Extron electronics HD CTL 100 Manuale utente

IMPORTANT:

Go to www.extron.com for the

complete user guide and installation

instructions before connecting the

product to the power source.

HD CTL 100 Workspace Controller • Setup Guide

Attaching a Logitech®SmartDock

This supplementary setup guide provides instructions for

setting up the HD CTL 100 with the Logitech SmartDock.

The Extron HD CTL 100 is a compact workspace controller

designed for automatic display control in small meeting

rooms and huddle spaces. It features an HDMI pass-through

port that detects signal presence and can facilitate automatic

display power. When an active signal is connected to the

HDMI input from the Logitech SmartDock, the HD CTL 100

automatically turns on the display via CEC control. When

no signal is detected, the HD CTL 100 powers off the display

after a predetermined period.

NOTE: For more details about installation, conguration,

and operation, see the HD CTL 100 User Guide,

available at www.extron.com.

HD CTL 100 Panels

The front and rear panel connectors include:

POWER

12V

0.3A MAX

INPUT

OUTPUT

+V OUTDIGITAL I / O

HDMI/CECHDMI

G24

IR / S

21G43G

E F

CONFIG

RSIGNAL

HD CTL 100

Rear Panel Front Panel

APower input connector EVoltage output connector HReset button

BHDMI input connector FIR/S control connector IUSB configuration port

CHDMI/CEC output connector GPower LED JSignal LED

DDigital I/O ports

Figure 1. HD CTL 100 Rear and Front Panels

Connecting the Logitech SmartDock to the HD CTL 100

1. Connect the supplied Logitech power supply to the SmartDock PWR connector (see figure2).

Figure 2. SmartDock Rear Connections

2. If needed, the SmartDock offers the ability for external source devices to be presented on the presentation display. Connect

a source device, such as a laptop, to the HDMI IN connector of the SmartDock. If using a Logitech MeetUp camera, connect

the device to a USB port on the SmartDock.

RegionalSales

120

150 SOUTH

NORTH

EAST

WEST

logitech

Logitech

SmartDock

Laptop

(HDMI)

HD CTL 100

(HDMI & CEC)

logitech

Logitech

MeetUp

Example of Logitech SmartDock Room Setup

HD CTL 100 attaching a Logitech SmartDock • Setup Guide (Continued)

3. For a single display system, connect an HDMI cable from either of the SmartDock HDMI OUT connectors to the Input

connector on the HD CTL 100 (see figure2 and figure3).

POWER

12V

0.3A MAX

INPUT

OUTPUT

+V OUTDIGITAL I / O

HDMI/CECHDMI

G24

IR /S

21G 43G

HD CTL 100

HDMI

Logitech SmartDock

Laptop

HDMI/CEC

Logitech MeetUp

USB

logitech

Display

FLATPANEL

Figure 3. HD CTL 100 Cabling Diagram (Single Display)

4. For a Dual Display system, you will need a second HD CTL 100. Connect HDMI cables from both of the SmartDock HDMI

OUT connectors to the Input connectors of the two HD CTL 100s (see figure2 and figure4).

POWER

12V

0.3A MAX

INPUT

OUTPUT

+V OUTDIGITAL I / O

HDMI/CECHDMI

G24

IR / S

21G 43G

HD CTL 100

HDMI

Logitech SmartDock

Laptop

HDMI/CEC

POWER

12V

0.3A MAX

INPUT

OUTPUT

+V OUTDIGITAL I / O

HDMI/CECHDMI

G24

IR / S

21G 43G

HDMI

HDMI/CEC

HD CTL 100

Logitech

MeetUp

USB

logitech

itech

ech

itech

logitech

logitec

ogitec

logitech

DisplayDisplay

FLATPANEL FLAT PANEL

Figure 4. HD CTL 100 Cabling Diagram (Dual Display)

NOTE: Figure 3 and ﬁgure4 above illustrate cabling diagrams showing the laptop (source device), the SmartDock, the

HD CTL 100s, a Logitech MeetUp camera, and the displays. The control of each display is via CEC. For displays that have

limited or no CEC control, use software to congure the HD CTL 100 to communicate to the display via IR or one-way serial

control.

SmartDock System Setup Conﬁguration

1. With the SmartDock powered up, select the More icon (1) at the bottom right of the main presentation window.

2. Select Settings (2). (Enter Admin credentials if needed.)

3. Select Windows Settings (3) from the menu on the left of the screen.

4. From the window to the right of that screen, select Go to Admin Sign-in (4).

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

68-3064-51 Rev. B

12 19

HD CTL 100 attaching a Logitech SmartDock • Setup Guide (Continued)

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the

Extron Safety and Regulatory Compliance Guide on the Extron website.

5. On the Windows login page, select the appropriate user account to sign in as administrator and enter Administrator

credentials (5). Select the Right Arrow when done.

6. From the Windows Start menu in the lower left corner, select Settings (6) from the list of applications.

7. Select System (7).

8. To ensure the system turns off the presentation display when not in use, select Power & sleep on the System menu.

The Screen times (8) have to be set for a specific value (something other than Never) using the drop-down list. The

suggested Screen time is 10 minutes for both battery and plugged-in power. If available on that page, Sleep and

Network Connections should be set to Never.

9. The video outputs a wake display signal to the HD CTL 100 when the Logitech SmartDock detects motion from the frontward

located sensor. The HD CTL 100 sends a power command to the display, and the main Skype®Room screen is displayed on

the display monitor.

NOTE: Plugging in a source device, such as a laptop, when the screen is in sleep mode, does not wake the SmartDock.

Indice

Altri manuali Extron electronics Sistema di controllo

Extron electronics

Extron electronics TouchLink Manuale utente

Extron electronics

Extron electronics IPL EXP I/O Series Manuale utente

Extron electronics

Extron electronics TouchLink TLP 350CV Manuale utente

Extron electronics

Extron electronics TLI Pro 201 Manuale utente

Extron electronics

Extron electronics TouchLink TLP Pro 725C Series Manuale utente

Extron electronics

Extron electronics TouchLink TLC Pro 526M Series Manuale utente

Extron electronics

Extron electronics TLP 1000MV Manuale utente

Extron electronics

Extron electronics TLI Pro 101 Manuale utente

Extron electronics

Extron electronics TouchLink TLP Pro 520M Manuale utente

Extron electronics

Extron electronics TouchLink TLP Pro 525C Series Manuale utente

Extron electronics

Extron electronics TouchLink TLP Pro 520M Manuale utente

Extron electronics

Extron electronics TLP Pro 525 Series Manuale utente

Extron electronics

Extron electronics VCA 100 Manuale utente

Extron electronics

Extron electronics TLS 520M Manuale utente

Extron electronics

Extron electronics TLC Pro 526M Series Manuale utente

Extron electronics

Extron electronics TouchLink Pro Manuale utente

Extron electronics

Extron electronics TLP Pro 720M Manuale utente

Extron electronics

Extron electronics TLI Pro 201 Manuale utente

Extron electronics

Extron electronics HD CTL 100 Manuale utente

Extron electronics

Extron electronics EBP 100 Manuale utente

Extron electronics

Extron electronics TouchLink TLP Pro 1220 Series Manuale utente

Manuali Sistema di controllo popolari di altre marche

Pentair Pool Products

Pentair Pool Products Compool Manuale utente

ComfortNET

ComfortNET CTK04 Manuale utente

Fireye

Fireye InSight II 95DSS3 Manuale utente

CAME

CAME G3000 Manuale utente

Idemia

Idemia MorphoAccess VP MD Manuale utente

Axis

Axis P1445-LE-3 Manuale utente

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuale utente

CNC-Step

CNC-Step High-Z T-Series Manuale utente

Doosan

Doosan DVF Series Manuale utente

Honeywell

Honeywell KAP 140 Manuale utente

Honeywell

Honeywell vk41 series Manuale utente

AirBench

AirBench FPW Guida all'installazione

Cypress

Cypress HHR-3160 Manuale utente

CAME

CAME GLT40AOS Manuale utente

Zonex

Zonex GEN II -VVT Guida utente

Altronics

Altronics K 9650 Manuale utente

micro-trak

micro-trak RoadMaster Manuale utente

micro-trak

micro-trak Calc-An-Acre II Manuale utente