale utente

Extech Instruments

Extech Instruments ET10 Manuale utente

Extech Instruments

Extech Instruments HDV700 Manuale utente

Extech Instruments

Extech Instruments ExStik CL200 Manuale utente

Extech Instruments

Extech Instruments ET10 Manuale utente

Extech Instruments

Extech Instruments ET10 Manuale utente

Extech Instruments

Extech Instruments 7630 Manuale utente

Extech Instruments

Extech Instruments CB20 Manuale utente

Extech Instruments

Extech Instruments 380260-NIST Manuale utente

Extech Instruments

Extech Instruments PRC30 Manuale utente

Extech Instruments

Extech Instruments PRC10 Manuale utente

Extech Instruments

Extech Instruments BR90 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente